Hovatek Forum DEVELOPMENT Android [Development] Mediatek (MTK) Auto Philz recovery porter by Team Hovatek
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Development] Mediatek (MTK) Auto Philz recovery porter by Team Hovatek

[Development] Mediatek (MTK) Auto Philz recovery porter by Team Hovatek

Pages (22): Previous 13 4 5 6 722 Next
hovatek
hovatek
hovatek
Administrator
49,570
27-01-2018, 10:28 AM
#41



(27-01-2018, 10:24 AM)paeffiong Please what i meant here is that i experienced the error while using V1. 0 and also That the tool is not able to create a recovery for GIONEE M3.

What error do you get when porting for Gionee M3?
And do you encounter same with TWRP porter?
This post was last modified: 27-01-2018, 10:29 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 10:30 AM
#42
(27-01-2018, 10:20 AM)hovatek
(26-01-2018, 11:30 PM)paeffiong One of the issues discovered while using the philz recovery was that it wasn't able to flash MM and NOUGAT custom ROMs.

I had to reflashed my TWRP recovery and that was when the ROM was able to flashed.

I will try flashing those ROMS again using this ported recovery.

Thanks once again

This is a known limitation in Philz. Even some custom roms / flashable zips only work in certain versions of TWRP.
We'll look into upgrading the Philz version in future releases


Waiting patiently to get a positive feedback from you upon upgrading the tool.
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 10:33 AM
#43
(27-01-2018, 10:28 AM)hovatek
(27-01-2018, 10:24 AM)paeffiong Please what i meant here is that i experienced the error while using V1. 0 and also That the tool is not able to create a recovery for GIONEE M3.

What error do you get when porting for Gionee M3?
And do you encounter same with TWRP porter?


The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.
hovatek
hovatek
hovatek
Administrator
49,570
27-01-2018, 10:45 AM
#44
(27-01-2018, 10:33 AM)paeffiong The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.

I believe I know the source of the problem. We'll address it in the next release

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 10:51 AM
#45



(27-01-2018, 10:28 AM)hovatek
(27-01-2018, 10:24 AM)paeffiong Please what i meant here is that i experienced the error while using V1. 0 and also That the tool is not able to create a recovery for GIONEE M3.

What error do you get when porting for Gionee M3?
And do you encounter same with TWRP porter?


The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.


Lemme switch on my laptop and use the two tools once again on GIONEE M3.

VIA Philz v1. 2 = works fine with selected GIONEE M3 recovery.

Via TWRP V1. 0 = works fine but recovery size is greatly increased from 5.03MB to 11.4MB

I want to conclude my observations by stating that the GIONEE M3 issue to related to a particular recovery since i have tried with 2 different recovery.img and one out of the two works fine. The other one has no file in the output folder.
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 10:56 AM
#46
(27-01-2018, 10:45 AM)hovatek
(27-01-2018, 10:33 AM)paeffiong The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.

I believe I know the source of the problem. We'll address it in the next release


Thanks for always being there for us. Waiting patiently for the release of the upgrade
ryfoz
ryfoz
ryfoz
Senior Member
297
27-01-2018, 04:02 PM
#47
(27-01-2018, 10:51 AM)paeffiong [


The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.


Lemme switch on my laptop and use the two tools once again on GIONEE M3.

VIA Philz v1. 2 = works fine with selected GIONEE M3 recovery.

Via TWRP V1. 0 = works fine but recovery size is greatly increased from 5.03MB to 11.4MB

I want to conclude my observations by stating that the GIONEE M3 issue to related to a particular recovery since i have tried with 2 different recovery.img and one out of the two works fine. The other one has no file in the output folder.

How did you create TWRP recovery?
ryfoz
ryfoz
ryfoz
Senior Member
297
27-01-2018, 04:04 PM
#48
As far as I am concerned, none of the versions worked for me, despite the fact that I painstakingly tried them as instructed.

I am still hoping for the new release but I prefer TWRP to Philz recovery.
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 09:36 PM
#49
(27-01-2018, 04:02 PM)ryfoz
(27-01-2018, 10:51 AM)paeffiong [


The error is same as what others have said already,no file in the output folder and the time used by the tool is very very short.


Lemme switch on my laptop and use the two tools once again on GIONEE M3.

VIA Philz v1. 2 = works fine with selected GIONEE M3 recovery.

Via TWRP V1. 0 = works fine but recovery size is greatly increased from 5.03MB to 11.4MB

I want to conclude my observations by stating that the GIONEE M3 issue to related to a particular recovery since i have tried with 2 different recovery.img and one out of the two works fine. The other one has no file in the output folder.

How did you create TWRP recovery?


I simply followed the steps as outlined
paeffiong
paeffiong
paeffiong
Senior Member
138
27-01-2018, 09:41 PM
#50



What's the name of your phone and if possible, upload the recovery image and forward the link to me.

Have been busy all day busy trying to port the ColtOS ROM for my phone ULEFONE TIGER
Pages (22): Previous 13 4 5 6 722 Next
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram