Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Development] I need help Phillips ROM ported to Tecno H6

#1

Hi, I managed to port a Phillips ROM for Gionee M3 but i have one problem, everything works fine apart from my navigation keys (home, back and context).
Any help/direction on this will be appreciated. Will upload it once that bug is fixed


Reply
#2
(This post was last modified: 03-28-2015, 02:46 PM by hovatek. )
(03-28-2015, 10:18 AM)timcyprian Wrote: Hi, I managed to port a Phillips ROM for Gionee M3 but i have one problem, everything works fine apart from my navigation keys (home, back and context).
Any help/direction on this will be appreciated. Will upload it once that bug is fixed
Are you using a protector / case on the phone?
likely looking at a kernel issue though
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(03-28-2015, 02:43 PM)hovatek Wrote:
(03-28-2015, 10:18 AM)timcyprian Wrote: Hi, I managed to port a Phillips ROM for Gionee M3 but i have one problem, everything works fine apart from my navigation keys (home, back and context).
Any help/direction on this will be appreciated. Will upload it once that bug is fixed
Are you using a protector / case on the phone?
likely looking at a kernel issue though

Am not using any protector, its the way i bought it
Reply
#4
(03-29-2015, 12:12 PM)timcyprian Wrote: Am not using any protector, its the way i bought it

It's your kernel. Focus on the boot.img

Sent from my itel it1452 using Hovatek mobile
Reply
#5
Which files aand folders did you copy /system/lib /system/lib/vendor /system/lib/hw and /sytem/etc/usr/Generic.kl

Reply
#6
(03-30-2015, 07:20 AM)androgen Wrote: Which files aand folders did you copy /system/lib /system/lib/vendor /system/lib/hw and /sytem/etc/usr/Generic.kl


Here is the procedure i used:

  • Open stock ROM and port rom in separate window. Delete if the miui rom contains any uboot.img or recovery.img files.
  • Delete the folder "firmware" folder from port ROM \system\etc" & Copy "firmware" folderfrom " Stock\system\etc" to "port ROM\system\etc"
  • Copy all files from "\system\lib\HW" and replace to "port ROM\system\lib\HW"
  • Replace libcamalgo.so and libcameracustom.so files from" \system\lib" and replace to " port ROM \system\lib"
  • Replace mtk_stp_wmt.ko file from "Stock\system\lib\modules" and replace to "port rom\system\lib\modules"
  • Replace boot.img from stock to port.
Reply
#7
Copy /system/bin and /vendor folder.
Reply










Users browsing this thread:
1 Guest(s)