Hovatek Forum MOBILE Android teno m5 fake (spd) pattern unlock
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


teno m5 fake (spd) pattern unlock

teno m5 fake (spd) pattern unlock

umfah
umfah
umfah
Senior Member
143
26-12-2017, 03:34 PM
#1



pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
26-12-2017, 03:39 PM
#2
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box
umfah
umfah
umfah
Senior Member
143
26-12-2017, 03:42 PM
#3
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
26-12-2017, 03:48 PM
#4
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
[/quote]
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
umfah
umfah
umfah
Senior Member
143
26-12-2017, 03:58 PM
#5



(26-12-2017, 03:48 PM)droidmobitech
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
[/quote]
PCBBig GrinC2628_MAINPCB_V1.0.0 2015.04.24
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
26-12-2017, 04:10 PM
#6
(26-12-2017, 03:48 PM)droidmobitech
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
[/quote]
PCBBig GrinC2628_MAINPCB_V1.0.0 2015.04.24
[/quote]
On flash ICs /EMMCs should be written the very type of spreadtrum e.g. SCXXXX
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
26-12-2017, 04:15 PM
#7
You can check this link too

https://hm2s.life/tecno-m5-clone-pac-fil...flash-file
umfah
umfah
umfah
Senior Member
143
26-12-2017, 04:28 PM
#8
(26-12-2017, 04:10 PM)droidmobitech
(26-12-2017, 03:48 PM)droidmobitech
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
PCBBig GrinC2628_MAINPCB_V1.0.0 2015.04.24
[/quote]
On flash ICs /EMMCs should be written the very type of spreadtrum e.g. SCXXXX
[/quote]
spreadtrum 6825c
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
26-12-2017, 04:31 PM
#9
(26-12-2017, 04:10 PM)droidmobitech
(26-12-2017, 03:48 PM)droidmobitech
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
PCBBig GrinC2628_MAINPCB_V1.0.0 2015.04.24
[/quote]
On flash ICs /EMMCs should be written the very type of spreadtrum e.g. SCXXXX
[/quote]
spreadtrum 6825c
[/quote]
So your boot is probably SC6825c....
If non of the boxes listed above supports SC6825c then I think you should consider using the SPD DIAG V2 TOOL to perform hard reset
This post was last modified: 26-12-2017, 04:32 PM by droidmobitech.
umfah
umfah
umfah
Senior Member
143
26-12-2017, 04:34 PM
#10



(26-12-2017, 04:31 PM)droidmobitech
(26-12-2017, 04:10 PM)droidmobitech
(26-12-2017, 03:48 PM)droidmobitech
(26-12-2017, 03:39 PM)droidmobitech
(26-12-2017, 03:34 PM)umfah pls sir i want to pattern unlock tecno m5 spd, i have tried with miracle box,cm2,volcano but no success. the main problem i dont know the exact cpu type. i need your help.

Post log of read info from cm2 or miracle box

NONE OF THESE BOX CAN EVEN READ IT INFO. I DONT KNOW WHAT THE BOOT TYPE. BUT I HAVE DIFFERENT BOOT
In your case, I suppose it's a newer spreadtrum boot.

In that case; post picture of inner sticker or
if possible , You can also disassemble and check on PCB for cpu type and other information

Otherwise
Use SPD DIAG v2 tool, to perform factory reset or reboot device into recovery mode
PCBBig GrinC2628_MAINPCB_V1.0.0 2015.04.24
On flash ICs /EMMCs should be written the very type of spreadtrum e.g. SCXXXX
[/quote]
spreadtrum 6825c
[/quote]
So your boot is probably SC6825c....
If non of the boxes listed above supports SC6825c then I think you should consider using the SPD DIAG V2 TOOL to perform hard reset
[/quote]

ok i will try.
thank
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram