[Development] Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
[Development] Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
(07-05-2020, 05:56 PM)Mitchie Boom Hello... I successfully ported a TWRP from stock recovery however when I'm going to flash an image there is no any partitions like system partition to select... what should I do?
(08-05-2020, 12:07 PM)X3nonSir, thank you for the reply, can you elaborate or explain where to go or what app should I use to add the flashimg=1?(07-05-2020, 05:56 PM)Mitchie Boom Hello... I successfully ported a TWRP from stock recovery however when I'm going to flash an image there is no any partitions like system partition to select... what should I do?
add the ;flashimg=1 flags section in ramdisk/etc/recovery.fstab to the partitions you intend to flash image files
e.g
/system ext4 /dev/block/system flags=backup=1;flashimg=1
if you have any further problems then create a new thread by clicking "ask question" at the top
(08-05-2020, 01:25 PM)Mitchie Boom Sir, thank you for the reply, can you elaborate or explain where to go or what app should I use to add the flashimg=1?