Hovatek Forum MOBILE Android [Please help] e1207y dead after flash
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] e1207y dead after flash

[Please help] e1207y dead after flash

Hanad777
Hanad777
Hanad777
Enthusiastic Member
12
06-04-2018, 12:34 PM
#1



Confused Confused  can any one help me i was flashing E1207y dual  via miracle crack when flashing is done the phone doesnT power on i thing it was dead what can i do to retrive my phone plz help me
xerxes
xerxes
xerxes
Senior Member
8,355
06-04-2018, 02:59 PM
#2
(06-04-2018, 12:34 PM)Hanad777 Confused Confused  can any one help me i was flashing E1207y dual  via miracle crack when flashing is done the phone doesnT power on i thing it was dead what can i do to retrive my phone plz help me

What was wrong with the phone before flashing?
Did you take note of the phone's build no. before flashing it?
Take out/reinsert the battery then try powering up the phone.
Hanad777
Hanad777
Hanad777
Enthusiastic Member
12
06-04-2018, 11:34 PM
#3
(06-04-2018, 02:59 PM)innagee
(06-04-2018, 12:34 PM)Hanad777 Confused Confused  can any one help me i was flashing E1207y dual  via miracle crack when flashing is done the phone doesnT power on i thing it was dead what can i do to retrive my phone plz help me

What was wrong with the phone before flashing?
Did you take note of the phone's build no. before flashing it?
Take out/reinsert the battery then try powering up the phone.
phone lock then i try to flash when flash is done my phone wont power on again
Hanad777
Hanad777
Hanad777
Enthusiastic Member
12
06-04-2018, 11:45 PM
#4
(06-04-2018, 11:34 PM)Hanad777
(06-04-2018, 02:59 PM)innagee
(06-04-2018, 12:34 PM)Hanad777 Confused Confused  can any one help me i was flashing E1207y dual  via miracle crack when flashing is done the phone doesnT power on i thing it was dead what can i do to retrive my phone plz help me

What was wrong with the phone before flashing?
Did you take note of the phone's build no. before flashing it?
Take out/reinsert the battery then try powering up the phone.
{phone lock } yess i take build number then i run mircalce crack then suddenly i select error jibset my jipset is spd the one i selected is mtk that coused the problem plz can u help me 
xerxes
xerxes
xerxes
Senior Member
8,355
07-04-2018, 09:57 AM
#5



(06-04-2018, 11:45 PM)Hanad777 {phone lock } yess i take build number then i run mircalce crack then suddenly i select error jibset my jipset is spd the one i selected is mtk that coused the problem plz can u help me 

What's the phone's build no.
Also, selecting a wrong CPU/chipset should not be the problem. In fact, if your device is mtk and you selected spd, miracle will not even connect/detect your phone.
hovatek
hovatek
hovatek
Administrator
49,570
07-04-2018, 11:26 AM
#6
(06-04-2018, 11:45 PM)Hanad777 {phone lock } yess i take build number then i run mircalce crack then suddenly i select error jibset my jipset is spd the one i selected is mtk that coused the problem plz can u help me 

From what you've described, I don't think flashing occurred at all. Maybe the error caused the phone to go dead (refer to https://www.hovatek.com/forum/thread-808.html )
You need to clarify if flashing actually started / completed at all or if you got an error message before the phone went dead.
Details please

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Hanad777
Hanad777
Hanad777
Enthusiastic Member
12
07-04-2018, 01:55 PM
#7
(07-04-2018, 11:26 AM)hovatek
(06-04-2018, 11:45 PM)Hanad777 {phone lock } yess i take build number then i run mircalce crack then suddenly i select error jibset my jipset is spd the one i selected is mtk that coused the problem plz can u help me 

From what you've described, I don't think flashing occurred at all. Maybe the error caused the phone to go dead (refer to https://www.hovatek.com/forum/thread-808.html )
You need to clarify if flashing actually started / completed at all or if you got an error message before the phone went dead.
Details please 
first the flashing started bro when it finished the phone doesn power on 
the link u give is telling me to press and hold power button and volume but this phone doesnt have volume buttons
Attached Files
.jpg
Samsung-Guru-E1207Y.jpg
Size: 18.95 KB / Downloads: 4
X3non
X3non
X3non
Recognized Contributor
22,062
07-04-2018, 04:31 PM
#8
(07-04-2018, 01:55 PM)Hanad777 first the flashing started bro when it finished the phone doesn power on 
the link u give is telling me to press and hold power button and volume but this phone doesnt have volume buttons

if flashing was successful, then take out / reinsert the battery and leave the phone to charge for some hours
if it still doesn't power on, then you'll need to look for and flash another rom from a different source
This post was last modified: 07-04-2018, 04:33 PM by X3non.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram