[Please help] Update : SPF Tool Error: now- ERROR 6010 CODE DOWNLOAD FORBIDDEN
[Please help] Update : SPF Tool Error: now- ERROR 6010 CODE DOWNLOAD FORBIDDEN
(07-05-2018, 05:28 PM)X3non(06-05-2018, 01:33 AM)marczL Unfortunately, I don't have access. Have no acquaintance having the same phone.
we're now trying to verify if the phone really uses secureboot and requires custom DA
do you have a hardware box / dongle or know someone that has one?
if its really secureboot then its only fixable if you can find a custom DA that will work for your device
(08-05-2018, 01:32 AM)marczL I have Miracle Box and NCK Dongle..what shall I do to verify if it's secureboot? thanks,
(09-05-2018, 02:49 PM)EMMANUS I think your best set of options now are;
1) open the phone, pull the battery, format and download with all the file boxes ticked.
2) without opening the phone, format first using the format tab i.e format everything including bootloader, then go to download tab and download everything
Note: before you do the second option, make sure the file you have is correct
I guess that would be my last resort. T_T
(09-05-2018, 02:49 PM)EMMANUS I think your best set of options now are;
1) open the phone, pull the battery, format and download with all the file boxes ticked.
2) without opening the phone, format first using the format tab i.e format everything including bootloader, then go to download tab and download everything
Note: before you do the second option, make sure the file you have is correct
(21-05-2018, 06:29 AM)marczL Update: I untick Preloader again since bootloader is locked and then this error occurred.
BROM ERROR: S_SECURITY_SECURE_USB_DL_IMGAE_SIGNATURE_VERIFY_FAIL (6046)
(21-05-2018, 01:48 PM)hovatek(21-05-2018, 06:29 AM)marczL Update: I untick Preloader again since bootloader is locked and then this error occurred.
BROM ERROR: S_SECURITY_SECURE_USB_DL_IMGAE_SIGNATURE_VERIFY_FAIL (6046)
Have you tried the fixes @ https://www.hovatek.com/forum/thread-439.html ?
(08-05-2018, 03:33 PM)X3non(08-05-2018, 01:32 AM)marczL I have Miracle Box and NCK Dongle..what shall I do to verify if it's secureboot? thanks,
i was referring to the latest version along with the hardware dongle not the versions with loader
if you have then try dumping the firmware from the phone using the tool, if its then you should get a secureboot error message in the logs
(22-05-2018, 06:53 AM)marczLCode:Hi Sir, here is the log when I dumped phone's firmware.
Will be used loader: MTK_AllInOne_DA_SP.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (117Gb+8192Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM7)
Detected partitions count: 27
Start dumping flash, this can take up to 1 hour.......
Start procesing PRELOADER ......
Start procesing MBR ......
Reading: BEGIN: 0xc00000 - LEN: 0x200
Start procesing EBR1 ......
Reading: BEGIN: 0xc80000 - LEN: 0x200
Start procesing PRO_INFO ......
Reading: BEGIN: 0xd00000 - LEN: 0x300000
Start procesing NVRAM ......
Reading: BEGIN: 0x1000000 - LEN: 0x500000
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1500000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1f00000 - LEN: 0xa00000
Start procesing UBOOT ......
Start procesing BOOTIMG ......
Reading: BEGIN: 0x2980000 - LEN: 0x600000
Start procesing RECOVERY ......
Reading: BEGIN: 0x2f80000 - LEN: 0x600000
Start procesing SEC_RO ......
Reading: BEGIN: 0x3580000 - LEN: 0x600000
Start procesing LOGO ......
Start procesing EBR2 ......
Reading: BEGIN: 0x3f00000 - LEN: 0x200
Start procesing EBR3 ......
Reading: BEGIN: 0x3f80000 - LEN: 0x200
Start procesing CUSTOM ......
Reading: BEGIN: 0x4000000 - LEN: 0xc800000
Start procesing NFFLOG ......
Reading: BEGIN: 0x10800000 - LEN: 0x2f00000
Start procesing BAK ......
Reading: BEGIN: 0x13700000 - LEN: 0x800000
Start procesing SIMLOCK ......
Reading: BEGIN: 0x13f00000 - LEN: 0xa00000
Start procesing DEVICESLOG ......
Reading: BEGIN: 0x14900000 - LEN: 0x6400000
Start procesing FRP ......
Reading: BEGIN: 0x1b700000 - LEN: 0x100000
Start procesing ANDROID ......
Reading: BEGIN: 0x1b800000 - LEN: 0xc0000000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Saved to : C:\Users\UserPC\Documents\Android_MTK\firmware_backup\0-By CPU_MT6582_05_22_2018_13_36_31
Wait untill phone will start charging.
All done.