Hovatek Forum HARDWARE SIM / Network unlock HUAWEI E5573Cs-322 PROBLEM
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


HUAWEI E5573Cs-322 PROBLEM

HUAWEI E5573Cs-322 PROBLEM

Pages (2): Previous 1 2
X3non
X3non
X3non
Recognized Contributor
22,062
09-05-2018, 05:12 PM
#11



(09-05-2018, 12:42 AM)Iken99 ok, thanks. is there anyway to reset the lock counter??

no
wilfem
wilfem
wilfem
Junior Member
21
15-06-2018, 03:42 PM
#12
Hello bro, I have exactly the same issue, but I later discovered that the problem was with the Software version of the mifi and not the lock counter as you initially thought.
Meanwhile I'm still searching for a way to unlock this particular one.
X3non
X3non
X3non
Recognized Contributor
22,062
18-06-2018, 03:42 PM
#13
(15-06-2018, 03:42 PM)wilfem Hello bro, I have exactly the same issue, but I later discovered that the problem was with the Software version of the mifi and not the lock counter as you initially thought.
Meanwhile I'm still searching for a way to unlock this particular one.

there's no means of resetting the counter if you still have more questions then create a new thread, see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Ade002
Ade002
Ade002
Newbie
1
01-04-2019, 05:56 AM
#14
Please help my Huawei E5573cs-322 blinking green lights and refuses to show signal again. I need help please
X3non
X3non
X3non
Recognized Contributor
22,062
01-04-2019, 10:25 AM
#15



(01-04-2019, 05:56 AM)Ade002 Please help my Huawei E5573cs-322 blinking green lights and refuses to show signal again. I need help please

reflash only the first of the two firmware you flashed and everything should work fine
if you still have problems then create a new thread for your device issue, this is someone else's support thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
skilar
skilar
skilar
Newbie
4
30-07-2019, 04:53 PM
#16
(08-05-2018, 05:11 PM)X3non
(08-05-2018, 07:37 AM)Iken99 this picture will tell you everything.

this unlock method that involves bootshot and flashing loader doesn't work on devices using latest SW version. you might have seen it if you went through the guide at https://www.hovatek.com/forum/thread-16772.html
      Ok but if we do this open, pin short and flash how is possible to fix t or I need a backup before flashing usbloader.bin.
I saw the  NV memory after the flash she was all 0 is this what USB loader does or is because of write protection on newer rebrander firmware.?
This post was last modified: 30-07-2019, 04:54 PM by skilar.
X3non
X3non
X3non
Recognized Contributor
22,062
31-07-2019, 11:10 AM
#17
(30-07-2019, 04:53 PM)skilar       Ok but if we do this open, pin short and flash how is possible to fix t or I need a backup before flashing usbloader.bin.
I saw the  NV memory after the flash she was all 0 is this what USB loader does or is because of write protection on newer rebrander firmware.?

usbloader erases everything including nv, usblsafe doesn't
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram