Hovatek Forum MOBILE Android [Please help] i have dead tecno w3 lte
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] i have dead tecno w3 lte

[Please help] i have dead tecno w3 lte

22-05-2018, 02:40 AM
#1



hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???
hovatek
hovatek
hovatek
Administrator
49,570
22-05-2018, 10:08 AM
#2
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???

1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
23-05-2018, 10:57 PM
#3
(22-05-2018, 10:08 AM)hovatek
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???

1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?

IT WAS IN MY BACK BOKET,
NO IHAVE NOT BACK UP
 NO I HAVE NOT NCK BOX, BUT I HAVE IT AS SOFTWEAR IN MY PC
24-05-2018, 02:55 AM
#4
(22-05-2018, 10:08 AM)hovatek
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???

1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?
my mainboard is d2 not d1
xerxes
xerxes
xerxes
Senior Member
8,355
24-05-2018, 01:12 PM
#5



(23-05-2018, 10:57 PM)Koko Logy Moaiad
(22-05-2018, 10:08 AM)hovatek
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???

1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?

IT WAS IN MY BACK BOKET,
NO IHAVE NOT BACK UP
 NO I HAVE NOT NCK BOX, BUT I HAVE IT AS SOFTWEAR IN MY PC

Dump the phone's firmware in scatter format using miracle @ https://www.hovatek.com/forum/thread-13347.html
Then get the phone's build no using build.prop method @ https://www.hovatek.com/forum/thread-16095.html .
Let's know once successful.
This post was last modified: 24-05-2018, 01:13 PM by xerxes.
hovatek
hovatek
hovatek
Administrator
49,570
25-05-2018, 09:02 AM
#6
You could also read info using Miracle Box to get the phone details

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
25-05-2018, 11:44 PM
#7
(24-05-2018, 01:12 PM)innagee
(23-05-2018, 10:57 PM)Koko Logy Moaiad
(22-05-2018, 10:08 AM)hovatek
(22-05-2018, 02:40 AM)Koko Logy Moaiad hi. i have bought my tecno w3lte from egypt from orang company and it stoped on tecno logo. i have no idea about its stok rom and i cnnt access factory rest by power and volume keyes. i trayied to formmat it with sp or nck but i cant .its was working in hios 1.0.0 what can i do???

1. How exactly did it get stuck at logo
2. Have you backed up the firmware (even in its bricked state)
3. Do you have the NCK hardware box?

IT WAS IN MY BACK BOKET,
NO IHAVE NOT BACK UP
 NO I HAVE NOT NCK BOX, BUT I HAVE IT AS SOFTWEAR IN MY PC

Dump the phone's firmware in scatter format using miracle
Let's know once successful.

i dump my phone in nck EMMC: (57Gb+8192Mb) KSI 0x454838434538 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 70010045483843 : 000000000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM22)
 Detected partitions count: 23
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo ......
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start procesing nvram ......
 Reading:  BEGIN: 0x380000         - LEN: 0x500000        
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start procesing lk ......
 Start procesing boot ......
 Reading:  BEGIN: 0x1d80000        - LEN: 0x1000000       
 Start procesing recovery ......
 Reading:  BEGIN: 0x2d80000        - LEN: 0x1000000       
 Start procesing logo ......
 Start procesing oemkeystore ......
 Reading:  BEGIN: 0x5000000        - LEN: 0x200000        
 Start procesing secro ......
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000        
 Start procesing keystore ......
 Reading:  BEGIN: 0x5800000        - LEN: 0x800000        
 Start procesing tee1 ......
 Reading:  BEGIN: 0x6000000        - LEN: 0x500000        
 Start procesing tee2 ......
 Reading:  BEGIN: 0x6500000        - LEN: 0x500000        
 Start procesing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000        
 Start procesing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start procesing metadata ......
 Reading:  BEGIN: 0x8b00000        - LEN: 0x2500000       
 Start procesing system ......
 Reading:  BEGIN: 0xb000000        - LEN: 0xc0000000      
 Backup cache disabled, we will skip it....
 Backup userdata disabled, we will skip it....
 Saved to : C:\Users\klm.KLM-PC\Documents\Android_MTK\firmware_backup\0-By CPU_MT6735_05_26_2018_00_05_51
 Wait untill phone will start charging.
 All done.


the backup have scatter file . but all file have no exetion not img or bin or no thing .what now??
hovatek
hovatek
hovatek
Administrator
49,570
26-05-2018, 11:52 AM
#8
(25-05-2018, 11:44 PM)Koko Logy Moaiad
Code:

i dump my phone in nck EMMC: (57Gb+8192Mb) KSI 0x454838434538 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 70010045483843 : 000000000000000000
 EMMC UA SIZE: 0x1c8000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1c8c00000      [7.137 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM22)
 Detected partitions count: 23
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo ......
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start procesing nvram ......
 Reading:  BEGIN: 0x380000         - LEN: 0x500000        
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start procesing lk ......
 Start procesing boot ......
 Reading:  BEGIN: 0x1d80000        - LEN: 0x1000000       
 Start procesing recovery ......
 Reading:  BEGIN: 0x2d80000        - LEN: 0x1000000       
 Start procesing logo ......
 Start procesing oemkeystore ......
 Reading:  BEGIN: 0x5000000        - LEN: 0x200000        
 Start procesing secro ......
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000        
 Start procesing keystore ......
 Reading:  BEGIN: 0x5800000        - LEN: 0x800000        
 Start procesing tee1 ......
 Reading:  BEGIN: 0x6000000        - LEN: 0x500000        
 Start procesing tee2 ......
 Reading:  BEGIN: 0x6500000        - LEN: 0x500000        
 Start procesing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000        
 Start procesing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start procesing metadata ......
 Reading:  BEGIN: 0x8b00000        - LEN: 0x2500000       
 Start procesing system ......
 Reading:  BEGIN: 0xb000000        - LEN: 0xc0000000      
 Backup cache disabled, we will skip it....
 Backup userdata disabled, we will skip it....
 Saved to : C:\Users\klm.KLM-PC\Documents\Android_MTK\firmware_backup\0-By CPU_MT6735_05_26_2018_00_05_51
 Wait untill phone will start charging.
 All done.

the backup have scatter file . but all file have no exetion not img or bin or no thing .what now??

Copy system and boot to another folder then rename to system.img and boot.img.
Next, follow the guide @ https://www.hovatek.com/forum/thread-20497.html and create a project. This will unpack the system.img . Check for the build.prop in the WORK/system folder
This post was last modified: 26-05-2018, 11:54 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram