Hovatek Forum MOBILE Android Itel A12 dead when flashing stock ROM was interrupted
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Itel A12 dead when flashing stock ROM was interrupted

Itel A12 dead when flashing stock ROM was interrupted

Pages (2): 1 2 Next
pjack16
pjack16
pjack16
Enthusiastic Member
14
23-05-2018, 05:19 PM
#1



Guys, i was flashing stock ROM on my Itel A12 that runs on android v 6.0, with a build number "itel A12-W507A-6.0-OP-EG-V034-20170727". I was using SPD flash tool, and whe the process started, it got stuck on downloading for ages. The i decided to unplug it, and plug it back to flash again, but it didnt respond to anything, ot even charging from the wall right now, it just gets warm when plugged on the charger, also it cant be recognised by my PC like it used to be. It's completely unresponsive. Can someone please help me to unbrick this phone?
X3non
X3non
X3non
Recognized Contributor
22,062
23-05-2018, 07:44 PM
#2
(23-05-2018, 05:19 PM)pjack16 Guys, i was flashing stock ROM on my Itel A12 that runs on android v 6.0, with a build number "itel A12-W507A-6.0-OP-EG-V034-20170727". I was using SPD flash tool, and whe the process started, it got stuck on downloading for ages. The i decided to unplug it, and plug it back to flash again, but it didnt respond to anything, ot even charging from the wall right now, it just gets warm when plugged on the charger, also it cant be recognised by my PC like it used to be. It's completely unresponsive. Can someone please help me to unbrick this phone?

take out / reinsert the battery then retry flashing
pjack16
pjack16
pjack16
Enthusiastic Member
14
24-05-2018, 04:56 PM
#3
(23-05-2018, 07:44 PM)X3non
(23-05-2018, 05:19 PM)pjack16 Guys, i was flashing stock ROM on my Itel A12 that runs on android v 6.0, with a build number "itel A12-W507A-6.0-OP-EG-V034-20170727". I was using SPD flash tool, and whe the process started, it got stuck on downloading for ages. The i decided to unplug it, and plug it back to flash again, but it didnt respond to anything, ot even charging from the wall right now, it just gets warm when plugged on the charger, also it cant be recognised by my PC like it used to be. It's completely unresponsive. Can someone please help me to unbrick this phone?

take out / reinsert the battery then retry flashing

I did. I even recharged it for like 6 hrs, but still nothing coming on. And when i connct to PC  to reflash, no response. Please, help me, Sir
X3non
X3non
X3non
Recognized Contributor
22,062
24-05-2018, 06:02 PM
#4
(24-05-2018, 04:56 PM)pjack16 I did. I even recharged it for like 6 hrs, but still nothing coming on. And when i connct to PC  to reflash, no response. Please, help me, Sir

does the PC make any sound when you connect the phone?
pjack16
pjack16
pjack16
Enthusiastic Member
14
24-05-2018, 09:02 PM
#5



(24-05-2018, 06:02 PM)X3non
(24-05-2018, 04:56 PM)pjack16 I did. I even recharged it for like 6 hrs, but still nothing coming on. And when i connct to PC  to reflash, no response. Please, help me, Sir

does the PC make any sound when you connect the phone?

No sound, no any driver installationn pop up like it used to be when i connected it while it was turned off. Nothing at all.
hovatek
hovatek
hovatek
Administrator
49,570
25-05-2018, 10:26 AM
#6
(24-05-2018, 09:02 PM)pjack16 No sound, no any driver installationn pop up like it used to be when i connected it while it was turned off. Nothing at all.

Since you've taken out and re-inserted the battery, leave it to charge a while.
Also, uninstall (using USB Deview @ https://www.hovatek.com/forum/thread-7660.html ) and re-install SPD drivers (refer to https://www.hovatek.com/forum/thread-827.html )
This post was last modified: 25-05-2018, 10:27 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
pjack16
pjack16
pjack16
Enthusiastic Member
14
25-05-2018, 04:06 PM
#7
(25-05-2018, 10:26 AM)hovatek
(24-05-2018, 09:02 PM)pjack16 No sound, no any driver installationn pop up like it used to be when i connected it while it was turned off. Nothing at all.

Since you've taken out and re-inserted the battery, leave it to charge a while.
Also, uninstall (using USB Deview  https: //www.hovatek.com/forum/thread-7660.html ) and re-install SPD drivers (refer to https: //www.hovatek.com/forum/thread-827.html )

Sir, i did as you said. Removed my spd drivers, and installed the ones you suggested, but still my phone wont gt recognised. Even when i recharge it using my PC or from the wall, it's just black screen, no even the battery icon to show if it's recharging. But the phone gets a bit warm onn its upper back.
X3non
X3non
X3non
Recognized Contributor
22,062
25-05-2018, 07:00 PM
#8
(25-05-2018, 04:06 PM)pjack16 Sir, i did as you said. Removed my spd drivers, and installed the ones you suggested, but still my phone wont gt recognised. Even when i recharge it using my PC or from the wall, it's just black screen, no even the battery icon to show if it's recharging. But the phone gets a bit warm onn its upper back.

try to get that battery boosted if you can OR try a different battery
pjack16
pjack16
pjack16
Enthusiastic Member
14
25-05-2018, 10:56 PM
#9
(25-05-2018, 07:00 PM)X3non
(25-05-2018, 04:06 PM)pjack16 Sir, i did as you said. Removed my spd drivers, and installed the ones you suggested, but still my phone wont gt recognised. Even when i recharge it using my PC or from the wall, it's just black screen, no even the battery icon to show if it's recharging. But the phone gets a bit warm onn its upper back.

try to get that battery boosted if you can OR try a different battery

Sir, i don't have any other batteries or a booster, but right now, after a while of recharging, i plugged it on my PC, and it shows a dialog box that says "usb device not recognized". Is there aything i can do to make it being at least recognised like once? And thanks in advance
hovatek
hovatek
hovatek
Administrator
49,570
26-05-2018, 11:31 AM
#10



(25-05-2018, 10:56 PM)pjack16 Sir, i don't have any other batteries or a booster, but right now, after a while of recharging, i plugged it on my PC, and it shows a dialog box that says "usb device not recognized". Is there aything i can do to make it being at least recognised like once? And thanks in advance

Still leave to charge a while. Also check device manager for what the phone gets detected as

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram