Hovatek Forum MOBILE Android [Please help] Imei fix for x572 Android 8.1 after flashing
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Imei fix for x572 Android 8.1 after flashing

[Please help] Imei fix for x572 Android 8.1 after flashing

Pages (4): Previous 1 2 3 4 Next
chewe
chewe
chewe
Enthusiastic Member
12
16-06-2018, 02:12 PM
#21



The only way it works is by NCK DONGLE OR MIRACLE BOX not cracked ones

Sent from my Infinix X571 using Tapatalk
hovatek
hovatek
hovatek
Administrator
49,570
18-06-2018, 11:10 AM
#22
(16-06-2018, 02:03 PM)Oluwaferanmi_Dara .

1. Which firmware exactly did you flash to the phone?
2. Have you tried flashing Secro & NVRAM from https://www.hovatek.com/forum/thread-20230.html
3. What error did Maui Meta give (screenshots)
4. What is your present Android version?
This post was last modified: 18-06-2018, 11:18 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Donbobs
Donbobs
Donbobs
Junior Member
21
18-06-2018, 11:27 AM
#23
I wanna ask if a memory card is needed when rooting cos I was following the tutorial on how to root camon cx air with philz recovery and on getting to the recommended backup part, it was giving me "E:can't mount backup path" so i just quit the recovery mode only to be stuck at the tecno boot screen with this text also;

"orange state
Your device has been unlocked and can't be trusted, Your device would start in 5 seconds"
But NO!!! The device no go start
Angry and if you switch the device off, it'll switch On itself...
(i can't remember my build number but i know it ends with '141')

and i even tried downloading a stock rom yesterday but network wasn't friendly(it was night sub i did Big Grin )
Abeg who could guide me to fix this ish???HELP!!!
hovatek
x3non
UPDATE: now the phone wont charge or switch ON
xerxes
xerxes
xerxes
Senior Member
8,355
18-06-2018, 04:48 PM
#24
(18-06-2018, 11:27 AM)Donbobs I wanna ask if  a memory card is needed when rooting cos I was following the tutorial on how to root camon cx air with philz recovery and on getting to the recommended backup part, it was giving me "E:can't mount backup path" so i just quit the recovery mode only to be stuck at the tecno boot screen with this text also;

"orange state
Your device has been unlocked and can't be trusted, Your device would start in 5 seconds"
But NO!!! The device no go start
Angry and if you switch the device off, it'll switch On itself...
(i can't remember my build number but i know it ends with '141')

and i even tried downloading a stock rom yesterday but network wasn't friendly(it was night sub i did Big Grin )
Abeg who could guide me to fix this ish???HELP!!!
hovatek
x3non
UPDATE: now the phone wont charge or switch ON

this is someone else's support thread, please stick to your thread @ https://www.hovatek.com/forum/thread-23181.html
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Techie Member
43
18-06-2018, 08:25 PM
#25



(18-06-2018, 11:10 AM)hovatek
(16-06-2018, 02:03 PM)Oluwaferanmi_Dara .

1. Which firmware exactly did you flash to the phone?
2. Have you tried flashing Secro & NVRAM from www.hovatek.com/forum/thread-20230.html
3. What error did Maui Meta give (screenshots)
4. What is your present Android version?

Maui meta could not detect the phone. Was talking about can't find modem  blah blah blah.. I used the firmware provided by hovatek which its variant is in this form( x572-H5312AD-N-.....) I downgraded the device to Nougat to try the maui meta method and left it at nougat ever since. 
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Techie Member
43
18-06-2018, 08:31 PM
#26
Moreover, I have not flashed the secro and nvram files.... Can i do that sp flash tool? Or how will I get it done?
Thanks.
hovatek
hovatek
hovatek
Administrator
49,570
19-06-2018, 01:32 PM
#27
(18-06-2018, 08:31 PM)Oluwaferanmi_Dara Moreover, I have not flashed the secro and nvram files.... Can i do that sp flash tool? Or how will I get it done?
Thanks.

Yes, download the NVRAM from that of another build where its listed and use your scatter file.
Open your scatter file using Notepad++ and search for nvram . set is_download from false to true
Save the scatter file then load the nvram in sp flash tool and flash

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Techie Member
43
19-06-2018, 03:08 PM
#28
(19-06-2018, 01:32 PM)hovatek
(18-06-2018, 08:31 PM)Oluwaferanmi_Dara Moreover, I have not flashed the secro and nvram files.... Can i do that sp flash tool? Or how will I get it done?
Thanks.

Yes, download the NVRAM from that of another build where its listed and use your scatter file.
Open your scatter file using Notepad++ and search for nvram . set  is_download from false to true
Save the scatter file then load the nvram in sp flash tool and flash



Please i didn't get the above procedures, can i get a video tutorial? I tried to flash the nvram like flashing a boot.img but it didn't work out. 
xerxes
xerxes
xerxes
Senior Member
8,355
19-06-2018, 05:14 PM
#29
(19-06-2018, 03:08 PM)Oluwaferanmi_Dara
(19-06-2018, 01:32 PM)hovatek
(18-06-2018, 08:31 PM)Oluwaferanmi_Dara Moreover, I have not flashed the secro and nvram files.... Can i do that sp flash tool? Or how will I get it done?
Thanks.

Yes, download the NVRAM from that of another build where its listed and use your scatter file.
Open your scatter file using Notepad++ and search for nvram . set  is_download from false to true
Save the scatter file then load the nvram in sp flash tool and flash



Please i didn't get the above procedures, can i get a video tutorial? I tried to flash the nvram like flashing a boot.img but it didn't work out. 

Download nvram @ https://www.hovatek.com/forum/thread-20230.html then use the attached scatter file to flash the nvram
This post was last modified: 20-06-2018, 10:38 AM by hovatek.
Attached Files
.zip
MT6753_Android_EMMC_scatter.zip
Size: 1.26 KB / Downloads: 7
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Oluwaferanmi_Dara
Techie Member
43
21-06-2018, 12:38 AM
#30



(19-06-2018, 05:14 PM)innagee
(19-06-2018, 03:08 PM)Oluwaferanmi_Dara
(19-06-2018, 01:32 PM)hovatek
(18-06-2018, 08:31 PM)Oluwaferanmi_Dara Moreover, I have not flashed the secro and nvram files.... Can i do that sp flash tool? Or how will I get it done?
Thanks.

Yes, download the NVRAM from that of another build where its listed and use your scatter file.
Open your scatter file using Notepad++ and search for nvram . set  is_download from false to true
Save the scatter file then load the nvram in sp flash tool and flash



Please i didn't get the above procedures, can i get a video tutorial? I tried to flash the nvram like flashing a boot.img but it didn't work out. 

Download nvram @ https://www.hovatek.com/forum/thread-20230.html then use the attached scatter file to flash the nvram
After carrying out this, i successfully lost the device's baseband and it could not detect sim anymore. So flashed it to get it working again. But no imei yet.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram