Hovatek Forum DOWNLOADS Android Firmware Tecno [Downloads] Tecno Camon X CA7 Stock ROM | Firmware and Component Files
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Downloads] Tecno Camon X CA7 Stock ROM | Firmware and Component Files

[Downloads] Tecno Camon X CA7 Stock ROM | Firmware and Component Files

Pages (5): 1 2 3 4 5 Next
hovatek
hovatek
hovatek
Administrator
49,570
17-06-2018, 11:39 AM
#1



Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Camon X CA7. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno Camon X CA7 stock rom / firmware below



Tecno Camon X CA7 (CA7-H633BCDK-O-V2-190108V228) [Factory / Signed]


Tecno Camon X CA7 (CA7-H633BCDK-O-V2-180502V170) 


Tecno Camon X CA7 (CA7-H633BCDK-O-180329V139) [Factory / Signed]



How to flash / unbrick a Tecno Camon X CA7


If you have trouble flashing then get the custom Tecno Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box, 
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Mediatek Preloader USB VCOM drivers
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord


Tecno Camon X Core Specification

  • Model: Tecno Camon X (CA7)
  • Platform: Android 8.1 Oreo
  • Processor: Octa-core MediaTek MT6763
  • GPU: Mali
  • Memory: 3GB
  • Colours: Champagne Gold, Midnight Black, City Blue
  • Body Dimension: 158.6 X 75.8 X 7.8 mm
  • SIM Type: Nano SIM
  • SIM Count: Dual SIM
  • Display: 6.0-inch, IPS LCD capacitive touchscreen, 1440 X 720 pixels
  • Rear Camera: 16MP Camera, 1080p Video@30fps
  • Rear Camera Features: Phase detection autofocus, LED flash, Geo-tagging, touch focus, face detection, HDR, panorama
  • Front Camera: 20MP camera, 1080p Video@30fps
  • Built-in Storage: 16GB / 32GB
  • Memory Card Support: Yes, up to 128GB
  • 2G GSM: Yes
  • 3G WCDMA: Yes
  • 4G LTE: Yes
  • GPRS: Yes
  • EDGE: Yes
  • 3G/WCDMA/HSPA: Yes
  • HSPA+: Yes
  • 4G LTE: Yes
  • WLAN: Wi-Fi 802.11 a/b/g/n, wi-fi Direct
  • Wi-Fi Hotspot: Yes
  • Bluetooth: Yes, v4.2 with A2DP, LE
  • USB Port: USB Type-C 2.0
  • SMS/MMS: Yes
  • Instant Messaging: Yes
  • Push Emails: Yes
  • Music Player: Yes
  • Video Player: Yes
  • FM Radio: Yes
  • Loudspeaker: Yes
  • 3.5mm Jack: Yes
  • Navigation: Yes, with A-GPS, GPS, GLONASS
  • Maps: Yes
  • Sensors & Control
  • Digital Compass: Yes
  • Accelerometer: Yes
  • Proximity Sensor: Yes
  • Light Sensor: Yes
  • Gyroscope: Yes
  • Fingerprint Scanner: Yes, (rear)
  • Face Unlock: Yes
  • Video Streaming: Yes
  • Active Noise Cancellation: Yes
  • Image Editor: Yes
  • Video Editor: Yes
  • Document Viewer: Yes
  • Document Editor: Yes
  • Battery: 3, 750 mAh non removable Li-Po battery
  • Fast Charging: Yes
This post was last modified: 21-02-2019, 12:05 PM by X3non.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Benzalf
Benzalf
Benzalf
Senior Member
136
20-06-2018, 03:30 PM
#2
Hello... when I load the Scatter file in SP Flash tool version 5.1524.00, it says the file is invalid. Any help?
juvette
juvette
juvette
Senior Member
506
20-06-2018, 03:40 PM
#3
(20-06-2018, 03:30 PM)Benzalf Hello... when I load the Scatter file in SP Flash tool version 5.1524.00, it says the file is invalid. Any help?

Use a higher version

Sent from my Infinix X510 using Hovatek Mobile
Benzalf
Benzalf
Benzalf
Senior Member
136
20-06-2018, 03:49 PM
#4
OK thanks. I will and tell the results.
Benzalf
Benzalf
Benzalf
Senior Member
136
22-06-2018, 05:53 PM
#5



Okay so SP Flash Tool version 5.1804 worked.
Thanks.
racka98
racka98
racka98
Enthusiastic Member
13
22-06-2018, 05:59 PM
#6
Help i get brom error status start cmd fail (0xc0060005) on sp flash tool v5.1744
X3non
X3non
X3non
Recognized Contributor
22,062
22-06-2018, 06:07 PM
#7
(22-06-2018, 05:59 PM)racka98 Help i get brom error status start cmd fail (0xc0060005) on sp flash tool v5.1744

use latest version of SP flash tool and also ensure not to hold any button when connecting the device for flashing
if you still have further queries then create a new thread so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
racka98
racka98
racka98
Enthusiastic Member
13
22-06-2018, 06:49 PM
#8
Ok i tried version 5.1804 and latest v5.1820. but now i see the red bar but get "error brom status cmd send da fail (0xc0060003). Any idea on this. And I didn't hold any button
Benzalf
Benzalf
Benzalf
Senior Member
136
23-06-2018, 07:32 AM
#9
Download the Download Agent (DA.bin) in a link above. Then it'll work. I suppose your phone is the Tecno CA7.
Nicanor_Charles
Nicanor_Charles
Nicanor_Charles
Junior Member
22
23-06-2018, 10:15 AM
#10



(23-06-2018, 07:32 AM)Benzalf Download the Download Agent (DA.bin) in a link above. Then it'll work. I suppose your phone is the Tecno CA7.

Facing the same problem, used latest sp flash, downloaded the DA file, even using authentication file
Still getting BROM CMD DA FAIL error. Please it has been two days and no solution yet.
Pages (5): 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram