Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] Download innjoo f2 rom

#1

Hello hovatek,
I was trying to update my innjoo f2 via ota, and my tab rebooted into recovery mode and since then the tab has refused to boot.
After following your tutorials (sp flash,mtk drivers etc) and flashing my tab there is no sign of life in my tablet anymore. Even my laptop does not recognize it anymore. I need your help guys.
Thanks.


Reply
#2
(04-06-2015, 03:55 AM)bradreus Wrote: Hello hovatek,
I was trying to update my innjoo f2 via ota, and my tab rebooted into recovery mode and since then the tab has refused to boot.
After following your tutorials (sp flash,mtk drivers etc) and flashing my tab there is no sign of life in my tablet anymore. Even my laptop does not recognize it anymore. I need your help guys.
Thanks.
do you have the stock ROM there?
Reply
#3
So sorry for late reply,
Yes I do have it. I downloaded it from a link in this site to 4shared.com
Reply
#4
(04-06-2015, 01:06 PM)bradreus Wrote: So sorry for late reply,
Yes I do have it. I downloaded it from a link in this site to 4shared.com

uninstall then re-install vcom drivers using  https://forum.hovatek.com/thread-440.html then flash using sp flash tool @  https://forum.hovatek.com/thread-159.html
Reply
#5
Thanks a lot but I have another problem, the .img files in the rom package are not descriptive enough, files like BJ106E0, CJ106E0, FJ106E0, GJ106E0 etc.

The file contains 13 .img files, 2 .db files 1 readme.txt file and 1 .sca file.

I thought the files would be in form of: preloader.img, system.img, boot.img etc

I'm trying to be very descriptive pls bear with me.

Thanks.
Reply
#6
(04-06-2015, 09:42 PM)bradreus Wrote: Thanks a lot but I have another problem, the .img files in the rom package are not descriptive enough, files like BJ106E0, CJ106E0, FJ106E0, GJ106E0 etc.

The file contains 13 .img files, 2 .db files 1 readme.txt file and 1 .sca file.

I thought the files would be in form of: preloader.img, system.img, boot.img etc

I'm trying to be very descriptive pls bear with me.

Thanks.

thats nothing to worry about. it contains all the files you need. just load the scatter file in sp flash tool and the various boxes should be ticked 
Reply
#7
(This post was last modified: 04-07-2015, 09:22 AM by bradreus. )
I did exactly that, but after loading the scatter file the location area was empty.(it was originally in .sca format and then i used a text editor to re-save it to a .txt file)

Secondly after some research I discovered that innjoo f2 chipset is an mt6572 chipset but the scatter file inside the rom loads an mt6582...I read about the chipsets and discovered that the mt6572 has a max video decode of 760p or thereabout while innjoo's website says 1080p.

PS: It gives me this error:
BROM ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

There is file not loaded yet!!
(HINT):
1. Please check if the DA path is correct.
2. Please check if all the ROM files exist.
3. Please check if the scatter file description is sync with the exist ROM files.


Thanks.
Reply
#8
(04-07-2015, 09:06 AM)bradreus Wrote: I did exactly that, but after loading the scatter file the location area was empty.(it was originally in .sca format and then i used a text editor to re-save it to a .txt file)

Secondly after some research I discovered that innjoo f2 chipset is an mt6572 chipset but the scatter file inside the rom loads an mt6582...I read about the chipsets and discovered that the mt6572 has a max video decode of 760p or thereabout while innjoo's website says 1080p.

PS: It gives me this error:
BROM ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

There is file not loaded yet!!
(HINT):
  1. Please check if the DA path is correct.
  2. Please check if all the ROM files exist.
  3. Please check if the scatter file description is sync with the exist ROM files.


Thanks.

you said you downloaded the innjoo F2 file here? which cloud service was the file hosted on?
Reply
#9
(04-07-2015, 10:26 AM)hovatek Wrote:
(04-07-2015, 09:06 AM)bradreus Wrote: I did exactly that, but after loading the scatter file the location area was empty.(it was originally in .sca format and then i used a text editor to re-save it to a .txt file)

Secondly after some research I discovered that innjoo f2 chipset is an mt6572 chipset but the scatter file inside the rom loads an mt6582...I read about the chipsets and discovered that the mt6572 has a max video decode of 760p or thereabout while innjoo's website says 1080p.

PS: It gives me this error:
BROM ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

There is file not loaded yet!!
(HINT):
  1. Please check if the DA path is correct.
  2. Please check if all the ROM files exist.
  3. Please check if the scatter file description is sync with the exist ROM files.


Thanks.

you said you downloaded the innjoo F2 file here? which cloud service was the file hosted on?

from 4shared.com here's the link to the thread:forum.hovatek.com/thread-1489.html
Reply
#10
(04-07-2015, 11:26 AM)bradreus Wrote: from 4shared.com here's the link to the thread:forum.hovatek.com/thread-1489.html

supply a gmail address for our own stock backup
Reply










Users browsing this thread:
1 Guest(s)