[Downloads] Itel A14 Stock ROM / Firmware / PAC file

[hovatek]

Below is a collection of download links to flash files, firmware, stock roms or pac files for Itel A14. If you wish to unpack or exract the contents of the pac file then follow the guide @ https://forum.hovatek.com/thread-6236.html

Download Itel A14 stock rom / firmware / pac file below

• [ Please, Register to unhide this download link]
  

How to flash / unbrick an Itel A14

The firmware above is in .pac format (after you extract from zip, rar or 7z file) so this means you can flash with Research Download or Upgrade Download tool, Infinity Chinese Miracle II SPD Box, Miracle Box or any other Chinese box or tool which supports flashing in PAC format.
Before flashing, ensure that:

1. The battery is charged to an extent and inserted into the phone
   
2. The phone is powered off / switched off
   
3. You have installed Spreadtrum SCI USB drivers
   
4. You have downloaded the firmware above and copied the .pac file into a folder (ensure to unzip if the pac file is in a zip, rar or 7z file)
   
5. You have a PC and USB cord
   

[adebayo0437]

What's the decryption key to this link?

Sent from my Moto Z2 Play using Tapatalk

[X3non]

What's the decryption key to this link?

Sent from my Moto Z2 Play using Tapatalk

Click on the link directly from the page here, don't try to copy the link out
It will load without requiring decryption key

[David337]

sorry bro im being unable to complete the rom installation, it usually stop at system error cant write UART, dunno if der is any solution to dat or wah do u advise...?

[hovatek]

sorry bro im being unable to complete the rom installation, it usually stop at system error cant write UART, dunno if der is any solution to dat or wah do u advise...?

Please, create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread

[wesideall]

if you have cm2 you can do it just by selecting the last boot on the cm2 spd module and flash it 100%