tecno wx3 lte dead after flashing
tecno wx3 lte dead after flashing
(11-07-2018, 09:32 AM)Oluwaseunsodiq Hello everyone. I made a mistake while following the guide for rooting the tecno wx3lte and i was stuck at the orange screen part. So i proceeded to flash the phone with the firmware provided on the forum and since then the phone has gone blank. The power button doesn't turn it on, it doesn't vibrate or anything but it is detected by the pc and spflashtools. The firmware I downloaded was Tecno WX3LTE B50048EFH N EGTE 171211V6 and it corresponds with my phone's main board. Please is there any way i can rectify this as soon as possible as this is my main phone. Thanks in advance.
(11-07-2018, 10:36 AM)hovatekFlashing was successful. But I'm beginning to suspect that the rom is incompatible with the phone. The phone's build number is kind of different from the rom i flashed. It was WX3LTE B50048EFH N 171211V4. I can't really remember the date part, but what I do know is that it didn't have "EGTE" as part of the it's build number. I had to flash the above rom since it was the closest one I could find that was similar to my phone's build number.(11-07-2018, 09:32 AM)Oluwaseunsodiq Hello everyone. I made a mistake while following the guide for rooting the tecno wx3lte and i was stuck at the orange screen part. So i proceeded to flash the phone with the firmware provided on the forum and since then the phone has gone blank. The power button doesn't turn it on, it doesn't vibrate or anything but it is detected by the pc and spflashtools. The firmware I downloaded was Tecno WX3LTE B50048EFH N EGTE 171211V6 and it corresponds with my phone's main board. Please is there any way i can rectify this as soon as possible as this is my main phone. Thanks in advance.
was flashing successful or it got interrupted by an error?
(11-07-2018, 11:08 AM)Oluwaseunsodiq(11-07-2018, 10:36 AM)hovatekFlashing was successful. But I'm beginning to suspect that the rom is incompatible with the phone. The phone's build number is kind of different from the rom i flashed. It was WX3LTE B50048EFH N 171211V4. I can't really remember the date part, but what I do know is that it didn't have "EGTE" as part of the it's build number. I had to flash the above rom since it was the closest one I could find that was similar to my phone's build number.(11-07-2018, 09:32 AM)Oluwaseunsodiq Hello everyone. I made a mistake while following the guide for rooting the tecno wx3lte and i was stuck at the orange screen part. So i proceeded to flash the phone with the firmware provided on the forum and since then the phone has gone blank. The power button doesn't turn it on, it doesn't vibrate or anything but it is detected by the pc and spflashtools. The firmware I downloaded was Tecno WX3LTE B50048EFH N EGTE 171211V6 and it corresponds with my phone's main board. Please is there any way i can rectify this as soon as possible as this is my main phone. Thanks in advance.
was flashing successful or it got interrupted by an error?
(11-07-2018, 03:36 PM)innageeIt's a tecno wx3 lte. And also the battery was fully charged before i formatted it. Please how can i get a compatible firmware?(11-07-2018, 11:08 AM)Oluwaseunsodiq(11-07-2018, 10:36 AM)hovatekFlashing was successful. But I'm beginning to suspect that the rom is incompatible with the phone. The phone's build number is kind of different from the rom i flashed. It was WX3LTE B50048EFH N 171211V4. I can't really remember the date part, but what I do know is that it didn't have "EGTE" as part of the it's build number. I had to flash the above rom since it was the closest one I could find that was similar to my phone's build number.(11-07-2018, 09:32 AM)Oluwaseunsodiq Hello everyone. I made a mistake while following the guide for rooting the tecno wx3lte and i was stuck at the orange screen part. So i proceeded to flash the phone with the firmware provided on the forum and since then the phone has gone blank. The power button doesn't turn it on, it doesn't vibrate or anything but it is detected by the pc and spflashtools. The firmware I downloaded was Tecno WX3LTE B50048EFH N EGTE 171211V6 and it corresponds with my phone's main board. Please is there any way i can rectify this as soon as possible as this is my main phone. Thanks in advance.
was flashing successful or it got interrupted by an error?
its either a drained battery or an incompatible firmware issue.
is you phone WX3 or WX3 LTE?
also, take out/reinsert the battery then plug the phone to charger for few hours.
(11-07-2018, 03:48 PM)Oluwaseunsodiq It's a tecno wx3 lte. And also the battery was fully charged before i formatted it. Please how can i get a compatible firmware?
(11-07-2018, 06:35 PM)X3non(11-07-2018, 03:48 PM)Oluwaseunsodiq It's a tecno wx3 lte. And also the battery was fully charged before i formatted it. Please how can i get a compatible firmware?
you still can't rule out drained battery, either you disconnect / reconnect the battery or leave the phone to charge for a while [doesn't matter if the battery was charged to full before starting the flashing process].
for compatible firmware, you'll need to look for, backup the firmware of another WX3lte phone with a different build number from the firmware you tried and try flashing it
(11-07-2018, 07:42 PM)Oluwaseunsodiq I will try charging the battery. If that doesn't work, would flashing a completely different build e.g Tecno W3 LTE (W3LTE-H356D1-M-170214V60) fix the issue or result in damage?
(12-07-2018, 09:59 AM)hovatekShould I wait and pray that you guys eventually upload the right rom for my device?(11-07-2018, 07:42 PM)Oluwaseunsodiq I will try charging the battery. If that doesn't work, would flashing a completely different build e.g Tecno W3 LTE (W3LTE-H356D1-M-170214V60) fix the issue or result in damage?
Its not advisable to flash a W3 LTE firmware to a WX3 LTE device
(12-07-2018, 10:10 PM)Oluwaseunsodiq Should I wait and pray that you guys eventually upload the right rom for my device?