Hovatek Forum MOBILE Android [Please help] Fix my tecno w4 3g model
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Fix my tecno w4 3g model

[Please help] Fix my tecno w4 3g model

Pages (7): 1 2 3 4 57 Next
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 11:20 AM
#1



Hello hovatel,i accidentally flashed
wrong custom recovery,and
trying to flash the stock rom i
downloaded from the
internet,the first rom i
downloaded failed @45%,so i
get error 4032 in sp tool,when i
connect charger it shows
charging led light but doesnt
power on at all,can i get backup
file and preloader.bin file
please,my phone is Tecno w4 3g
model,help please
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-07-2018, 12:20 PM
#2
You have not completed the flashing, and now the phone is dead...right or wrong?
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 01:06 PM
#3
Yes it didnt complete because it just got disconnected,i still have charging led light when i connect to charger,help
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 01:15 PM
#4
I just want to know which rom i should download for my tecno w4 3g model,the roms i saw are more than one,so i don't know which one i should choose and am wondering why am getting error 4032 and sp tool only detecting mtk usb port instead of preloader,my pc too doesnt have "add legacy hardware" in device manager and its windows xp,so am wondering how to install the preloader drivers help
xerxes
xerxes
xerxes
Senior Member
8,355
13-07-2018, 02:41 PM
#5



(13-07-2018, 01:15 PM)Marshall I just want to know which rom i should download for my tecno w4 3g model,the roms i saw are more than one,so i don't know which one i should choose and am wondering why am getting error 4032 and sp tool only detecting mtk usb port instead of preloader,my pc too doesnt have "add legacy hardware" in device manager and its windows xp,so am wondering how to install the preloader drivers help

You'll need to get the phone's build no. to identify which firmware is for your phone.
See https://www.hovatek.com/forum/thread-16005.html for how to get a build no. of a bricked MTK phone. Use miracle method.

if you are running windows XP follow the below procedure to install VCOM drivers.
* open device manager
* turn off the phone and connect to the PC
* when device manager refreshes, look for the newly added device and update the driver
* click "no not this time" then next
* click "install from a list or specific location (advanced)" then next
* click "dont search, i will choose the driver to install" then next
* click "have disk" then next
* click "browse" and locate the drive file then next
* click ok then next
* click on MTK preloader USB VCOM port then next
* finally click next and YES
This post was last modified: 13-07-2018, 04:02 PM by xerxes.
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 03:24 PM
#6
How can i know the phones build number when its bricked?
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 03:38 PM
#7
I can loosen the motherboard,the problem is i dont know where to check build number on the motherboard
xerxes
xerxes
xerxes
Senior Member
8,355
13-07-2018, 04:05 PM
#8
(13-07-2018, 03:38 PM)Marshall I can loosen the motherboard,the problem is i dont know where to check build number on the motherboard

you don't have to loosen it since the phone is still detecting on pc, use miracle method on the link i've sent on my previous reply.
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 04:21 PM
#9
The problem is that it connects and disconnects,i have a good usb cable and the ports are okay so i don't know its behaving that way,and its what made the flashing stop in the middle,but note that if i connect my w4 bricked phone to charger,it shows led charging light,help
Marshall
Marshall
Marshall
Senior Member
135
13-07-2018, 05:28 PM
#10



Could that tecno w4 20160427 be the right rom?because i saw tecno w4 3g model release date was April 2016,and all i got from the motherboard was "AW875",thats was it,kindly help,i don't know build number but what i know is that its tecno w4 3g model,release date April 2016,motherboard gave me "AW875" only help please,on pc it connects and disconnects
Pages (7): 1 2 3 4 57 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram