Hovatek Forum MOBILE Android [Please help] With Smartphone flashtool problem
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] With Smartphone flashtool problem

[Please help] With Smartphone flashtool problem

Marshall
Marshall
Marshall
Senior Member
135
14-07-2018, 06:19 AM
#1



There something not coming out clear for me,does it mean that getting error 4032 in sp tool stands for sp tool only detecting "mtk usb port"? Because have been getting error 4032 and sp tool only detects "mediatek usb port" instead of "mtk preloader usb port",so am just wondering if that can also trigger "enable dram failed error(4032)" apart from the wrong firmware,help
hovatek
hovatek
hovatek
Administrator
49,570
14-07-2018, 01:47 PM
#2
(14-07-2018, 06:19 AM)Marshall There something not coming out clear for me,does it mean that getting error 4032 in sp tool stands for sp tool only detecting "mtk usb port"? Because have been getting error 4032 and sp tool only detects "mediatek usb port" instead of "mtk preloader usb port",so am just wondering if that can also trigger "enable dram failed error(4032)" apart from the wrong firmware,help

Error 4032 broadly means a mismatch error but its a pretty generic error. 4032 could be triggered by:
1. Holding a volume button when connecting to PC for flashing
2. Using an incompatible firmware / preloader
3. Driver problem
4. Trying to flash partitions without a source file (i.e ticking a box with empty location)
5. Damaged emmc chip

It would help to know your phone model, present condition and how it got bricked

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Marshall
Marshall
Marshall
Senior Member
135
14-07-2018, 02:10 PM
#3
It got bricked when i tried to flash twrp,it started counting DA but stopped at 19%,i tried to flash stock rom and the phone disconnected at 45%,on second trial i got error 4032,and sp only reads "mtk usb port",thats where am stuck,when i connect my charger i only see charging led but it cant power on
X3non
X3non
X3non
Recognized Contributor
22,062
14-07-2018, 05:42 PM
#4
(14-07-2018, 02:10 PM)Marshall It got bricked when i tried to flash twrp,it started counting DA but stopped at 19%,i tried to flash stock rom and the phone disconnected at 45%,on second trial i got error 4032,and sp only reads "mtk usb port",thats where am stuck,when i connect my charger i only see charging led but it cant power on

take out / reinsert the battery of the device then retry flashing without holding any button when connecting the phone to the PC
This post was last modified: 14-07-2018, 05:43 PM by X3non.
Marshall
Marshall
Marshall
Senior Member
135
15-07-2018, 03:33 PM
#5



Have tried all you told me,i disconnected and again connected my tecno w4 inbuit battery and did not hold any button but am still getting error 4032

before the error sp tool detects "mtk usb port (com 4)",so i wonder if it can still flash in that state,because i installed the drivers correctly,what i came to notice is that it takes some before flash tool and pc detect my tecno w4,thereafter it brings error 4032,help
hovatek
hovatek
hovatek
Administrator
49,570
16-07-2018, 12:14 PM
#6
(15-07-2018, 03:33 PM)Marshall Have tried all you told me,i disconnected and again connected my tecno w4 inbuit battery and did not hold any button but am still getting error 4032

before the error sp tool detects "mtk usb port (com 4)",so i wonder if it can still flash in that state,because i installed the drivers correctly,what i came to notice is that it takes some before flash tool and pc detect my tecno w4,thereafter it brings error 4032,help

You just might be flashing the wrong firmware. Did you take note of your build number before the phone got bricked?
Also, how many different firmware have you tried?
This post was last modified: 16-07-2018, 12:15 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Marshall
Marshall
Marshall
Senior Member
135
16-07-2018, 05:09 PM
#7
Have tried two firmwares so far,from this site,sp flashtool only detects "mtk usb port com 8",does that mean the drivers are installed?
X3non
X3non
X3non
Recognized Contributor
22,062
16-07-2018, 06:22 PM
#8
(16-07-2018, 05:09 PM)Marshall Have tried two firmwares so far,from this site,sp flashtool only detects "mtk usb port com 8",does that mean the drivers are installed?

first all, you need to stop creating more threads based on your t.w4 issue. i must have gone through 3 or more threads all asking the same questions

about firmwares downloaded, you've been told to download only scatter file and preloader from the various rom builds to save your data
about detection, you've been replied at https://www.hovatek.com/forum/thread-234...#pid141083

any other queries should goto your original thread at https://www.hovatek.com/forum/thread-23462.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram