SP Flash tool error with tecno camon x

[Please help] SP Flash tool error with tecno camon x

samkol26
Enthusiastic Member

11

22-07-2018, 10:14 AM

#1

I downloaded the latest SP Flash too and I've also tried the tecno DA found here and I've also try to flash without pressing any button but non work.
I still get BROM CMD DA FAIL error or Brom cmd DA send fail.. Please help

Protechacha
Techie Member

43

22-07-2018, 11:24 AM

#2

(22-07-2018, 10:14 AM)samkol26 I downloaded the latest SP Flash too and I've also tried the tecno DA found here and I've also try to flash without pressing any button but non work.
I still get BROM CMD DA FAIL error or Brom cmd DA send fail.. Please help

First of all, what are try to achieve, flashing the rom? is the phone still working or bricked?

samkol26
Enthusiastic Member

11

22-07-2018, 12:23 PM

#3

(22-07-2018, 11:24 AM)Protechacha
(22-07-2018, 10:14 AM)samkol26 I downloaded the latest SP Flash too and I've also tried the tecno DA found here and I've also try to flash without pressing any button but non work.
I still get BROM CMD DA FAIL error or Brom cmd DA send fail.. Please help

First of all, what are try to achieve, flashing the rom? is the phone still working or bricked?

The phone is Bricked it can only get to fastboot mode, so I tried to flash the whole stock rom with SP Flash tool

This post was last modified: 22-07-2018, 12:24 PM by samkol26.

samkol26
Enthusiastic Member

11

22-07-2018, 08:17 PM

#4

Now it's showing Status Brom cmd startcmd fail 0xc60001.. please help

samkol26
Enthusiastic Member

11

23-07-2018, 12:31 PM

#5

hello please help me i think my camon x is now hard brick. the phone got bricked and then i tried to use sp flash tool but i was getting cmd da failed since yesterday. so this morning i tried to flash it again then i got another error that i have a secure boot that i should get verified recovery or disable verified boot. now i cant even get into fastboot mode. please help

hovatek
Administrator

49,585

23-07-2018, 02:00 PM

#6

(22-07-2018, 10:14 AM)samkol26 I downloaded the latest SP Flash too and I've also tried the tecno DA found here and I've also try to flash without pressing any button but non work.
I still get BROM CMD DA FAIL error or Brom cmd DA send fail.. Please help

attach a full screenshot of the error message

This post was last modified: 23-07-2018, 02:01 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Stephkells
Newbie

3

17-08-2019, 07:18 PM

#7

(23-07-2018, 02:00 PM)Stephkells I experience the same BROM CMD DA FAIL error too. Please help. Screenshot attached.

This post was last modified: 17-08-2019, 07:19 PM by Stephkells.

Attached Files

Tecno_CA8_bricked_Ayemoba.png
Size: 66.95 KB / Downloads: 27

xerxes
Senior Member

8,357

18-08-2019, 08:42 AM

#8

(17-08-2019, 07:18 PM)Stephkells
(23-07-2018, 02:00 PM)Stephkells I experience the same BROM CMD DA FAIL error too. Please help. Screenshot attached.

Disconnect/reconnect the phone’s battery then retry flashing without using .auth file.

This post was last modified: 18-08-2019, 08:45 AM by xerxes.

Stephkells
Newbie

3

19-08-2019, 12:32 PM

#9

(18-08-2019, 08:42 AM)innagee
(17-08-2019, 07:18 PM)Stephkells
(23-07-2018, 02:00 PM)Stephkells I experience the same BROM CMD DA FAIL error too. Please help. Screenshot attached.

Disconnect/reconnect the phone’s battery then retry flashing without using .auth file.

Stephkells

The battery is not removable Please help.

X3non
Recognized Contributor

22,062

19-08-2019, 03:51 PM

#10

(19-08-2019, 12:32 PM)Stephkells The battery is not removable Please help.

the battery is inbuilt, you need to loosen the back cover then disconnect / reconnect the battery clip, if you can't do this then leave the phone to charge for a long while using an AC charger or better still look for someone to help you loosen the back
then retry flashing firmware using software download tool @ https://www.hovatek.com/forum/thread-23709.html

This post was last modified: 19-08-2019, 03:59 PM by X3non.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions