Hovatek Forum MOBILE Android [Please help] Infinix Hot S Pro stuck at logo
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Infinix Hot S Pro stuck at logo

[Please help] Infinix Hot S Pro stuck at logo

Pages (3): Previous 1 2 3 Next
OmEr1112
OmEr1112
OmEr1112
Junior Member
18
31-07-2018, 09:24 AM
#11



https://www.hovatek.com/forum/thread-20132.html
Im using this stock firmware , and didnt even checked my phone's firmware number. is this firmware is right for my phone infinx hot s pro ??
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
31-07-2018, 10:20 AM
#12
I think you should delete the whole rom and extract it again and take care that you do not make any unwanted changes to the scatter file. Make just the prescribed change to the scatter file, then,

If you have saved your rom back up, use format +download option.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
31-07-2018, 10:22 AM
#13
(31-07-2018, 09:24 AM)OmEr1112 https://www.hovatek.com/forum/thread-20132.html
Im using this stock firmware , and didnt even checked my phone's firmware number. is this firmware is right for my phone infinx hot s pro ??

That rom is definitely for Hot S Pro, but may not be for your exact build number.
X3non
X3non
X3non
Recognized Contributor
22,062
31-07-2018, 02:51 PM
#14
(31-07-2018, 09:24 AM)OmEr1112 https://www.hovatek.com/forum/thread-20132.html
Im using this stock firmware , and didnt even checked my phone's firmware number. is this firmware is right for my phone infinx hot s pro ??

you can verify the build number of your device using the methods at https://www.hovatek.com/forum/thread-16005.html
do that before you try flashing [only flash the rom if it matches with your phone's build]

if it turns out that your build number matches the rom build number, then flash the rom using download only option and perform a factory reset in recovery mode after flashing
OmEr1112
OmEr1112
OmEr1112
Junior Member
18
01-08-2018, 10:14 AM
#15



(31-07-2018, 10:20 AM)EMMANUS I think you should delete the whole rom and extract it again and take care that you do not make any unwanted changes to the scatter file. Make just the prescribed change to the scatter file, then,

If you have saved your rom back up, use format +download option.

I extracted it again and the same error is happening. I dont have any backup rom for my device. and my phone is stuck at logo. now I even cant find build number. what should i do? any suggestions
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
01-08-2018, 01:56 PM
#16
(29-07-2018, 09:36 AM)EMMANUS Omer1112 if you scroll down in Sp flashtool you will see that the box for cache has no file description in it (it is empty) which translates to your ROM ,you want to flash either not having cache file or the cache file is named differently from the description in the scatter file.

Read your phone ROM with miracle before flashing to help if the flashing goes wrong.

Solution
1 Use download only option in Sp flash tool
2 If you check your firmware folder and you have cache file, then inform us.

I told you to backup in this post
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
01-08-2018, 02:01 PM
#17
(01-08-2018, 10:14 AM)OmEr1112
(31-07-2018, 10:20 AM)EMMANUS I think you should delete the whole rom and extract it again and take care that you do not make any unwanted changes to the scatter file. Make just the prescribed change to the scatter file, then,

If you have saved your rom back up, use format +download option.

I extracted it again and the same error is happening. I dont have any backup rom for my device. and my phone is stuck at logo. now I even cant find build number. what should i do? any suggestions
Do you have miracle?

If you don't have miracle and also if your flashing completed, i.e showed green ok sign, you may have to open the phone and check the board for build number.

Tell us what files are in the rom you flashed.

Answer these questions , there are more also, but let's take it little by little.
OmEr1112
OmEr1112
OmEr1112
Junior Member
18
01-08-2018, 05:22 PM
#18
(01-08-2018, 02:01 PM)EMMANUS
(01-08-2018, 10:14 AM)OmEr1112
(31-07-2018, 10:20 AM)EMMANUS I think you should delete the whole rom and extract it again and take care that you do not make any unwanted changes to the scatter file. Make just the prescribed change to the scatter file, then,

If you have saved your rom back up, use format +download option.

I extracted it again and the same error is happening. I dont have any backup rom for my device. and my phone is stuck at logo. now I even cant find build number. what should i do? any suggestions
Do you have miracle?

If you don't have miracle and also if your flashing completed, i.e showed green ok sign, you may have to open the phone and check the board for build number.

Tell us what files are in the rom you flashed.

Answer these questions , there are more also, but let's take it little by little.

boot.bin, frp.bin, lk.bin, logo.bin, nvdata.bin, nvram.bin, preloader.bin, recovery.bin, secro.bin, system.bin, tee1,bin, tee2.bin and scatter file.
Im using these files for flashing
OmEr1112
OmEr1112
OmEr1112
Junior Member
18
01-08-2018, 05:30 PM
#19
'Miracle Box 2.58 With Loader' and it doesnt detect device when it says 'waiting for device'.
i have installed drivers(see image for details), but it doesnt detect mobile
Attached Files
.png
installed_drivers.png
Size: 37.04 KB / Downloads: 5
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
01-08-2018, 09:55 PM
#20



Did the flashing complete?
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram