Hovatek Forum MOBILE Android Tecno L3 wipe/data error
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno L3 wipe/data error

Tecno L3 wipe/data error

Pages (3): Previous 1 2 3 Next
primus361
primus361
primus361
Junior Member
26
29-07-2018, 09:37 PM
#11



(29-07-2018, 08:54 PM)EMMANUS No,don't do that, try the volume and power button combination and see if any gets you to fastboot mode.



No fastboot or bootloader on the menu for both tecno recovery and chinese recovery mode on tecno l3
Hamza Shahzad
Hamza Shahzad
Hamza Shahzad
Techie Member
44
30-07-2018, 08:38 AM
#12
(29-07-2018, 07:11 PM)primus361
(29-07-2018, 03:56 PM)Hamza Shahzad
(29-07-2018, 02:04 PM)primus361
(29-07-2018, 12:11 PM)Hamza Shahzad First of all search on google about TWRP recovery for your device or Port urself with this guide... 
Thank you 
I will keep the thread updated until solution.
That's Great ! Good Luck with the solution :Smile

Finally saved time to look at your proposed solution 

Apparently, TWRP recovery from that thread has options, 5, 6 and 7 for lollipop,  marshmallow and nougat and nothing concerning android 4.0 - 4.4

Tecno l3 is old and runs on 4.1 or 4.2

So I am wondering, will it still work, should I give it a go or are there other solution you could tell me about?
here is cwm recovery for your device Tecno L3 :  https://drive.google.com/file/d/0B9srKhK...ckworkmodO


Credits : https://www.hovatek.com/forum/thread-75.html
This post was last modified: 30-07-2018, 08:39 AM by Hamza Shahzad.
X3non
X3non
X3non
Recognized Contributor
22,062
30-07-2018, 04:07 PM
#13
(29-07-2018, 09:37 PM)primus361 No fastboot or bootloader on the menu for both tecno recovery and chinese recovery mode on tecno l3

did you try doing an emmc wipe in factory mode? [vol down + power button]
if factory mode is written in chinese, then look for the option with "emmc" and select it
primus361
primus361
primus361
Junior Member
26
30-07-2018, 09:14 PM
#14
(30-07-2018, 04:07 PM)X3non
(29-07-2018, 09:37 PM)primus361 No fastboot or bootloader on the menu for both tecno recovery and chinese recovery mode on tecno l3

did you try doing an emmc wipe in factory mode? [vol down + power button]
if factory mode is written in chinese, then look for the option with "emmc" and select it


Volume buttons don't work in that mode. Tried many times
primus361
primus361
primus361
Junior Member
26
30-07-2018, 09:18 PM
#15



(30-07-2018, 08:38 AM)Hamza Shahzad
(29-07-2018, 07:11 PM)primus361
(29-07-2018, 03:56 PM)Hamza Shahzad
(29-07-2018, 02:04 PM)primus361
(29-07-2018, 12:11 PM)Hamza Shahzad First of all search on google about TWRP recovery for your device or Port urself with this guide... 
Thank you 
I will keep the thread updated until solution.
That's Great ! Good Luck with the solution :Smile

Finally saved time to look at your proposed solution 

Apparently, TWRP recovery from that thread has options, 5, 6 and 7 for lollipop,  marshmallow and nougat and nothing concerning android 4.0 - 4.4

Tecno l3 is old and runs on 4.1 or 4.2

So I am wondering, will it still work, should I give it a go or are there other solution you could tell me about?
here is cwm recovery for your device Tecno L3...



Please i don't know what to do with this
hovatek
hovatek
hovatek
Administrator
49,570
30-07-2018, 10:37 PM
#16
(29-07-2018, 08:16 PM)primus361 I have looked everywhere near me and couldn't find nobody with same type 

Do you think porting the missing files from old tecno phones, say m3 to flash with might work?

Tecno L3 is an old device but what I'm about to tell you now is based on experience from past cases.
Yes, the Tecno L3 seems to have trouble wiping emmc to fix /data error so that leaves two options:
1. Flash TWRP then wipe data & cache in recovery
2. Grab userdata & cache from a similar device (like Tecno M3 kitkat @ https://www.hovatek.com/forum/thread-19274.html ) then combine them with your L3 rom and flash (no guarantees).

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hovatek
hovatek
hovatek
Administrator
49,570
30-07-2018, 10:37 PM
#17
(29-07-2018, 08:16 PM)primus361 I have looked everywhere near me and couldn't find nobody with same type 

Do you think porting the missing files from old tecno phones, say m3 to flash with might work?

Tecno L3 is an old device but what I'm about to tell you now is based on experience from past cases.
Yes, the Tecno L3 seems to have trouble wiping emmc to fix /data error so that leaves two options:
1. Flash TWRP then wipe data & cache in recovery
2. Grab userdata & cache from a similar device (like Tecno M3 kitkat @ https://www.hovatek.com/forum/thread-19274.html ) then combine them with your L3 rom and flash.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
primus361
primus361
primus361
Junior Member
26
30-07-2018, 10:48 PM
#18
(30-07-2018, 10:37 PM)hovatek
(29-07-2018, 08:16 PM)primus361 I have looked everywhere near me and couldn't find nobody with same type 

Do you think porting the missing files from old tecno phones, say m3 to flash with might work?

Tecno L3 is an old device but what I'm about  to tell you now is based on experience from past cases.
Yes, the Tecno L3 seems to have trouble wiping emmc to fix /data error so that leaves two options:
1. Flash TWRP then wipe data & cache in recovery
2. Grab userdata & cache from a similar device (like Tecno M3 kitkat... 

How do i flash twrp on tecno l3
freshtyt
freshtyt
freshtyt
Senior Member
2,949
31-07-2018, 02:38 PM
#19
(30-07-2018, 10:48 PM)primus361 How do i flash twrp on tecno l3

scroll up to the point where @Hamza_Shahzad posted a link to CWM
you can try that CWM in place of TWRP, rename the file to recovery.img
create a new folder, copy scatter file into the folder and copy the cwm recovery.img to the same folder
flash using SPft then boot into recovery mode
primus361
primus361
primus361
Junior Member
26
01-08-2018, 08:26 PM
#20



After trying all, it still didn't work. I gave it to another technician and he did flash it(apparently, he had a full back up of tecno l3). Now the phone has not any service After flashing. It shows no service..  It was working fine until it was flashed Now. 

Please help...
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram