[Please help] Tecno L3, no service detected, imei and baseband valid
[Please help] Tecno L3, no service detected, imei and baseband valid
(03-08-2018, 07:20 PM)primus361 I had a problem flashing a tecno l3 device...
See here => https://www.hovatek.com/forum/thread-23700.html
I finally got it flashed by another technician. Now service is not detected when sim is inserted. It was working fine before flash.
IMEI and Baseband are valid, but no service!
Please help....
(04-08-2018, 09:41 AM)hovatek(03-08-2018, 07:20 PM)primus361 I had a problem flashing a tecno l3 device...
See here => https://www.hovatek.com/forum/thread-23700.html
I finally got it flashed by another technician. Now service is not detected when sim is inserted. It was working fine before flash.
IMEI and Baseband are valid, but no service!
Please help....
Change network setting to 2G only and check if you get signal
(05-08-2018, 09:30 AM)primus361 please where can i download that 'cause i can't get access to a working tecno l3.
Can i use nv_ram from an old tecno mobile, say m3?
(06-08-2018, 11:52 AM)hovatek(05-08-2018, 09:30 AM)primus361 please where can i download that 'cause i can't get access to a working tecno l3.
Can i use nv_ram from an old tecno mobile, say m3?
You can try that but NVRAM & Secro only. nothing else
The thing is we don't know what the Engineer did or flashed so we need to consider several possibilities unless you can ask the person
(06-08-2018, 09:20 PM)primus361(06-08-2018, 11:52 AM)hovatek(05-08-2018, 09:30 AM)primus361 please where can i download that 'cause i can't get access to a working tecno l3.
Can i use nv_ram from an old tecno mobile, say m3?
You can try that but NVRAM & Secro only. nothing else
The thing is we don't know what the Engineer did or flashed so we need to consider several possibilities unless you can ask the person
the baseband says: MAUI.11AMD.W12.22.SP.V15.P1.2013/03/0711.14
i think this is where the problem lies...