Hovatek Forum MOBILE Android Innjoo I2 dead
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Innjoo I2 dead

Innjoo I2 dead

Pages (3): 1 2 3 Next
ehabouf
ehabouf
ehabouf
Junior Member
17
13-08-2018, 09:03 AM
#1



My Innjoo I2 was in strange behavior (random reboot / random shutdown) because it was the end of life for the battery
So, I tried to make a factory reset – after that mobile didn’t again and no charging indicator
I got a new battery but didn’t power on either
I tried to flash stock firmware with sp flash but every time I got error 4001 no response
Windows detect the phone correctly and sp flash working correctly (tried with other phone)
How to unbreak the phone???
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-08-2018, 09:09 AM
#2
How did you perform the factory reset?

STEPS
ehabouf
ehabouf
ehabouf
Junior Member
17
13-08-2018, 09:14 AM
#3
The normal way
system->Backup&reset->factory dara reset
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-08-2018, 09:58 AM
#4
(13-08-2018, 09:14 AM)ehabouf The normal way
system->Backup&reset->factory dara reset

Thats weird, and you've tried a new battery.

What was the immediate behaviour of the phone when you hit reset?
ehabouf
ehabouf
ehabouf
Junior Member
17
13-08-2018, 10:15 AM
#5



Random restart or shutdown
May be the battery draind out during the factory reset process so the firmware was damaged
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-08-2018, 10:28 AM
#6
are you sure of the firmware you are trying to flash?
Are you able to read the phone on miracle?

If you are sure of the firmware, try these fixes for the sp flashtool error 4001

Error 4001

Message: S_FT_DA_NO_RESPONSE or Da didn't send response data to FlashTool!

Meaning: SP flash tool is having difficulty communicating with the device

Solution:
Change the USB-port
Run SP flash tool as Admin
Ensure to install the correct drivers (see https://www.hovatek.com/forum/thread-440.html )
Try another PC and USB cord
Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing
ehabouf
ehabouf
ehabouf
Junior Member
17
13-08-2018, 11:45 AM
#7
I tried all steps of SP flash above without any success
about miracle I searched for it and run it that is the results I get
Set MediaTek USB Port (COM3)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6592 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x0000000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
>>Not support Flash ID
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-08-2018, 12:07 PM
#8
Set your miracle to 4th boot auto connect and try again
ehabouf
ehabouf
ehabouf
Junior Member
17
13-08-2018, 12:14 PM
#9
the same
when connect the phone miracle switch to 8th boot mt65xx
This post was last modified: 13-08-2018, 12:24 PM by ehabouf.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-08-2018, 02:10 PM
#10



Does the phone still come on or charge?
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram