[Please help] my infinix hot 4 pro is not coming up
[Please help] my infinix hot 4 pro is not coming up
(20-08-2018, 02:22 AM)BobbyD becus after i flashed the phone and i try to on it and did not on... i flash it again with the same firmware this time it did the first download and bring ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0
so i search for the meaning of the error and google link me to guy guys... where you guys have talked about flash tool error
so pls if the info i have just give can be of help to my solution pls help
right now i have start downloading the firmware you said i should download to check the one that will work for my phone
(20-08-2018, 08:14 AM)EMMANUS By component files, he means you should download only files like the scatter file, preloader, boot , lk etc which will total about 20mb
Those files are far smaller than the whole rom which will be about 1.4gb ...why you are to download those first is that, they will save your data as, for any one you download those small files and flash and it refuses to flash to the phone, you do not have to download the whole rom,you just have to download the small files for the next one and try it also.
(20-08-2018, 11:53 AM)innagee(20-08-2018, 02:22 AM)BobbyD becus after i flashed the phone and i try to on it and did not on... i flash it again with the same firmware this time it did the first download and bring ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0
so i search for the meaning of the error and google link me to guy guys... where you guys have talked about flash tool error
so pls if the info i have just give can be of help to my solution pls help
right now i have start downloading the firmware you said i should download to check the one that will work for my phone
after flashing the first firmware that was successful have you tried disconnecting/reconnecting the phone's battery?
sometimes you'll have to disconnect/reconnect the battery after flashing else you can be able to flash another firmware or power on the phone.
(20-08-2018, 12:24 PM)BobbyD YAH I HAVE REMOVE IT COUNTLESS OF TIMES AND FLASH BUT SAME ERROR
(21-08-2018, 08:46 AM)hovatek(20-08-2018, 12:24 PM)BobbyD YAH I HAVE REMOVE IT COUNTLESS OF TIMES AND FLASH BUT SAME ERROR
Try the component files of each build number then lets know if any flashes successfully
(22-08-2018, 08:04 AM)EMMANUS Use any of the methods found here https://www.hovatek.com/forum/thread-18831.html