Hovatek Forum MOBILE Android K8-H3722ABCDE-N-171229V96 firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


K8-H3722ABCDE-N-171229V96 firmware

K8-H3722ABCDE-N-171229V96 firmware

Pages (2): 1 2 Next
muhammed0225
muhammed0225
muhammed0225
Junior Member
16
17-08-2018, 05:47 AM
#1



i need k8  firmware i downloaded  this rom  "

K8-H3722ABCDE-N-171229V96" but when i try  flashing in sp flash tool  it gives error target mismatch please help




>>MediaTek PreLoader USB VCOM Port (COM30)
>> 
>>Connecting...
>>CPU TYPE:MT6735
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x05000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x150100464536324D42033571C8F6C417
>>EMMC_PRODUCT_NAME: 0x464536324D42
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
>> 
>>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
>>Find partition success.
>> 
>>Total partition entries found: 26
>>preloader:>>addr:0x000000  -- length:0x040000
>>pgpt:>>addr:0x000000  -- length:0x080000
>>proinfo:>>addr:0x080000  -- length:0x300000
>>nvram:>>addr:0x380000  -- length:0x500000
>>protect1:>>addr:0x880000  -- length:0xA00000
>>protect2:>>addr:0x1280000  -- length:0xA00000
>>lk:>>addr:0x1C80000  -- length:0x080000
>>para:>>addr:0x1D00000  -- length:0x080000
>>boot:>>addr:0x1D80000  -- length:0x1000000
>>recovery:>>addr:0x2D80000  -- length:0x1000000
>>logo:>>addr:0x3D80000  -- length:0x800000
>>expdb:>>addr:0x4580000  -- length:0xA00000
>>seccfg:>>addr:0x4F80000  -- length:0x080000
>>oemkeystore:>>addr:0x5000000  -- length:0x200000
>>secro:>>addr:0x5200000  -- length:0x600000
>>keystore:>>addr:0x5800000  -- length:0x800000
>>tee1:>>addr:0x6000000  -- length:0x500000
>>tee2:>>addr:0x6500000  -- length:0x500000
>>frp:>>addr:0x6A00000  -- length:0x100000
>>nvdata:>>addr:0x6B00000  -- length:0x2000000
>>metadata:>>addr:0x8B00000  -- length:0x2500000
>>system:>>addr:0xB000000  -- length:0x100000000
>>cache:>>addr:0x10B000000  -- length:0x19000000
>>userdata:>>addr:0x124000000  -- length:0x27ED80000
>>flashinfo:>>addr:0xFFFF0084  -- length:0x1000000
>>sgpt:>>addr:0xFFFF0004  -- length:0x080000
>> 
>>BasicInfo :
>>Brand     : TECNO
>>ProdName  : H3722
>>ProdModel : TECNO K8
>>Device    : TECNO-K8
>>AndroidVer: 7.0
>>MTK CPU   : MT6737W
>>MTK PRJ   : K8-H3722ABCDE-N-171229V96
>>Display ID: K8-H3722ABCDE-N-171229V96
>>Board ID  : 
>>Build Date: Fri Dec 29 16:22:55 CST 2017
>> 
>>Read phone info OK.

>>Elapsed time: 00:00:54.
This post was last modified: 17-08-2018, 09:31 AM by muhammed0225.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
17-08-2018, 09:36 AM
#2
(17-08-2018, 05:47 AM)muhammed0225 i need k8  firmware i downloaded  this rom  "

K8-H3722ABCDE-N-171229V96" but when i try  flashing in sp flash tool  it gives error target mismatch please help




>>MediaTek PreLoader USB VCOM Port (COM30)
>> 
>>Connecting...
>>CPU TYPE:MT6735
>>Hardware version:CA00
>>Software version:0000
>>SecCfgVal :0x05000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x150100464536324D42033571C8F6C417
>>EMMC_PRODUCT_NAME: 0x464536324D42
>>EMMC_BOOT1_SIZE: 0x00400000
>>EMMC_BOOT2_SIZE: 0x00400000
>>EMMC_PRMB_SIZE: 0x00400000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
>> 
>>INT RAM: 128KB SDRAM    EXT RAM: 1GB DRAM
>>Find partition success.
>> 
>>Total partition entries found: 26
>>preloader:>>addr:0x000000  -- length:0x040000
>>pgpt:>>addr:0x000000  -- length:0x080000
>>proinfo:>>addr:0x080000  -- length:0x300000
>>nvram:>>addr:0x380000  -- length:0x500000
>>protect1:>>addr:0x880000  -- length:0xA00000
>>protect2:>>addr:0x1280000  -- length:0xA00000
>>lk:>>addr:0x1C80000  -- length:0x080000
>>para:>>addr:0x1D00000  -- length:0x080000
>>boot:>>addr:0x1D80000  -- length:0x1000000
>>recovery:>>addr:0x2D80000  -- length:0x1000000
>>logo:>>addr:0x3D80000  -- length:0x800000
>>expdb:>>addr:0x4580000  -- length:0xA00000
>>seccfg:>>addr:0x4F80000  -- length:0x080000
>>oemkeystore:>>addr:0x5000000  -- length:0x200000
>>secro:>>addr:0x5200000  -- length:0x600000
>>keystore:>>addr:0x5800000  -- length:0x800000
>>tee1:>>addr:0x6000000  -- length:0x500000
>>tee2:>>addr:0x6500000  -- length:0x500000
>>frp:>>addr:0x6A00000  -- length:0x100000
>>nvdata:>>addr:0x6B00000  -- length:0x2000000
>>metadata:>>addr:0x8B00000  -- length:0x2500000
>>system:>>addr:0xB000000  -- length:0x100000000
>>cache:>>addr:0x10B000000  -- length:0x19000000
>>userdata:>>addr:0x124000000  -- length:0x27ED80000
>>flashinfo:>>addr:0xFFFF0084  -- length:0x1000000
>>sgpt:>>addr:0xFFFF0004  -- length:0x080000
>> 
>>BasicInfo :
>>Brand     : TECNO
>>ProdName  : H3722
>>ProdModel : TECNO K8
>>Device    : TECNO-K8
>>AndroidVer: 7.0
>>MTK CPU   : MT6737W
>>MTK PRJ   : K8-H3722ABCDE-N-171229V96
>>Display ID: K8-H3722ABCDE-N-171229V96
>>Board ID  : 
>>Build Date: Fri Dec 29 16:22:55 CST 2017
>> 
>>Read phone info OK.

>>Elapsed time: 00:00:54.

>>MTK CPU   : MT6737W------firmware

>>CPU TYPE:MT6735--------phone

Check your build number in the phone settings menu
This post was last modified: 19-08-2018, 12:08 PM by EMMANUS.
hovatek
hovatek
hovatek
Administrator
49,570
17-08-2018, 12:27 PM
#3
(17-08-2018, 05:47 AM)muhammed0225 i need k8  firmware i downloaded  this rom  "

K8-H3722ABCDE-N-171229V96" but when i try  flashing in sp flash tool  it gives error target mismatch please help
....

Attach a full screenshot of the error message.
BTW, hope you're not holding any button when connecting.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
xerxes
xerxes
xerxes
Senior Member
8,355
17-08-2018, 12:40 PM
#4
(17-08-2018, 05:47 AM)muhammed0225 i need k8  firmware i downloaded  this rom  "
K8-H3722ABCDE-N-171229V96" but when i try  flashing in sp flash tool  it gives error target mismatch please help
...
>>Board ID  : 
>>Build Date: Fri Dec 29 16:22:55 CST 2017
>> 
>>Read phone info OK.

>>Elapsed time: 00:00:54.

What's wrong with the phone and how did the problem start?
muhammed0225
muhammed0225
muhammed0225
Junior Member
16
19-08-2018, 09:31 AM
#5



the phone does not boot it stuck on tecno logo i formated using  inferno but still same
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
19-08-2018, 12:10 PM
#6
search for the correct firmware for your phone and flash it MT6735
X3non
X3non
X3non
Recognized Contributor
22,062
19-08-2018, 10:30 PM
#7
(19-08-2018, 09:31 AM)muhammed0225 the phone does not boot it stuck on tecno logo i formated using  inferno but still same

we're still expecting a screenshot of the error message you got when trying to flash using SP flash tool
btw did you take note of the build number of the device before formatting and trying to flash?
muhammed0225
muhammed0225
muhammed0225
Junior Member
16
20-08-2018, 06:33 AM
#8
(19-08-2018, 10:30 PM)X3non
(19-08-2018, 09:31 AM)muhammed0225 the phone does not boot it stuck on tecno logo i formated using  inferno but still same

we're still expecting a screenshot of the error message you got when trying to flash using SP flash tool
btw did you take note of the build number of the device before formatting and trying to flash?

i will take screen shot. the build number is the one in the phone log . so loiking at the phone info i posted  i think  you can choose for me the correct firmware of this device in order not to get error whiling flashing.
i think the build number is in here "K8-H3722ABCDE-N-171229V96" it is 2017 -12-29  am i  correct ? my phone build is only this and not yet flashed
xerxes
xerxes
xerxes
Senior Member
8,355
20-08-2018, 11:35 AM
#9
(20-08-2018, 06:33 AM)muhammed0225
(19-08-2018, 10:30 PM)X3non
(19-08-2018, 09:31 AM)muhammed0225 the phone does not boot it stuck on tecno logo i formated using  inferno but still same

we're still expecting a screenshot of the error message you got when trying to flash using SP flash tool
btw did you take note of the build number of the device before formatting and trying to flash?

i will take screen shot. the build number is the one in the phone log . so loiking at the phone info i posted  i think  you can choose for me the correct firmware of this device in order not to get error whiling flashing.
i think the build number is in here "K8-H3722ABCDE-N-171229V96" it is 2017 -12-29  am i  correct ? my phone build is only this and not yet flashed

still expecting a screenshot of the error message you got when trying to flash using SP flash tool
since you're able to read the firmware, unpack the system.img to confirm your phone's original build no. see build.prop method @ https://www.hovatek.com/forum/thread-16005.html
This post was last modified: 20-08-2018, 11:40 AM by xerxes.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
20-08-2018, 12:09 PM
#10



1. If it is tecno K8, you need DA for it.
Once you get the correct DA file, take a backup of your phone first.



2. If the log you sent was phone info first, then firmware info at the bottom, then you have to edit the scatter file from MT6737w to MT6735 or look for the firmware for MT6735
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram