[Please help] TECNO F2LTE BRICKED
[Please help] TECNO F2LTE BRICKED
(23-08-2018, 12:13 PM)EMMANUS different versions of SP flash tool? try some higher versions
(21-08-2018, 08:41 PM)X3non(21-08-2018, 07:25 PM)vavavoom Yes. I flashed it with the DA bin found here https://www.hovatek.com/forum/thread-23243.html. However I did not include the preloader. Maybe it's because the DA is listed as testing?
from this reply of yours, it means the DA file actually works
disconnect / reconnect the battery of the device > connect to charger and try to power on
(23-08-2018, 12:57 PM)vavavoom from this reply of yours, it means the DA file actually works
disconnect / reconnect the battery of the device > connect to charger and try to power on
...
According to this page https://www.hovatek.com/forum/thread-439.html it says I need to use a custom Download Agent (DA) for the model. Maybe it is the DA that is my problem. Is it possible to get a DA that will work with this device? The one I used from this site is in testing mode. I think maybe the DA bricked the device.
(23-08-2018, 06:04 PM)X3non(23-08-2018, 12:57 PM)vavavoom from this reply of yours, it means the DA file actually works
disconnect / reconnect the battery of the device > connect to charger and try to power on
...
According to this page https://www.hovatek.com/forum/thread-439.html it says I need to use a custom Download Agent (DA) for the model. Maybe it is the DA that is my problem. Is it possible to get a DA that will work with this device? The one I used from this site is in testing mode. I think maybe the DA bricked the device.
you already used this DA file to successfully flash files onto this phone. if that's correct then the DA file has done its work.
what i want to know is have you tried to disconnected / reconnected the battery of the device?
and did you ever use the format tab to format the device or try to flash using firmware upgrade successfully?
(23-08-2018, 07:22 PM)vavavoom Yes I have disconnected and reconnected the battery several times but no change. When I flashed it I used the DA file and without the preloader, it gave me OK. I waited for some time then removed the battery and reinserted then powered on but no response. I even tried reflashing again but its always instant error. All modes including format all + download they all give this error STATUS BROM CMD Fail 0xC0060005 and according to this site it is a DA file problem. If its possible to get a dump from the same device I will be glad.
Thank you very much.
(24-08-2018, 05:17 PM)X3non(23-08-2018, 07:22 PM)vavavoom Yes I have disconnected and reconnected the battery several times but no change. When I flashed it I used the DA file and without the preloader, it gave me OK. I waited for some time then removed the battery and reinserted then powered on but no response. I even tried reflashing again but its always instant error. All modes including format all + download they all give this error STATUS BROM CMD Fail 0xC0060005 and according to this site it is a DA file problem. If its possible to get a dump from the same device I will be glad.
Thank you very much.
are you holding any buttons when you connect the phone for flashing?
can you get access to a working f2 lte phone?
(24-08-2018, 07:06 PM)X3non(24-08-2018, 05:39 PM)vavavoom I hold the vol+ and vol- buttons to connect but it shows instant error. Unfortunately I do not have access to a working F2 LTE phone.
retry flashing without holding any buttons and also ensure to load the DA file too
(24-08-2018, 07:52 PM)vavavoom(24-08-2018, 07:06 PM)X3non(24-08-2018, 05:39 PM)vavavoom I hold the vol+ and vol- buttons to connect but it shows instant error. Unfortunately I do not have access to a working F2 LTE phone.
retry flashing without holding any buttons and also ensure to load the DA file too
Error again pls see image. It seems image upload is not working anyway its not working.
Thank you very much.
(25-08-2018, 02:42 PM)innagee(24-08-2018, 07:52 PM)vavavoom(24-08-2018, 07:06 PM)X3non(24-08-2018, 05:39 PM)vavavoom I hold the vol+ and vol- buttons to connect but it shows instant error. Unfortunately I do not have access to a working F2 LTE phone.
retry flashing without holding any buttons and also ensure to load the DA file too
Error again pls see image. It seems image upload is not working anyway its not working.
Thank you very much.
it is working unless if the image size exceeds the maximum required, you can also upload on imgur.com and paste the link here.