My gionee 5001s develop calibration problem when network is poor.

[Please help] My gionee 5001s develop calibration problem when network is poor.

CajethanChuks
Enthusiastic Member

5

07-09-2018, 02:02 AM

#1

My gionee 5001s calibration malfunctions whenever the data is ON and network signal changes from H to E. The part that press itself is the ?123/ABC key when typing or the previous page key during browsing. I found out it is a network related problem when I opened the system manager and clicked on traffic monitor, then I clicked "Calibrate", what showed up reads " please manully set the correct operators brand and provinces otherwise, it will lead to key calibration failure". But I can't set it correctly because it is written in chinese. Please help me. This same phone do not support/install google apps. Help me on both if you can,Please.

juvette
Senior Member

506

07-09-2018, 10:11 AM

#2

(07-09-2018, 02:02 AM)CajethanChuks My gionee 5001s calibration malfunctions whenever the data is ON and network signal changes from H to E. The part that press itself is the ?123/ABC key when typing or the previous page key during browsing. I found out it is a network related problem when I opened the system manager and clicked on traffic monitor, then I clicked "Calibrate", what showed up reads " please manully set the correct operators brand and provinces otherwise, it will lead to key calibration failure". But I can't set it correctly because it is written in chinese. Please help me. This same phone do not support/install google apps. Help me on both if you can,Please.

Setup Gapps using https://www.hovatek.com/blog/your-androi...asy-steps/
Try changing your network settings to WCDMA only
Share a screenshot of the "please manully set the correct operators brand....." screen

Sent from my Infinix X510 using Hovatek Mobile

This post was last modified: 07-09-2018, 10:13 AM by juvette.

CajethanChuks
Enthusiastic Member

5

07-09-2018, 04:49 PM

#3

Here is the screenshot. Pls how can I change the network setting to WCDMA?

CajethanChuks
Enthusiastic Member

5

07-09-2018, 04:54 PM

#4

The screenshot

Screenshot_2018-08-31-10-50-45.png
Size: 133 KB / Downloads: 9

freshtyt
Senior Member

2,949

08-09-2018, 05:07 PM

#5

(07-09-2018, 04:49 PM)CajethanChuks Here is the screenshot. Pls how can I change the network setting to WCDMA?

settings > mobile / cellular network > preferred network type > select the data sim then select WCDMA
does the the calibration issue also happen while the phone is connected to charge?

EMMANUS
Senior Member

1,677

09-09-2018, 05:47 PM

#6

I suggest a change of the firmware, get the correct firmware for your build and flash it.

CajethanChuks
Enthusiastic Member

5

24-09-2018, 12:26 PM

#7

Pls where can I get the correct firmware for it. Any suggestion will help me.

EMMANUS
Senior Member

1,677

24-09-2018, 02:46 PM

#8

http://www.mediafire.com/file/zmfb0ze4i1...1S_OTA.zip put the zip file in memory card, then flash from recovery

freshtyt
Senior Member

2,949

24-09-2018, 04:12 PM

#9

(24-09-2018, 12:26 PM)CajethanChuks Pls where can I get the correct firmware for it. Any suggestion will help me.

ensure to dump your current firmware before flashing, you can do that using the guide at https://www.hovatek.com/forum/thread-13347.html

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions