Hovatek Forum MOBILE Android [Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery

[Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery

Pages (2): 1 2 Next
WhiteDragon
WhiteDragon
WhiteDragon
Techie Member
62
13-09-2018, 09:17 AM
#1



I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 
xerxes
xerxes
xerxes
Senior Member
8,355
13-09-2018, 10:45 AM
#2
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.
This post was last modified: 13-09-2018, 10:48 AM by xerxes.
WhiteDragon
WhiteDragon
WhiteDragon
Techie Member
62
13-09-2018, 11:20 AM
#3
(13-09-2018, 10:45 AM)innagee
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.

I think I still have the stock rom I backed up some time  ago... I will chech my system if can still get it...
I can't remember the build.... But I wrote it down somewhere.... I will look for it now. 

My charging port was working well till yesterday night before i did the factory reset
Yes, I always transfer from phone to pc and from pc to phone... I still transfer files yesterday afternoon.
I have VCOM drivers installed.

OK... I will try another USB cable. 

Thanks.
hovatek
hovatek
hovatek
Administrator
49,570
13-09-2018, 11:28 AM
#4
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

How exactly did you root? Maybe root was affected by the factory reset. Try re-rooting

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
WhiteDragon
WhiteDragon
WhiteDragon
Techie Member
62
13-09-2018, 12:11 PM
#5



(13-09-2018, 11:28 AM)hovatek
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

How exactly did you root? Maybe root was affected by the factory reset. Try re-rooting

the hone was rooted on 22nd of June @2018 by following this your thread https://www.hovatek.com/forum/thread-18027.html

the confirmation is here on my thread.... https://www.hovatek.com/forum/thread-23168.html
WhiteDragon
WhiteDragon
WhiteDragon
Techie Member
62
13-09-2018, 12:17 PM
#6
(13-09-2018, 10:45 AM)innagee
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.
xerxes
xerxes
xerxes
Senior Member
8,355
13-09-2018, 01:52 PM
#7
(13-09-2018, 12:17 PM)WhiteDragon
(13-09-2018, 10:45 AM)innagee
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.
WhiteDragon
WhiteDragon
WhiteDragon
Techie Member
62
13-09-2018, 04:41 PM
#8
(13-09-2018, 01:52 PM)innagee
(13-09-2018, 12:17 PM)WhiteDragon
(13-09-2018, 10:45 AM)innagee
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.

Anytime I connected it to system, it power itself on immediately... Even if I put it off, the phone will come up agaag.  Is there no way I can port the stock rom through the recovery mode by Zip file... Or how can I remove the PhilZ Touch Recovery? 

Also, my miracle-box is bringing forth the following error... 

Open Port Err:
***   the port be occupied 


It will later bring miracle box has stopped WORKING after clicking START.... 

NOTE: I have downloaded and installed the SPL PORT MAKING EXE FOR ALADDIN
xerxes
xerxes
xerxes
Senior Member
8,355
13-09-2018, 06:08 PM
#9
(13-09-2018, 04:41 PM)WhiteDragon
(13-09-2018, 01:52 PM)innagee
(13-09-2018, 12:17 PM)WhiteDragon
(13-09-2018, 10:45 AM)innagee
(13-09-2018, 09:17 AM)WhiteDragon I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://www.hovatek.com/forum/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://www.hovatek.com/forum/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.

Anytime I connected it to system, it power itself on immediately... Even if I put it off, the phone will come up agaag.  Is there no way I can port the stock rom through the recovery mode by Zip file... Or how can I remove the PhilZ Touch Recovery? 

Also, my miracle-box is bringing forth the following error... 

Open Port Err:
***   the port be occupied 


It will later bring miracle box has stopped WORKING after clicking START.... 

NOTE: I have downloaded and installed the SPL PORT MAKING EXE FOR ALADDIN

you can create flashable zip using stock boot.img and system.img using the guide @ https://www.hovatek.com/forum/thread-20497.html and flash via philz recovery.
hovatek
hovatek
hovatek
Administrator
49,570
14-09-2018, 09:28 AM
#10



(13-09-2018, 12:11 PM)WhiteDragon the hone was rooted on 22nd of June @2018 by following this your thread https://www.hovatek.com/forum/thread-18027.html

the confirmation is here on my thread.... https://www.hovatek.com/forum/thread-23168.html

Try reflashing superSU in Philz. If your philz detects SD card then copy the zip to sd card and flash

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram