Hovatek
  • Need instant replies? Try Private Support
  • Blog
  • Home
Login Register Ask Question Hello There, Guest!


  1. Hovatek Forum
  2. MOBILE PHONES HELP SECTION
  3. Android
Pages (2): 1 2 Next »
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5



[Please help] My Tecno L9Plus Always boot to PhilZ Touch Recovery

WhiteDragon
WhiteDragon
Techie Member
**
Posts: 47
Threads: 6
Joined: Jun 2015
Reputation: 0
#1

09-13-2018, 09:17 AM

I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

Find
Reply
X
Thanks to WhiteDragon



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


innagee
innagee
Intern
Posts: 6,260
Threads: 51
Joined: Feb 2017
Reputation: 68
#2

09-13-2018, 10:45 AM
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.
(This post was last modified: 09-13-2018, 10:48 AM by innagee. )
Find
Reply
X
Thanks to innagee



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


WhiteDragon
WhiteDragon
Techie Member
**
Posts: 47
Threads: 6
Joined: Jun 2015
Reputation: 0
#3

09-13-2018, 11:20 AM
(09-13-2018, 10:45 AM)innagee Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.

I think I still have the stock rom I backed up some time  ago... I will chech my system if can still get it...
I can't remember the build.... But I wrote it down somewhere.... I will look for it now. 

My charging port was working well till yesterday night before i did the factory reset
Yes, I always transfer from phone to pc and from pc to phone... I still transfer files yesterday afternoon.
I have VCOM drivers installed.

OK... I will try another USB cable. 

Thanks.
Find
Reply
X
Thanks to WhiteDragon



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


hovatek
hovatek
Administrator
*******
Posts: 45,547
Threads: 1,148
Joined: Oct 2013
Reputation: 395
#4

09-13-2018, 11:28 AM
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

How exactly did you root? Maybe root was affected by the factory reset. Try re-rooting

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.


Website Find
Reply
X
Thanks to hovatek



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


WhiteDragon
WhiteDragon
Techie Member
**
Posts: 47
Threads: 6
Joined: Jun 2015
Reputation: 0
#5

09-13-2018, 12:11 PM
(09-13-2018, 11:28 AM)hovatek Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

How exactly did you root? Maybe root was affected by the factory reset. Try re-rooting

the hone was rooted on 22nd of June @2018 by following this your thread https://forum.hovatek.com/thread-18027.html

the confirmation is here on my thread.... https://forum.hovatek.com/thread-23168.html
Find
Reply
X
Thanks to WhiteDragon



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


WhiteDragon
WhiteDragon
Techie Member
**
Posts: 47
Threads: 6
Joined: Jun 2015
Reputation: 0
#6

09-13-2018, 12:17 PM
(09-13-2018, 10:45 AM)innagee Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.
Find
Reply
X
Thanks to WhiteDragon



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


innagee
innagee
Intern
Posts: 6,260
Threads: 51
Joined: Feb 2017
Reputation: 68
#7

09-13-2018, 01:52 PM
(09-13-2018, 12:17 PM)WhiteDragon Wrote:  
(09-13-2018, 10:45 AM)innagee Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.
Find
Reply
X
Thanks to innagee



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


WhiteDragon
WhiteDragon
Techie Member
**
Posts: 47
Threads: 6
Joined: Jun 2015
Reputation: 0
#8

09-13-2018, 04:41 PM
(09-13-2018, 01:52 PM)innagee Wrote:  
(09-13-2018, 12:17 PM)WhiteDragon Wrote:  
(09-13-2018, 10:45 AM)innagee Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.

Anytime I connected it to system, it power itself on immediately... Even if I put it off, the phone will come up agaag.  Is there no way I can port the stock rom through the recovery mode by Zip file... Or how can I remove the PhilZ Touch Recovery? 

Also, my miracle-box is bringing forth the following error... 

Open Port Err:
***   the port be occupied 


It will later bring miracle box has stopped WORKING after clicking START.... 

NOTE: I have downloaded and installed the SPL PORT MAKING EXE FOR ALADDIN
Find
Reply
X
Thanks to WhiteDragon



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


innagee
innagee
Intern
Posts: 6,260
Threads: 51
Joined: Feb 2017
Reputation: 68
#9

09-13-2018, 06:08 PM
(09-13-2018, 04:41 PM)WhiteDragon Wrote:  
(09-13-2018, 01:52 PM)innagee Wrote:  
(09-13-2018, 12:17 PM)WhiteDragon Wrote:  
(09-13-2018, 10:45 AM)innagee Wrote:  
(09-13-2018, 09:17 AM)WhiteDragon Wrote:  I have a Techno L9PLUS,  Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem started yesterday night when I tried to do factory reset from within the settings because the phone suddenly starts showing adverts after updating my apps, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. 

My laplap didn't detect or recognise it again, the pc will show a message that the USB device is not recognised, and the phone will boot to recovery again.

What could be the problem? Or how can i solve this problem...? Thanks in advance. 

You will need to flash the Stock ROM.
What's the phone's build no.? refer to https://forum.hovatek.com/thread-16005.html

USB Not Recognized could be a charging port, usb port or drivers issue.
Were you able to transfer files from your phone to pc before this issue?
Did you install VCOM drivers? see https://forum.hovatek.com/thread-440.html
Also, try different usb cable and ports.

The phone build number is L9Plus-H8011A-N-180320V426... Also, i still have the previous stock rom i backed up, but the problem now is that: system is not detecting the phone.

while the phone is connected to pc long press the power button till the phone power off, miracle or sp flash tool will detect the phone or disconnect/reconnect the battery.

Anytime I connected it to system, it power itself on immediately... Even if I put it off, the phone will come up agaag.  Is there no way I can port the stock rom through the recovery mode by Zip file... Or how can I remove the PhilZ Touch Recovery? 

Also, my miracle-box is bringing forth the following error... 

Open Port Err:
***   the port be occupied 


It will later bring miracle box has stopped WORKING after clicking START.... 

NOTE: I have downloaded and installed the SPL PORT MAKING EXE FOR ALADDIN

you can create flashable zip using stock boot.img and system.img using the guide @ https://forum.hovatek.com/thread-20497.html and flash via philz recovery.
Find
Reply
X
Thanks to innagee



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


hovatek
hovatek
Administrator
*******
Posts: 45,547
Threads: 1,148
Joined: Oct 2013
Reputation: 395
#10

09-14-2018, 09:28 AM
(09-13-2018, 12:11 PM)WhiteDragon Wrote:  the hone was rooted on 22nd of June @2018 by following this your thread https://forum.hovatek.com/thread-18027.html

the confirmation is here on my thread.... https://forum.hovatek.com/thread-23168.html

Try reflashing superSU in Philz. If your philz detects SD card then copy the zip to sd card and flash

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.


Website Find
Reply
X
Thanks to hovatek



You're adding reputation because of this user's post, which is linked in their profile. A comment isn't needed, but if you want to leave one, please enter it below.


« Next Oldest | Next Newest »


Pages (2): 1 2 Next »






Possibly Related Threads…
Thread / Author Replies Views Last Post
I can't browse with 3g network on my Tecno l9plus, only with 2g network
MaviR28
3
192
Last Post by X3non
08-10-2019, 11:44 PM
Hello,I have tecno l9plus H8011A-N-190311V439,please help me with the flashing tool
MaviR28
1
215
Last Post by X3non
08-08-2019, 05:28 PM
Uc browser always restart when minimize
s.m
7
637
Last Post by freshtyt
02-14-2019, 11:25 AM
Infinix zero 2 X509 always rebooting
man138
5
569
Last Post by juvette
12-12-2018, 02:27 PM
Twrp and philz recovery not working on tecno c9
Moscojoor
5
799
Last Post by hovatek
10-15-2018, 12:12 PM
[FIXED/RESOLVED!] Auto TWRP Recovery Porter & Philz not working on Win7 32bit
Samuel Banda
7
958
Last Post by Samuel Banda
09-03-2018, 05:11 PM
My Tecno L9Plus got Bricked or Dead
WhiteDragon
10
2,247
Last Post by innagee
06-22-2018, 03:45 PM
how to dump Rom to flash twrp, cwm, & philz recovery in all mtk phones
Yohanan Piadoso
0
681
Last Post by Yohanan Piadoso
06-01-2018, 02:17 PM
MY INFINIX NOTE 3 X601 ALWAYS BOOT TO RECOVERY
degreatone
27
7,670
Last Post by EMMANUS
05-09-2018, 02:57 PM
Pls my infinix note 3 got wiped while the philz recovery mode is on it
Gentle_soul
13
2,390
Last Post by Gentle_soul
12-28-2017, 03:51 PM

  • View a Printable Version


Users browsing this thread: 1 Guest(s)
  1. Hovatek Forum
  2. MOBILE PHONES HELP SECTION
  3. Android

About

The Hovatek Forum is a free Tech. Support Forum. We provide solutions to all your device related problems and questions. We'll love to have you participate in discussions here whether you're a Newbie or Experienced.

         

Forum Team

Powered By MyBB. Crafted by EreeCorp.
Linear Mode
Threaded Mode