[X3non]

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Infinix X608 Hot 6 Pro. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Infinix X608 Hot 6 Pro stock rom / firmware below

Infinix Hot 6 Pro X608 (X608-QL1661ABCDEF-O-180720V19) [UFI Tool] 

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• Firehorse.mbn: [ Login / Register to download free]
  
• Patch0: [ Login / Register to download free]
  
• Rawprogram0: [ Login / Register to download free]
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

Infinix Hot 6 Pro X608 (X608-QL1661ABCDEF-O-180406V11) [Factory / Signed] 

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• Patch0: [ Login / Register to download free]
  
• Rawprogram0: [ Login / Register to download free]
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

Infinix X608 Hot 6 Pro (X608-QL1661D-O-IN-180816V18) [Factory / Signed] 

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• Firehorse.mbn: [ Login / Register to download free]
  
• Patch0: [ Login / Register to download free]
  
• Rawprogram0: [ Login / Register to download free]
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

Infinix X608 Hot 6 Pro (X608-QL1661D-O-IN-180516V13) [Factory / Signed] 

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• Patch0: [ Login / Register to download free]
  
• Rawprogram0: [ Login / Register to download free]
  
• Firehorse.mbn: [ Login / Register to download free]
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

Important Notice
If you encounter No Gapps (missing apps) after flashing this device then

1. backup the current firmware from the device using the guide @ https://forum.hovatek.com/thread-25452.html
   
2. backup EFS / QCN using the guide @ https://forum.hovatek.com/thread-27560.html then
   
3. format system partition on the phone using Miracle Box (Go to Qualcomm tab > Read / Format Flash > Tick Read Partitions > Boot into EDL and connect phone to PC > Click Port > Click Start Button > Tick Wipe Selected > Select ONLY system partition > Click Start Button ) and re-flash using HQXA
   

How to flash / unbrick a Infinix X608 Hot 6 Pro

The firmware above is in qualcomm firmware format so this means you can flash with Qualcomm flash image loader (QFIL), Miracle Box, 
Infinity Chinese Miracle II QLM Box or any other Chinese box or tool which supports flashing qualcomm phones.
Before flashing, ensure that:

1. The battery is charged to an extent and inserted into the phone
   
2. The phone is powered off / switched off
   
3. You have installed Qualcomm drivers
   
4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash and flashing tool you're using) and unzipped into a folder
   
5. You have a PC and USB cord
   

Infinix X608 Hot 6 Pro Core Specification

• Model: Infinix Hot 6 Pro
  
• Colours: Black, Blue, Gold, Red
  
• Body Material: Plastic, Metal
  
• SIM Count: Dual Sim
  
• SIM Type: Nano Sim
  
• 2G: Yes
  
• 3G: Yes
  
• 4G: Yes
  
• Platform: Android 8.0 Oreo (XOS Hummingbird 3.3)
  
• Chipset: Qualcomm Snapdragon 425 MSM8917
  
• Processor: 4x 1.4 GHz ARM Cortez-A53
  
• Cores: Quad core
  
• GPU: Qualcomm Adreno 308, 500 MHz
  
• RAM: 2 / 3GB
  
• ROM: 16 / 32GB
  
• Memory Card Support: Yes
  
• Body Dimension: 152.4 x 68.16 x 136.31mm
  
• Display: 6.0-inch, IPS LCD capacitive touchscreen, 720 x 1440 pixels
  
• Rear Camera: 13 + 2 MP with Dual Led
  
• Front Camera: 5 MP
  
• WLAN: Wi-Fi 802.11 a/b/g/n
  
• Wi-Fi Hotspot: Yes
  
• Bluetooth: Yes, 4.2 with A2DP
  
• Sensors: Proximity, Accelerometer, Light, Fingerprint
  
• Battery: 4000 mAh Li-Polymer (non-Removable)
  

[Callistus]

MEGA link not working continous scrolling unable to finalize

[innagee]

MEGA link not working continous scrolling unable to finalize

Maybe a poor internet connection. 
If you're having difficulty downloading from mega.nz then see https://forum.hovatek.com/thread-18831.html for how to download with IDM

[Godfrey111]

After flashing it the baseband corrupted i deceived to download both of them, the other one is not booting the phone while nfinix X608 Hot 6 Pro (X608-QL1661D-O-IN-180516V13) boot the phone the baseband OK but is showing me mm1 mm2 runtest only on the screen

[hovatek]

After flashing it the baseband corrupted i deceived to download both of them, the other one is not booting the phone while nfinix X608 Hot 6 Pro (X608-QL1661D-O-IN-180516V13) boot the phone the baseband OK but is showing me mm1 mm2 runtest only on the screen

Please, create a new thread so we focus on it.
see https://forum.hovatek.com/thread-514.html for how to create a thread

[[email protected]]

good evening

[hovatek]

good evening

If you need any assistance then please, create a new thread
see https://forum.hovatek.com/thread-514.html for how to create a thread

[kwamwon]

The best firmware for brick x608 is 180604V15. But the one here have no system.img.
Please Admin re-upload with full firmware
X608-QL1661ABCDEF-O-180604V15.
THANKS

[innagee]

The best firmware for brick x608 is 180604V15. But the one here have no system.img.
Please Admin re-upload with full firmware
X608-QL1661ABCDEF-O-180604V15.
THANKS

Check very well, full firmware link is there.

Sent from my M5 mini using Hovatek Mobile

[samy kandel]

THANKS