Hovatek Forum HARDWARE Boxes and Dongles [Tutorial] How to Fix Miracle Box Access Violation at Address Error
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to Fix Miracle Box Access Violation at Address Error

[Tutorial] How to Fix Miracle Box Access Violation at Address Error

xerxes
xerxes
xerxes
Senior Member
8,355
14-09-2018, 06:15 PM
#1



In this guide you will learn how to fix Access Violation at address error after launching miracle box.

What causes the Access Violation at address error?


If you have been getting the access violation at address error, it means that the software on your system tried to access a protected memory address. The memory address which is protected should not be accessed by the program you are trying to run, except for the program that is currently using it.
The access violation at address error will be followed by a series of letters and numbers as shown on the image below.

[Image: how-to-fix-access-violation-for-miracle-box-1.png]

Steps for Fixing Access Violation at Address Error


follow the below steps to fix access violation at address error


Watch the video tutorial below or @ https://youtu.be/y7U1Mwj8H1g

  1. Click Start > Right-Click on Computer > Click Properties

    [Image: how-to-fix-access-violation-for-miracle-box-2.png]

  2. By the left click on Advanced System Settings

    [Image: how-to-fix-access-violation-for-miracle-box-3.png]

  3. Under Advanced click Settings

    [Image: how-to-fix-access-violation-for-miracle-box-3.png]

  4. Click on Data Execution

    [Image: how-to-fix-access-violation-for-miracle-box-5.png]

  5. Below click Add

    [Image: how-to-fix-access-violation-for-miracle-box-6.png]

  6. Navigate to Miracle Box Directory

    [Image: how-to-fix-access-violation-for-miracle-box-7.png]

  7. Choose Miracle Box.exe and click open (if you're using the loader version then you will have to add both miracle box.exe and miracle box loader.exe)

    [Image: how-to-fix-access-violation-for-miracle-box-8.png]

  8. Click OK

    [Image: how-to-fix-access-violation-for-miracle-box-10.png]

  9. Click Ok on System Properties again then restart your pc.

    [Image: how-to-fix-access-violation-for-miracle-box-11.png]

Important Notice
  • Miracle Box ideally requires a hardware box / dongle to run so just installing the Setup (without required hardware) will not work
  • If you get the inactive start button error when using Miracle Box then rectify it using this guide
  • Miracle Box was created by the Miracle Team so credits to them

Video Transcript
Quote:Hello! In this tutorial, I'm going to show you how to fix access violation at address 005DC500 in module 'miracle_box.vmp.exe'. Read at address 7731890
in miracle box 2.54. Close Miracle Box. Go to My Computer, right-click on it, go to Properties, Click the Advanced tab, Click Settngs, Go to the Data Execution Prevention tab, Check Turn on DEP for all programs and services except those I select, Click on Add.
Locate the Miracle_box.vmp, highlight it then click Open. If you're using the loader version then select the Miracle Box loader exe too.

Once you have added both, click on Apply then OK and OK again. Now you're good to go. ALl you need is to restart your computer and re-run Miracle Box.
Thank you for watching.
This post was last modified: 07-10-2019, 08:35 PM by xerxes.
Emmylex
Emmylex
Emmylex
Newbie
1
28-04-2019, 03:22 AM
#2
Please address error tutorial did not work for me, what do I do?
X3non
X3non
X3non
Recognized Contributor
22,062
29-04-2019, 10:11 AM
#3
(28-04-2019, 03:22 AM)Emmylex Please address error tutorial did not work for me, what do I do?

download and use a different version @ https://www.hovatek.com/forum/thread-15700.html ; e.g v2.82
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram