Hovatek Forum MOBILE Android [Please help] Maze alpha X 6gb 128gb firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Maze alpha X 6gb 128gb firmware

[Please help] Maze alpha X 6gb 128gb firmware

Pages (4): 1 2 3 4 Next
kew1701
kew1701
kew1701
Junior Member
17
17-09-2018, 07:54 AM
#1



Hi,as subject say's,i need firmware for maze alpha X 6gb ram 128gb rom.I tried scatter and rom from alpha X 6gb ram 64gb rom but i get black screen.Some use on xda tried to take a backup using v2.3 wwr without system.img but i get coloured lines on screen...https://forum.xda-developers.com/maze-al...5851/page4

Please help!!
xerxes
xerxes
xerxes
Senior Member
8,355
17-09-2018, 12:11 PM
#2
(17-09-2018, 07:54 AM)kew1701 Hi,as subject say's,i need firmware for maze alpha X 6gb ram 128gb rom.I tried scatter and rom from alpha X 6gb ram 64gb rom but i get black screen.Some use on xda tried to take a backup using v2.3 wwr without system.img but i get coloured lines on screen...https://forum.xda-developers.com/maze-al...5851/page4

Please help!!

that's an lk.bin issue, refer to https://www.hovatek.com/forum/thread-1667.html
did you take note of the phone's build no.?
also, did you backup your phone's firmware before flashing it?
This post was last modified: 17-09-2018, 12:12 PM by xerxes.
kew1701
kew1701
kew1701
Junior Member
17
17-09-2018, 12:39 PM
#3
No,have bought it in that state,thought that i can put fw in it but there is no site on internet where it could be downloaded,only someone willing to do backup,preferred with wwr 2.4beta...or fix lk.bin to show image on screen...i have lk.bin from umidigi s2 pro which shows picture 99% ok? but i cant flash it because sptools showing error that preloader needs only veryfied lk.bin...
X3non
X3non
X3non
Recognized Contributor
22,062
17-09-2018, 04:50 PM
#4
(17-09-2018, 12:39 PM)kew1701 No,have bought it in that state,thought that i can put fw in it but there is no site on internet where it could be downloaded,only someone willing to do backup,preferred with wwr 2.4beta...or fix lk.bin to show image on screen...i have lk.bin from umidigi s2 pro which shows picture 99% ok? but i cant flash it because sptools showing error that preloader needs only veryfied lk.bin...

hope you used the scatter file from the wwr backup to attempt flashing the lk.bin from umidigi?
also attach a full screenshot of the error message
kew1701
kew1701
kew1701
Junior Member
17
17-09-2018, 05:21 PM
#5



(17-09-2018, 04:50 PM)X3non
(17-09-2018, 12:39 PM)kew1701 No,have bought it in that state,thought that i can put fw in it but there is no site on internet where it could be downloaded,only someone willing to do backup,preferred with wwr 2.4beta...or fix lk.bin to show image on screen...i have lk.bin from umidigi s2 pro which shows picture 99% ok? but i cant flash it because sptools showing error that preloader needs only veryfied lk.bin...

hope you used the scatter file from the wwr backup to attempt flashing the lk.bin from umidigi?
also attach a full screenshot of the error message

Yes,scatter is from backup,but backup scatter did not work in sptools,no matter i tried ,so i have put only umidigi header and partition info is from orig. backup...then it works...
Attached Files
.png
u1.png
Size: 184.2 KB / Downloads: 10
.txt
orginal x.txt
Size: 13.12 KB / Downloads: 2
.txt
umidigi header.txt
Size: 13.1 KB / Downloads: 2
X3non
X3non
X3non
Recognized Contributor
22,062
17-09-2018, 09:43 PM
#6
(17-09-2018, 05:21 PM)kew1701 Yes,scatter is from backup,but backup scatter did not work in sptools,no matter i tried ,so i have put only umidigi header and partition info is from orig. backup...then it works...

are you saying you've successfully flashed lk.bin from umidigi?
kew1701
kew1701
kew1701
Junior Member
17
17-09-2018, 10:24 PM
#7
Yes,but with complete rom from umidigi s2 pro,not with alpha x 6/128 firmware,it gives verify error then...
i have now alpha with vertical lines,and i can access fastboot(locked) which i cant unlock because i cant turn on dev options...i have twrp backup of whole rom...
kew1701
kew1701
kew1701
Junior Member
17
17-09-2018, 10:33 PM
#8
And very strang is that there is a firmware (official)of alpha x 6/64 which hardware is same as 6/128 only rom is different size...i get black screen when i flash it...unfortunately Maze went bankrupt few months ago and there is no one to ask ...
X3non
X3non
X3non
Recognized Contributor
22,062
18-09-2018, 03:28 PM
#9
(17-09-2018, 10:24 PM)kew1701 Yes,but with complete rom from umidigi s2 pro,not with alpha x 6/128 firmware,it gives verify error then...
i have now alpha with vertical lines,and i can access fastboot(locked) which i cant unlock because i cant turn on dev options...i have twrp backup of whole rom...

OK, so what problem are you facing after flashing the umidigi rom?
just for verification, the XDA user who's system-less backup you flashed, is it from the same alpha x 6/128?
kew1701
kew1701
kew1701
Junior Member
17
18-09-2018, 05:14 PM
#10



Umidigi rom wont boot any system.img,it restarts...the backup is from alpha x 6/128...
Pages (4): 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram