Cubot X18 plus bricked
Cubot X18 plus bricked
(18-09-2018, 10:37 PM)innageeGreetings! Facing the same issue, please have you been able to resolve yours, please do share if yes. thanks in advance for anticipated replies.(18-09-2018, 08:16 PM)Luis_73 Hello
I have a Cubot x18 plus smartphone. I tried to update the Rom and now the phone has died. When I try to update the Rom. This error appears: ERROR: STATUS_DA_HASH_MISMATCH (0xc0070004).
Hello
I have a Cubot x18 plus smartphone. I tried to update the Rom and now the phone has died. When I try to update the Rom. This error appears: ERROR: STATUS_DA_HASH_MISMATCH (0xc0070004)
I have tried the solution https://www.hovatek.com/forum/thread-439.html and the same error continues.
can you help me?
The phone might be stuck in preloader/flash mode, disconnecting/reconnecting the phone's battery can fix it.
Where did you get the firwmare you have tried updating with?
What's the phone's build no.?
(20-09-2018, 06:52 PM)joshtori Greetings! Facing the same issue, please have you been able to resolve yours, please do share if yes. thanks in advance for anticipated replies.
(20-09-2018, 01:06 PM)X3non(19-09-2018, 09:38 PM)Luis_73 I have disconnected the battery and the problem continues
so we can rule out phone been stuck in flash mode
try flashing using this sp flash tool version at https://mega.nz/#!gZM3SKpR!j4fyfG1QyyY1s...v2oyYvumTI
then also try the fixes listed for this error at https://www.hovatek.com/forum/thread-439.html
(21-09-2018, 08:05 AM)Luis_73 I tried flashing with the sp flash v5.1804 version.
I attach the logs
I have also tried flashing according to the thread with version v.5.1516 but it does not accept the scatter file.
Regards, and thank you very much
(20-09-2018, 01:06 PM)X3non(19-09-2018, 09:38 PM)Luis_73 I have disconnected the battery and the problem continues
so we can rule out phone been stuck in flash mode
try flashing using this sp flash tool version at https://mega.nz/#!gZM3SKpR!j4fyfG1QyyY1s...v2oyYvumTI
then also try the fixes listed for this error at https://www.hovatek.com/forum/thread-439.html
(22-09-2018, 04:17 PM)joshtori Just tried this still didn't work, same error
(21-09-2018, 01:39 PM)X3non(21-09-2018, 08:05 AM)Luis_73 I tried flashing with the sp flash v5.1804 version.
I attach the logs
I have also tried flashing according to the thread with version v.5.1516 but it does not accept the scatter file.
Regards, and thank you very much
if you get an error attach screenshots so we can see what you did
did you try the fixes for the errors you encountered on both versions listed at https://www.hovatek.com/forum/thread-439.html ?
do you still have the particular sp flash tool version you used to flash the wrong rom?
(26-09-2018, 12:13 PM)Luis_73 I think the problem is that the phone does not have a preloader.
So sp flash tool does not recognize the device.
To load the preloader I need to connect the phone in "Meta Mode".
I tried to connect the phone by USB, with the battery disconnected and vol + pulsed to flash the preloader. But still giving error.
This is the error.
ERR: status_protocol_err (0xc0010005)