Hovatek Forum MOBILE Android [Please help] TECNO CA6 MT6737T DEAD PLS HELP
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] TECNO CA6 MT6737T DEAD PLS HELP

[Please help] TECNO CA6 MT6737T DEAD PLS HELP

Pages (2): 1 2 Next
ebenco4real
ebenco4real
ebenco4real
Junior Member
15
19-09-2018, 01:12 PM
#1



TECNO CA6 MT6737T DEAD PLS HELP. Initially it was password, After formatting with cm2 it refused to boot then I decided to download firmware from hovatek now the phone is completely dead. I used firmware upgrade in sp flash tool after formatting the yellow bar refused to load and shows error. Thanks in advance
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
19-09-2018, 04:22 PM
#2
The old firmware has been formatted, the new firmware cannot be written.
Can you remember your build number?
Verify your build number (or part of it) The best way now is to open the phone and check on the board.

Download the DA files for your phone here https://www.hovatek.com/forum/thread-23243.html and try to flash the firmware you verify as correct using sp flash tool. Note that you have to try each of the DA files you downloaded from the link above
freshtyt
freshtyt
freshtyt
Senior Member
2,949
19-09-2018, 05:47 PM
#3
(19-09-2018, 01:12 PM)ebenco4real TECNO CA6 MT6737T DEAD PLS HELP. Initially it was password, After formatting with cm2 it refused to boot then I decided to download firmware from hovatek now the phone is completely dead. I used firmware upgrade in sp flash tool after formatting the yellow bar refused to load and shows error. Thanks in advance

what error do you get when you try to flash stock rom using download only?
ebenco4real
ebenco4real
ebenco4real
Junior Member
15
21-09-2018, 03:55 AM
#4
When I used firmware upgrade in sp flash tool it shows failed to get PMT info. But when I used download only it shows ERROR : S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROR CODE : 0x00.
This post was last modified: 21-09-2018, 04:14 AM by ebenco4real.
X3non
X3non
X3non
Recognized Contributor
22,062
21-09-2018, 01:27 PM
#5



(21-09-2018, 03:55 AM)ebenco4real When I used firmware upgrade in sp flash tool it shows failed to get PMT info. But when I used download only it shows ERROR : S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND (6045), MSP ERROR CODE : 0x00.

do you remember the build number of your device?
try flashing the rom you have using SP Flash Tool V5.1532.00 @ https://www.hovatek.com/forum/thread-13970.html
ebenco4real
ebenco4real
ebenco4real
Junior Member
15
22-09-2018, 05:52 AM
#6
SP Flash Tool V5.1532.00 can not load scatter file, it was showing error failed to load scatter file pls check.
X3non
X3non
X3non
Recognized Contributor
22,062
22-09-2018, 03:57 PM
#7
(22-09-2018, 05:52 AM)ebenco4real SP Flash Tool V5.1532.00  can not load scatter file, it was showing error failed to load scatter file pls check.

Ok, you didnt answer the build number question though
try the new firmware builds listed at https://www.hovatek.com/forum/thread-22800.html and give feedback
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
24-09-2018, 07:46 AM
#8
Have you been using DA file for the flashing???
ebenco4real
ebenco4real
ebenco4real
Junior Member
15
28-09-2018, 02:00 AM
#9
When I try all ca6 firmware with sp flash tool I got this error "BROM ERROR : S_AUTH_HANDLE_IS_NOT_READY (5000)

[User] This is a secure Base-band Chip! Please select the authentication file first."
ebenco4real
ebenco4real
ebenco4real
Junior Member
15
28-09-2018, 02:06 AM
#10



I also try with cm2, miracle box, eft dongle and mtk tool, all are requesting for auth file. Pls someone should come to my rescue I don't know what next to do.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram