[Please help] Dead Tecno ka7 after formatting
[Please help] Dead Tecno ka7 after formatting
(24-09-2018, 08:01 PM)wangengi Thanks hovatec for much technical support. Just formatted Tecno KA7 using nck box and it died. Tried to flash using both scatter and restore flash (bin file) but not successful. Pliz in agent need of any working solution.
(24-09-2018, 09:16 PM)innagee(24-09-2018, 08:01 PM)wangengi
Thanks hovatec for much technical support. Just formatted Tecno KA7 using nck box and it died. Tried to flash using both scatter and restore flash (bin file) but not successful. Pliz in agent need of any working solution.
does your pc still detect the phone?
did you take note of the phone's build no. before formatting it?
(25-09-2018, 08:26 AM)wangengi Yes it's detected. I didn't note phone's build in no. Before formatting.
Sent from my Infinix-X521 using Hovatek Mobile
(25-09-2018, 09:52 AM)EMMANUS Try the following in the specific order;
Hold the power button for about 2 minutes.
Try charging for sometime.
Disconnect and reconnect the battery. You have to open the phone totally for this.
If and when you open the phone , check for stickers that have writings and note what is written on it.
Tell us the build number of the file you flashed.
(25-09-2018, 04:52 PM)wangengi Sorry with scatter it refused to flash, but restore flash by nck it flashed successful. The phone is like 2 months old. Was wondering if the warrant will be void if I opened it. Pliz advice.
Sent from my Infinix-X521 using Hovatek Mobile
(25-09-2018, 06:29 PM)freshtyt(25-09-2018, 04:52 PM)wangengi
Sorry with scatter it refused to flash, but restore flash by nck it flashed successful. The phone is like 2 months old. Was wondering if the warrant will be void if I opened it. Pliz advice.
Sent from my Infinix-X521 using Hovatek Mobile
warranty would probably be void once you loosen the phone but thats the best way to check if what you really flash is compatible with your phone or not
can we see a screenshot of the content of the file and the file size of what you restored using nck?
also what error do you get when you try flashing scatter file?