Hovatek Forum MOBILE Android How to Dump Firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


How to Dump Firmware

How to Dump Firmware

5diamond
5diamond
5diamond
Techie Member
68
26-09-2018, 06:31 AM
#1



Please how to dump or extract a phone firmware as a scatter file that will work on another device perfectly
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
26-09-2018, 06:47 AM
#2
Another device here should be of 100% similarity to the one you took backup from. This should be 100% verified to prevent bricking. Some phones look alike, are the same model, but use different firmwares because they are different builds, so you have to check that the build numbers match.

Depends on the type of phone, you can take a firmware backup using miracle or wwr method.
Ourshopfix
Ourshopfix
Ourshopfix
Junior Member
32
26-09-2018, 09:07 AM
#3
You can also use "NCK tool" Box or Crack anyone.

Sent from my Infinix X572 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
26-09-2018, 12:04 PM
#4
(26-09-2018, 06:31 AM)5diamond Please how to dump or extract a phone firmware as a scatter file that will work on another device perfectly

Use Miracle method https://www.hovatek.com/forum/thread-13347.html or WWR_Tool @ https://www.hovatek.com/forum/thread-21970.html
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
07-03-2019, 12:27 AM
#5



Hello, I have been looking at the tutorial you did about "HOW TO USE Wwr + SP FLASH TOOL TO BACKUP MEDIATEK FIRMWARE", but in Wwr MTK (2.30 version) on the part where you select the "platform type (processor)", I can not find the processor type for "MT6763 V/V" TECNO CAMON X PRO(CA8S). What can I do, I want to extract this firmware, also I have looked all over the internet, I have not found a match for my device, I have attached the pictures... Please advise.
This post was last modified: 07-03-2019, 12:29 AM by BOOSTER.
Attached Files
.png
Screenshot_20190307-022251.png
Size: 227.21 KB / Downloads: 6
.png
Screenshot_20190307-022242.png
Size: 239.23 KB / Downloads: 6
X3non
X3non
X3non
Recognized Contributor
22,062
07-03-2019, 10:25 AM
#6
(07-03-2019, 12:27 AM)BOOSTER Hello, I have been looking at the tutorial you did about "HOW TO USE Wwr + SP FLASH TOOL TO BACKUP MEDIATEK FIRMWARE", but in Wwr MTK (2.30 version) on the part where you select the "platform type (processor)", I can not find the processor type for "MT6763 V/V" TECNO CAMON X PRO(CA8S). What can I do, I want to extract this firmware, also I have looked all over the internet, I have not found a match for my device, I have attached the pictures... Please advise.

you're to add your chipset to wwr, scroll to the bottom of the chipset list then select ADD >> MT6763 without the extra v/v
if you still have any other problems, then create a new thread for your device issue as this is someone else's thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
This post was last modified: 07-03-2019, 05:06 PM by X3non.
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
08-03-2019, 07:15 PM
#7
(07-03-2019, 10:25 AM)X3non
(07-03-2019, 12:27 AM)BOOSTER Hello, I have been looking at the tutorial you did about "HOW TO USE Wwr + SP FLASH TOOL TO BACKUP MEDIATEK FIRMWARE", but in Wwr MTK (2.30 version) on the part where you select the "platform type (processor)", I can not find the processor type for "MT6763 V/V" TECNO CAMON X PRO(CA8S). What can I do, I want to extract this firmware, also I have looked all over the internet, I have not found a match for my device, I have attached the pictures... Please advise.

you're to add your chipset to wwr, scroll to the bottom of the chipset list then select ADD >> MT6763 without the extra v/v
if you still have any other problems, then create a new thread for your device issue as this is someone else's thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Thanks X3non tonight am gonna do exactly as you have advised. I will post the results in a new thread and all the obstacles I will encounter...
jestone
jestone
jestone
Junior Member
38
08-03-2019, 09:39 PM
#8
(07-03-2019, 12:27 AM)BOOSTER Hello, I have been looking at the tutorial you did about "HOW TO USE Wwr + SP FLASH TOOL TO BACKUP MEDIATEK FIRMWARE", but in Wwr MTK (2.30 version) on the part where you select the "platform type (processor)", I can not find the processor type for "MT6763 V/V" TECNO CAMON X PRO(CA8S). What can I do, I want to extract this firmware, also I have looked all over the internet, I have not found a match for my device, I have attached the pictures... Please advise.

Use this modified sp flash tool http://www.mediafire.com/file/ee5kvii2xo...0.zip/file it will help you do all the job all .and in memory test in sp flash tool it will help you to get Ram test EMMC_PART_USER . and remember Tecno ca8 have secure boot . So use Tecno ca8 download agent in order to work . Good luck
BOOSTER
BOOSTER
BOOSTER
Junior Member
21
09-03-2019, 06:11 AM
#9
(08-03-2019, 07:15 PM)BOOSTER
(07-03-2019, 10:25 AM)X3non
(07-03-2019, 12:27 AM)BOOSTER Hello, I have been looking at the tutorial you did about "HOW TO USE Wwr + SP FLASH TOOL TO BACKUP MEDIATEK FIRMWARE", but in Wwr MTK (2.30 version) on the part where you select the "platform type (processor)", I can not find the processor type for "MT6763 V/V" TECNO CAMON X PRO(CA8S). What can I do, I want to extract this firmware, also I have looked all over the internet, I have not found a match for my device, I have attached the pictures... Please advise.

you're to add your chipset to wwr, scroll to the bottom of the chipset list then select ADD >> MT6763 without the extra v/v
if you still have any other problems, then create a new thread for your device issue as this is someone else's thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Thanks X3non tonight am gonna do exactly as you have advised. I will post the results in a new thread and all the obstacles I will encounter...
I have tried that one but it did not work for me. I can not load scatter file.
X3non
X3non
X3non
Recognized Contributor
22,062
09-03-2019, 11:48 AM
#10



(09-03-2019, 06:11 AM)BOOSTER I have tried that one but it did not work for me. I can not load scatter file.

stick to your thread @ https://www.hovatek.com/forum/thread-26975.html
This post was last modified: 09-03-2019, 11:54 AM by X3non.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram