infinix pro x601-H537C1-M-161017v5 need please
infinix pro x601-H537C1-M-161017v5 need please
(08-10-2018, 09:48 AM)EMMANUS Now, since you can do operations on miracle box, back up the current stuck on logo firmware, then download that file in the link I sent
(08-10-2018, 11:50 AM)EMMANUS Use this guide to format only userdata https://www.hovatek.com/forum/thread-21638.html
(08-10-2018, 09:17 PM)jeyco after i used the guide you give me i got this Storge type mismatch
scatter storage type is HW_STORAGE_EMMC
target storage type is HW_SOTORAGE_NONE and now the phone is just blank but its able to get pick up the pc in sp flash tool and miracle
(09-10-2018, 12:32 AM)X3nonDo as X3non has said.(08-10-2018, 09:17 PM)jeyco after i used the guide you give me i got this Storge type mismatch
scatter storage type is HW_STORAGE_EMMC
target storage type is HW_SOTORAGE_NONE and now the phone is just blank but its able to get pick up the pc in sp flash tool and miracle
leave the phone to charge or disconnect / reconnect the battery clip
also if miracle box is unable to dump current firmware, then use the guide at https://www.hovatek.com/forum/thread-21970.html
(09-10-2018, 08:05 AM)EMMANUSafter following the guide X3non give ii keep getting a BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL ( 5054 )(09-10-2018, 12:32 AM)X3nonDo as X3non has said.(08-10-2018, 09:17 PM)jeyco after i used the guide you give me i got this Storge type mismatch
scatter storage type is HW_STORAGE_EMMC
target storage type is HW_SOTORAGE_NONE and now the phone is just blank but its able to get pick up the pc in sp flash tool and miracle
leave the phone to charge or disconnect / reconnect the battery clip
also if miracle box is unable to dump current firmware, then use the guide at https://www.hovatek.com/forum/thread-21970.html
Now I have doubts about the either the build number you gave to me or the one I gave to you.
(10-10-2018, 02:41 AM)EMMANUS Now, the way out is to do the format operation using scatter file generated from the phone itself to be sure.(phone is unable to read unless i press volume up + power and i think thats whats cause this error )
Try using nck mtk tool to backup lets see
(10-10-2018, 07:40 AM)jeycoBut the phone still comes on, right?(10-10-2018, 02:41 AM)EMMANUS Now, the way out is to do the format operation using scatter file generated from the phone itself to be sure.(phone is unable to read unless i press volume up + power and i think thats whats cause this error )
Try using nck mtk tool to backup lets see
BBCHIP MT6753_S00
Connect error[5054]: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;
using nck mtk tool