(04-13-2015, 09:44 AM)donsuly Wrote: pls how do we tweak IMEI make una help me abbeg ooooooooooooooooooooooooooooooooo
REQUIREMENTS For changing/Fixing the IMEI number on your MTK android:::
1. A Rooted Android (MTK 65**)
2. A valid IMEI number
3. The MobileUncle MTK Tools from PlayStore
Note that when you use IMEI number of your old unused mobile phone, be sure to never insert a SIM of same network again.
i.e >> If you use a Glo sim on a Blackberry (or any other phone), after you copied and use the Blackerry's IMEI into your Android, your Glo will work fine on your Android. But be sure not to insert that same Glo SIM into the Blackberry again, If you do and switch it on, the sim will not register to the network. After getting the above ready,
follow the Procedures below:
1.Dial *#06#, write down your Default IMEI, or Simply Back it up on ur SDcard with mobile uncle tools
.2. Run the MobileUncle tools App
3. Go to >> Engineer Mode >> Engineer Mode (MTK)
4. Swipe left to connectivity and Scroll down to CDS Information
5. CLICK >>Radio Information, You'll see something like:
In that select Phone 1 if you wish to change the imei of sim 1
2.When you select
Phone1 or Phone2 -
you'll find AT+
Just after that AT+
type any letter and delete that letter,
You will see this ‘AT+EGMR=1,7, “” delete one of those hyphens then input your tweaked IMEI...
Then click "Send Command"
Once you get the msg "AT COMMAND IS MSENT"
That's it.. Your done..
.TO CHANGE IMEI FOR SIM2
Send Command SEND ...
FOR THOSE USING INFINIX HOT X507
if you get errors saying "this command is not enabled in user build"
Make sure you leave a Space between ‘AT and +"
Now Click SEND AT command, You'll get response
"AT command is mSent"
Now restart your phone..
That's all... check the IMEI and See if it worked by dialing *#06#....
Hope this was helpful.....
Sent from my Infinix X507 using Hovatek mobile