[Please help] Hard bricked meizu m6 phone
[Please help] Hard bricked meizu m6 phone
(11-10-2018, 07:44 PM)cos Hi there
I did it! I hard bricked my meizu m6 2/16 gb. I rooted then flashed wrong twrp img via Flasify.
The phone did not start only spinning bootloop with the message "red state your device...may not work properly"
I tried to flash a rom .rar with sp flash tool but it brinks brom errors cmd fail and many others.
Finaly I tried to format the hole disk but it allowed without bootloader only. Now I have a device which refuses
to write anything. I disconnect the battery but I did not have any connected sound of the win pc.
So I have not any other way to try. I wish to help me
(11-10-2018, 10:55 PM)innagee(11-10-2018, 07:44 PM)cos Hi there
I did it! I hard bricked my meizu m6 2/16 gb. I rooted then flashed wrong twrp img via Flasify.
The phone did not start only spinning bootloop with the message "red state your device...may not work properly"
I tried to flash a rom .rar with sp flash tool but it brinks brom errors cmd fail and many others.
Finaly I tried to format the hole disk but it allowed without bootloader only. Now I have a device which refuses
to write anything. I disconnect the battery but I did not have any connected sound of the win pc.
So I have not any other way to try. I wish to help me
You shouldn't have formatted the phone's bootloader.
Did you take note of the phone's build no ?
Have you tried connecting the phone while holding the vol down, up or both vol key?
Sent from my M5mini using Hovatek Mobile
(12-10-2018, 10:46 AM)cos Thank you for the reply
I did not take a not a note, (IMME or other, no backup) if I understand what you mean.
I tried all the keys combination.
The phone seems dead (no pc sound, impossible for sp tool to flash) when I unplug the battery.
However the motherboard is alive when I plug it again.
Please note the known sound of pc exist but ADB not recognize the device.
I can't find out the way to delete the whole disk
I think I've stuck.
I'm ready throw it to the recycle bin
(12-10-2018, 04:34 PM)X3non(12-10-2018, 10:46 AM)cos Thank you for the reply
I did not take a not a note, (IMME or other, no backup) if I understand what you mean.
I tried all the keys combination.
The phone seems dead (no pc sound, impossible for sp tool to flash) when I unplug the battery.
However the motherboard is alive when I plug it again.
Please note the known sound of pc exist but ADB not recognize the device.
I can't find out the way to delete the whole disk
I think I've stuck.
I'm ready throw it to the recycle bin
ADB won't detect the device if you didn't turn on USB debugging, fastboot should be able to detect if you've installed drivers and are using latest adb and fastboot
i hope the firmware you're trying to flash is for your model
attach a screenshot of the contents of the firmware you downloaded
also attach a full screenshot of the error you get when you try flashing the firmware
(12-10-2018, 11:55 PM)cos I can't attach any file. Am I doing something wrong?
(13-10-2018, 12:45 PM)hovatekHere are the files(12-10-2018, 11:55 PM)cos I can't attach any file. Am I doing something wrong?
Upload the image anywhere online and post the link here.
Your phone will of course go dead since you've formatted / wiped the OS from it.
You'll need to flash a compatible firmware to revive it.
At this point, its down to trial and error of as many meizu m6 firmware as you can find.