Hovatek Forum MOBILE Android [Please help] Hard bricked meizu m6 phone
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Hard bricked meizu m6 phone

[Please help] Hard bricked meizu m6 phone

Pages (5): 1 2 3 4 5 Next
cos
cos
cos
Junior Member
23
11-10-2018, 07:44 PM
#1



Hi there
I did it! I hard bricked my meizu m6 2/16 gb. I rooted then flashed wrong twrp img via Flasify.
The phone did not start only spinning bootloop with the message "red state your device...may not work properly"
I tried to flash a rom .rar with sp flash tool but it brinks brom errors cmd fail and many others.
Finaly I tried to format the hole disk but it allowed without bootloader only. Now I have a device which refuses
to write anything. I disconnect the battery but I did not have any connected sound of the win pc.
So I have not any other way to try. I wish to help me
This post was last modified: 11-10-2018, 10:01 PM by cos.
xerxes
xerxes
xerxes
Senior Member
8,355
11-10-2018, 10:55 PM
#2
(11-10-2018, 07:44 PM)cos Hi there
I did it! I hard bricked my meizu m6 2/16 gb. I rooted then flashed wrong twrp img via Flasify.
The phone did not start only spinning bootloop with the message "red state your device...may not work properly"
I tried to flash a rom .rar with sp flash tool but it brinks brom errors cmd fail and many others.
Finaly I tried to format the hole disk but it allowed without bootloader only. Now I have a device which refuses
to write anything. I disconnect the battery but I did not have any connected sound of the win pc.
So I have not any other way to try. I wish to help me

You shouldn't have formatted the phone's bootloader.
Did you take note of the phone's build no ?
Have you tried connecting the phone while holding the vol down, up or both vol key?

Sent from my M5mini using Hovatek Mobile
cos
cos
cos
Junior Member
23
12-10-2018, 10:46 AM
#3
(11-10-2018, 10:55 PM)innagee
(11-10-2018, 07:44 PM)cos Hi there
I did it! I hard bricked my meizu m6 2/16 gb. I rooted then flashed wrong twrp img via Flasify.
The phone did not start only spinning bootloop with the message "red state your device...may not work properly"
I tried to flash a rom .rar with sp flash tool but it brinks brom errors cmd fail and many others.
Finaly I tried to format the hole disk but it allowed without bootloader only. Now I have a device which refuses
to write anything. I disconnect the battery but I did not have any connected sound of the win pc.
So I have not any other way to try. I wish to help me

You shouldn't have formatted the phone's bootloader.
Did you take note of the phone's build no ?
Have you tried connecting the phone while holding the vol down, up or both vol key?

Sent from my M5mini using Hovatek Mobile

Thank you for the reply
I did not take a not a note, (IMME or other, no backup) if I understand what you mean.
I tried all the keys combination.
The phone seems dead (no pc sound, impossible for sp tool to flash) when I unplug the battery.
However the motherboard is alive when I plug it again.
Please note the known sound of pc exist but ADB not recognize the device.
I can't find out the way to delete the whole disk
I think I've stuck.
I'm ready throw it to the recycle bin
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
12-10-2018, 04:28 PM
#4
Show us what you got,

the file, the tool with the error
X3non
X3non
X3non
Recognized Contributor
22,062
12-10-2018, 04:34 PM
#5



(12-10-2018, 10:46 AM)cos Thank you for the reply
I did not take a not a note, (IMME or other, no backup) if I understand what you mean.
I tried all the keys combination.
The phone seems dead (no pc sound, impossible for sp tool to flash) when I unplug the battery.
However the motherboard is alive when I plug it again.
Please note the known sound of pc exist but ADB not recognize the device.
I can't find out the way to delete the whole disk
I think I've stuck.
I'm ready throw it to the recycle bin

ADB won't detect the device if you didn't turn on USB debugging, fastboot should be able to detect if you've installed drivers and are using latest adb and fastboot
i hope the firmware you're trying to flash is for your model
attach a screenshot of the contents of the firmware you downloaded
also attach a full screenshot of the error you get when you try flashing the firmware
cos
cos
cos
Junior Member
23
12-10-2018, 11:19 PM
#6
(12-10-2018, 04:28 PM)EMMANUS Show us what you got,

the file, the tool with the error

I sent you all my files but I can't see them attached
This post was last modified: 12-10-2018, 11:44 PM by cos.
cos
cos
cos
Junior Member
23
12-10-2018, 11:55 PM
#7
(12-10-2018, 04:34 PM)X3non
(12-10-2018, 10:46 AM)cos Thank you for the reply
I did not take a not a note, (IMME or other, no backup) if I understand what you mean.
I tried all the keys combination.
The phone seems dead (no pc sound, impossible for sp tool to flash) when I unplug the battery.
However the motherboard is alive when I plug it again.
Please note the known sound of pc exist but ADB not recognize the device.
I can't find out the way to delete the whole disk
I think I've stuck.
I'm ready throw it to the recycle bin

ADB won't detect the device if you didn't turn on USB debugging, fastboot should be able to detect if you've installed drivers and are using latest adb and fastboot
i hope the firmware you're trying to flash is for your model
attach a screenshot of the contents of the firmware you downloaded
also attach a full screenshot of the error you get when you try flashing the firmware

I can't attach any file. Am I doing something wrong?
hovatek
hovatek
hovatek
Administrator
49,570
13-10-2018, 12:45 PM
#8
(12-10-2018, 11:55 PM)cos I can't attach any file. Am I doing something wrong?

Upload the image anywhere online and post the link here.
Your phone will of course go dead since you've formatted / wiped the OS from it.
You'll need to flash a compatible firmware to revive it.
At this point, its down to trial and error of as many meizu m6 firmware as you can find.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
cos
cos
cos
Junior Member
23
14-10-2018, 02:33 PM
#9
(13-10-2018, 12:45 PM)hovatek
(12-10-2018, 11:55 PM)cos I can't attach any file. Am I doing something wrong?

Upload the image anywhere online and post the link here.
Your phone will of course go dead since you've formatted / wiped the OS from it.
You'll need to flash a compatible firmware to revive it.
At this point, its down to trial and error of as many meizu m6 firmware as you can find.
Here are the files
Thank you in advance

https://mega.nz/#!3SplSaxD!vtrO9KJOj8p7A...8OpdqB8sm8
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
15-10-2018, 09:30 AM
#10



Read this carefully and understand

From your screen shots , I found

There is a rom that contains a DA file, we will use that DA file to try all the firmwares you have and I think you have 3 different firmwares

For every firmware, try "Download Only" option

The best firmware to try in my opinion will be the one named as 20171118162341xxxxxxxxxxxxxxxxxxrebuilt_stable6.2.0.1g


Retry what you did in the 7th screenshot you sent but now, use the DA from the same folder as the firmware

If it doesn't work, you are gonna have to modify the scatter file to load the verified images instead. (hope you can do that)

Get back with the results.
This post was last modified: 15-10-2018, 11:24 AM by hovatek.
Pages (5): 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram