Hovatek Forum MOBILE Android [Please help] Hard bricked meizu m6 phone
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Hard bricked meizu m6 phone

[Please help] Hard bricked meizu m6 phone

Pages (5): Previous 1 2 3 4 5 Next
X3non
X3non
X3non
Recognized Contributor
22,062
17-10-2018, 07:49 PM
#21



(17-10-2018, 12:42 PM)cos Thank you! I tried but no luck. Please take a look at files below. The files 1,2,3 are from flashing with your file. 
The next 4,5,6 with DA_PL.bin. The most hopeful event is both of the files are indicate chip info.
...

try unticking everything except preloader then flash only preloader
also there's no point trying to format the device again using spft
cos
cos
cos
Junior Member
23
18-10-2018, 11:59 AM
#22
(17-10-2018, 07:49 PM)X3non
(17-10-2018, 12:42 PM)cos Thank you! I tried but no luck. Please take a look at files below. The files 1,2,3 are from flashing with your file. 
The next 4,5,6 with DA_PL.bin. The most hopeful event is both of the files are indicate chip info.
...

try unticking everything except preloader then flash only preloader
also there's no point trying to format the device again using spft

thanks but no luck
X3non
X3non
X3non
Recognized Contributor
22,062
18-10-2018, 04:41 PM
#23
(18-10-2018, 11:59 AM)cos thanks but no luck

can you get access to a working meizu M6 phone and a hardware box /dongle e.g miracle box , cm2mtk?
cos
cos
cos
Junior Member
23
18-10-2018, 04:57 PM
#24
(18-10-2018, 04:41 PM)X3non
(18-10-2018, 11:59 AM)cos thanks but no luck

can you get access to a working meizu M6 phone and a hardware box /dongle e.g miracle box , cm2mtk?

.
This post was last modified: 18-10-2018, 05:47 PM by cos.
cos
cos
cos
Junior Member
23
18-10-2018, 05:28 PM
#25



(18-10-2018, 04:57 PM)cos
(18-10-2018, 04:41 PM)X3non
(18-10-2018, 11:59 AM)cos thanks but no luck

can you get access to a working meizu M6 phone and a hardware box /dongle e.g miracle box , cm2mtk?

unfortunately not m6, mb2.27a, cm2 only
This post was last modified: 18-10-2018, 05:33 PM by cos.
hovatek
hovatek
hovatek
Administrator
49,570
19-10-2018, 07:42 AM
#26
(17-10-2018, 12:42 PM)cos Thank you! I tried but no luck. Please take a look at files below. The files 1,2,3 are from flashing with your file. 
The next 4,5,6 with DA_PL.bin. The most hopeful event is both of the files are indicate chip info. 
I haven't any other I can do.

If I get you right, you were able to format using DA_PL.bin . Did you use an Auth file for this operation and which?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
cos
cos
cos
Junior Member
23
19-10-2018, 11:52 AM
#27
(19-10-2018, 07:42 AM)hovatek
(17-10-2018, 12:42 PM)cos Thank you! I tried but no luck. Please take a look at files below. The files 1,2,3 are from flashing with your file. 
The next 4,5,6 with DA_PL.bin. The most hopeful event is both of the files are indicate chip info. 
I haven't any other I can do.

If I get you right, you were able to format using DA_PL.bin . Did you use an Auth file for this operation and which?

I think no matter if I use Da Helio, PL and auth file. the result is the same
btw, I have two auth files, I found the first in Write efuse V7.4.0 folder,
the second I have downloaded from XDA forum

https://mega.nz/#!HKJjlKxJ!n3FNf2RKJoz6x...rm1YJOigqg
This post was last modified: 19-10-2018, 05:37 PM by cos.
hovatek
hovatek
hovatek
Administrator
49,570
20-10-2018, 12:59 PM
#28
(19-10-2018, 11:52 AM)cos I think no matter if I use Da Helio, PL and auth file. the result is the same
btw, I have two auth files, I found the first in Write efuse V7.4.0 folder,
the second I have downloaded from XDA forum

https://mega.nz/#!HKJjlKxJ!n3FNf2RKJoz6x...rm1YJOigqg

The problem seems to be a DA and (or) Auth thing.
Try
1. Unticking preloader and flashing the reset
2. Flashing preloader alone

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
cos
cos
cos
Junior Member
23
20-10-2018, 08:01 PM
#29
(20-10-2018, 12:59 PM)hovatek
(19-10-2018, 11:52 AM)cos I think no matter if I use Da Helio, PL and auth file. the result is the same
btw, I have two auth files, I found the first in Write efuse V7.4.0 folder,
the second I have downloaded from XDA forum

https://mega.nz/#!HKJjlKxJ!n3FNf2RKJoz6x...rm1YJOigqg

The problem seems to be a DA and (or) Auth thing.
Try
1. Unticking preloader and flashing the reset
2. Flashing preloader alone

I tried several times. Nothing at all. This phone is a nightmare. No hope?
hovatek
hovatek
hovatek
Administrator
49,570
21-10-2018, 08:25 PM
#30



(20-10-2018, 08:01 PM)cos I tried several times. Nothing at all. This phone is a nightmare. No hope?

The problem might be the Auth file.
Need to find a compatible one or we try with a working phone of the same model (to backup).
The real problem began when you formatted
This post was last modified: 21-10-2018, 08:41 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (5): Previous 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram