Hovatek Forum MOBILE Android [Please help] Bricked Acer Liquid Z6 t09
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Bricked Acer Liquid Z6 t09

[Please help] Bricked Acer Liquid Z6 t09

Pages (5): Previous 1 2 3 4 5 Next
nickless
nickless
nickless
Junior Member
22
15-10-2018, 06:17 PM
#21



(15-10-2018, 05:46 PM)X3non
(15-10-2018, 03:19 PM)nickless Unfortunately no.

dump firmware from your phone using the guide at https://www.hovatek.com/forum/thread-21970.html
lets know when you're done with that, you'll get a working scatter file for your phone from the dump
In Step 3 the Chipset is MT6737M?
I can not use the app to verify chipset

Ok done with that, attached scatter file.
This post was last modified: 15-10-2018, 09:00 PM by nickless.
Attached Files
.txt
MT6735_Android_scatter.txt
Size: 9.56 KB / Downloads: 11
.txt
MT6737M_Android_scatter.txt
Size: 1.01 KB / Downloads: 11
X3non
X3non
X3non
Recognized Contributor
22,062
15-10-2018, 11:35 PM
#22
(15-10-2018, 06:17 PM)nickless ...
Ok done with that, attached scatter file.

now try this
the update.zip files you downloaded must contain boot.img and system.*.dat
extract system.new.dat using the guide at https://www.hovatek.com/forum/thread-15855.html
you'll repack the extracted system folder using the guide at https://www.hovatek.com/forum/thread-20497.html [don't add anything tweaks, just repack]
but in place of system.img you'll use the extracted system folder and in step 2, copy boot.img and system folder to 'work' folder
if you did everything properly, you should get system.img

flash the system.img and boot.img using SP flash tool and the scatter file you created for your device earlier on
lets know the outcome
This post was last modified: 15-10-2018, 11:38 PM by X3non.
nickless
nickless
nickless
Junior Member
22
16-10-2018, 12:31 AM
#23
This is not working.
i choose "1 Start Creating Project" and it says "WHAT YOU WANT TO DO IN THIS PROJECT [1=SAVE 2=REMOVE DEFAULT=BACK]:"
if i chose option 1 or 2 it removes content of 'work' folder
If i don't start new project it error with "THERE IS NO PROJECT IN WORK FOLDER CREATE PROJECT FIRST"
if i continue starting new project the programm get stuck after "FROM WHERE YOU WANT TO GET ROM [DEFAULT=PLACE_FOLDER 0=BACK 1=FROM_DEVICE]:"
I used the zip from acer website in 'place' folder to create raw img in assayyed. replaced boot.img and system.img in previous dump and flashed all of them using sp flash tool.
Phone still does not boot.
This post was last modified: 16-10-2018, 02:52 AM by nickless.
hovatek
hovatek
hovatek
Administrator
49,570
16-10-2018, 11:30 AM
#24
(16-10-2018, 12:31 AM)nickless This is not working.
i choose "1 Start Creating Project" and it says "WHAT YOU WANT TO DO IN THIS PROJECT [1=SAVE 2=REMOVE DEFAULT=BACK]:"
if i chose option 1 or 2 it removes content of 'work' folder
If i don't start new project it error with "THERE IS NO PROJECT IN WORK FOLDER CREATE PROJECT FIRST"
if i continue starting new project the programm get stuck after "FROM WHERE YOU WANT TO GET ROM [DEFAULT=PLACE_FOLDER 0=BACK 1=FROM_DEVICE]:"
I used the zip from acer website in 'place' folder to create raw img in assayyed. replaced boot.img and system.img in previous dump and flashed all of them using sp flash tool.
Phone still does not boot.

Here's the plan.
1. Make a full dump of your phone's rom so we have a scatter file, system.img and boot.img
2. Extract the system.new.dat using https://www.hovatek.com/forum/thread-15855.html
3. Using the system.img and boot.img from your backup, create a project using https://www.hovatek.com/forum/thread-20497.html (i.e stop at step 16)
4. In the WORK folder will be a system folder. Delete its contents and replace with the contents of the system folder extracted from the system.new.dat
5. Repack the rom (RAW) in assayyed so you'll have boot.img and system.img
6. Grab the system.img from the assayyed rom and boot.img from your Acer stock rom and flash using sp flash tool. If the acer rom contains other files like lk.bin, flash also
This post was last modified: 16-10-2018, 11:33 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
nickless
nickless
nickless
Junior Member
22
16-10-2018, 02:21 PM
#25



(16-10-2018, 11:30 AM)hovatek Here's the plan.
1. Make a full dump of your phone's rom so we have a scatter file, system.img and boot.img
2. Extract the system.new.dat using https://www.hovatek.com/forum/thread-15855.html
3. Using the system.img and boot.img from your backup, create a project using https://www.hovatek.com/forum/thread-20497.html (i.e stop at step 16)
4. In the WORK folder will be a system folder. Delete its contents and replace with the contents of the system folder extracted from the system.new.dat
5. Repack the rom (RAW) in assayyed so you'll have boot.img and system.img
6. Grab the system.img from the assayyed rom and boot.img from your Acer stock rom and flash using sp flash tool. If the acer rom contains other files like lk.bin, flash also
1. done - no error
2. done - no error
3. done - no error
4. done - no error
5. error
Code:

++++++++++++++++DEVICE INFO++++++++++++++++++++
--DEVICE MODEL: Acer -- T09
--ARCHITECTURE: armeabi-v7a
--ANDROID VERSION: 6.0 -- 23
+++++++++++++++++ROM INFO++++++++++++++++++++++
--ROOT STATUS: [NO] [4]
--BUSYBOX STATUS: [NO] [5]
--SQLITE STATUS: [NO] [13]
--ROM INIT.D SUPPORT STATUS: [NO] [9]
--DEKNOXED STATUS: [YES] [10]
--DEBLOATED STATUS: [NO] [11]
--ZIPALIGN STATUS: [YES] [3]
--DEODEX STATUS: [NO] [2]
--SYSTEM ADB MOUNT-REMOUNT STATUS: [NO] [14]
--CUSTOM BOOTANIMATION STATUS: [YES] [20]
--SU.D SUPPORT STATUS: [NO] [31]
++++++++++++++++INSTALLER INFO+++++++++++++++++
--INSTALLER MODEL: [STANDALONE INSTALLING]
--INSTALLER WIPE DATA: [NO] [15]
--INSTALLER EXT4 SCRIPTS: [NO] [19]
+++++++++++++++PROJECT STATUS++++++++++++++++++
****************** STABLE *********************
+++++++++++++++++++++++++++++++++++++++++++++++
  1  START CREATING PROJECT
  2  DEODEXING PROJECT
  3  ZIPALIGN PROJECT
  4  INSTALLING THE ROOT
  5  INSTALLING BUSYBOX
  6  BUILDING NEW INSTALLER
  7  BUILD ROM FOR FLASHING
  8  ADD BUILD.PROP TWEAKS
  9  ADD INIT.D SUPPORT
10  DEKNOXING THE ROM
11  DEBLOATING THE ROM
12  KERNEL/RECOVERY MENU
13  INSTALL SQLITE SCRIPT
14  INSTALL SYSRO-SYSRW
15  INSTALLER WIPE DATA
16  SAVE/REMOVE PROJECT
17  OPENNING WORK FOLDER
18  FORCE BUILD FLASH ROM
19  ADDING EXT4-TUNE2FS
20  ADD CUSTOM BOOTANIMATION
21  ADDING EFS BACKEUP
22  INIT.D TWEAKS MENU
23  RESTORE/DELETE SAVED PROJECTS
25  CHANGE BUILD NUMBER STRING
26  OPENNING BUILD.PROP
27  OPENNING UPDATER-SCRIPT
29  PUSH READY ROMS TO PHONE
30  IMAGES EDITOR MENU
31  ADD SU.D SUPPORT
32  ADD ZIP TO ROM INSTALLER
+++++++++++++++++++++++++++++++++++++++++++++++
TYPE WHAT YOU WANT OR [APKTOOL] OR [0=EXIT]:7

THE KITCHEN CAN BUILD IN THIS METHODS:
DAT: FASTEST METHOD DURING INSTALLING [system.new.dat]
RAW: GOOD METHOD, FLASHING RAW [system.img] TO YOUR DEVICE
ZIP: BUILD SAME ANY ZIP ROM [NORMAL MODE]
TYPE BUILD METHOD THAT YOU WANT [1=DAT 2=ZIP 3=RAW DEFAULT=BACK]:3

THIS METHOD OF BUILDING WILL CREATE RAW EXT4 SYSTEM PARTITION
AND FLASH IT TO YOUR DEVICE SYSTEM BLOCK PATH
THIS MEANS NO SYMLINKING DURING THE INSTALL AND NO PERMISSIONS
TO SET, FAST AND CLEAN INSTALL
AND THIS NEED TO DETECT DEVICE BLOCK PATH
WE CAN DETECT SYSTEM PATH AUTOMATICALLY FROM [recovery.img] OR [boot.img]
FOR THIS DEVICE OR YOU CAN WRITE IT MANUALLY
WHAT YOUR OPTION [DEFAULT=FROM_KERNEL 1=FROM_DEVICE 2=MANUALLY 0=CANCEL]:DEFAULT
DETECTING SYSTEM PATH FROM [boot.img]
DETECTED SYSTEM PATH: [/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system]
PREPARING FOLDERS FOR [raw] BUILD
TYPE ROM NAME [SHOW DURING INSTALLATION]:test
PREPARING [updater-script]
CREATING SYMLINKS
DETECTING SIZE OF SYSTEM FOLDER
WE HAVE DETECTED SYSTEM SIZE [~0,3M]
IT IS HIGHLY RECOMMENDED THAT YOU DON'T CHANGE IT
BUT IF YOU A DEVELOPER AND IF YOU KNOW WHAT YOU ARE DOING
YOU CAN EXPAND IT AS YOUR DEVICE SYSTEM SIZE
WHAT YOUR CHOICE [DEFAULT=NO 0=CANCEL 1=YES 2=TRY_AUTO]:DEFAULT
DO YOU WANT TO ZIPALIGN APKS BEFOR BUILD [DEFAULT=YES 0=NO]:0
CREATING SPARSE [system.img] FROM SYSTEM FOLDER
ERROR IN CREATING [system.img] CAN'T CONTINUE
This post was last modified: 16-10-2018, 02:24 PM by nickless.
X3non
X3non
X3non
Recognized Contributor
22,062
16-10-2018, 05:36 PM
#26
(16-10-2018, 02:21 PM)nickless 1. done - no error
2. done - no error
3. done - no error
4. done - no error
5. error
Code:

...
CREATING SPARSE [system.img] FROM SYSTEM FOLDER
ERROR IN CREATING [system.img] CAN'T CONTINUE

try launching assayed as admin then retry
nickless
nickless
nickless
Junior Member
22
16-10-2018, 07:35 PM
#27
(16-10-2018, 05:36 PM)X3non try launching assayed as admin then retry
This is already as admin. It does not fail when chosing Build ZIP, only error at DAT and RAW. Is there a log file somewhere or debug mode so i can get more information about error?
X3non
X3non
X3non
Recognized Contributor
22,062
16-10-2018, 10:12 PM
#28
(16-10-2018, 07:35 PM)nickless This is already as admin. It does not fail when chosing Build ZIP, only error at DAT and RAW. Is there a log file somewhere or debug mode so i can get more information about error?

doubt the tool creates log file, try this modification instead

1. Make a full dump of your phone's rom so we have a scatter file, system.img and boot.img
2. Extract the system.new.dat using https://www.hovatek.com/forum/thread-15855.html 
3. Copy the extracted system folder and boot.img from your backup into the WORK folder, then launch assayed. This will automatically create a project
4. Repack the rom (RAW) in assayed so you'll have boot.img and system.img
5. Grab the system.img from the assayyed rom and boot.img from your Acer stock rom and flash using sp flash tool. If the acer rom contains other files like lk.bin, flash also

take note from step 3, its different from what you tried last time
nickless
nickless
nickless
Junior Member
22
17-10-2018, 12:03 AM
#29
(16-10-2018, 10:12 PM)X3non
(16-10-2018, 07:35 PM)nickless This is already as admin. It does not fail when chosing Build ZIP, only error at DAT and RAW. Is there a log file somewhere or debug mode so i can get more information about error?

doubt the tool creates log file, try this modification instead

1. Make a full dump of your phone's rom so we have a scatter file, system.img and boot.img
2. Extract the system.new.dat using https://www.hovatek.com/forum/thread-15855.html 
3. Copy the extracted system folder and boot.img from your backup into the WORK folder, then launch assayed. This will automatically create a project
4. Repack the rom (RAW) in assayed so you'll have boot.img and system.img
5. Grab the system.img from the assayyed rom and boot.img from your Acer stock rom and flash using sp flash tool. If the acer rom contains other files like lk.bin, flash also

take note from step 3, its different from what you tried last time
Same error at step 4
Found the solution:
Code:

WE HAVE DETECTED SYSTEM SIZE [~0,3M]
IT IS HIGHLY RECOMMENDED THAT YOU DON'T CHANGE IT
BUT IF YOU A DEVELOPER AND IF YOU KNOW WHAT YOU ARE DOING
YOU CAN EXPAND IT AS YOUR DEVICE SYSTEM SIZE
WHAT YOUR CHOICE [DEFAULT=NO 0=CANCEL 1=YES 2=TRY_AUTO]:
Do not use Default. I had to modify value for partition size. I used size from system.img dumped before.

Flashed all with SP Flash tool:
- Acer logo screen gone, i only get black screen on boot
- fastboot oem unlock no longer working
- i can mount /system in recovery mode now
What next?
X3non
X3non
X3non
Recognized Contributor
22,062
17-10-2018, 04:14 PM
#30



(17-10-2018, 12:03 AM)nickless Same error at step 4
Found the solution:
...
Flashed all with SP Flash tool:
- Acer logo screen gone, i only get black screen on boot
- fastboot oem unlock no longer working
- i can mount /system in recovery mode now
What next?

can you list all the particular files you flash?
Pages (5): Previous 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram