[Please help] Bricked Acer Liquid Z6 t09
[Please help] Bricked Acer Liquid Z6 t09
(17-10-2018, 06:51 PM)nickless I did full dump and copy/replace the new files, then flash everything. Attached screenshot from flash tool with everything in.
(17-10-2018, 07:51 PM)X3nonNew files:(17-10-2018, 06:51 PM)nickless I did full dump and copy/replace the new files, then flash everything. Attached screenshot from flash tool with everything in.
let me rephrase
which new files did you flash? i.e the ones you replaced
if lk.bin was amongst the new files, then try flashing only lk.bin from your dump
Error: found 210 lost files
E: Failed to open /bootloader2 (No such file or directory)
copy 1k2 done
copy boot done
copy recovery done
copy logo done
copy tee1 done
copy tee2 done
boot NORMAL check Pass
boot ADVANCE check Pass
System check FAIL!
[I]: No boot messages
(17-10-2018, 08:15 PM)nickless Many files from /system/priv-app/, /system/usr/, /system/tts/, /system/vendor/, and /system/res/
Do you want me to type full list?
(18-10-2018, 03:19 PM)X3non no need for thatDid that with all of them
try the same procedure i.e converting system.new.dat to system.img for the remaining two update.zip roms you downloaded
then try flashing boot and system.img using sp flash tool
(18-10-2018, 06:32 PM)nickless Did that with all of them
Acer.T09.AV0M0.1.035.00.EMEA.GEN1 - This was the one i used first
Acer.T09.AV0M0.1.017.00.EMEA.BGC - This one make phone reboot every 10 sec. and recovery mode not working
1.037.00.EMEA.GEN1 - Same as first one, boot up to black screen and then stuck.
Things are getting weird.
So i have the sticker inside phone it says
Liquid Z6
Model No. T09
Part No. HM HWAEE 001
SNID: 717007914635
When i got to acer website and search for liquid z6 i get this
https://www.acer.com/ac/en/US/content/su...t/6995?b=1
when is search for SNID on Acer website i get this
https://www.acer.com/ac/en/US/content/su...7007914635
can i use that download from there too?
It says model T10 but that number lead me to that page.
(19-10-2018, 11:44 AM)Raopiplus Your best bet is to start anew. You have Viacom drivers installed and sp tool recognises the device in switched off position , I suppose. Load sp tool with stock firmware da/dl, untick preloaded drivers loading , click download button. Only after download is fully complete, connect the switched off phone with battery removed(volume down pressed if battery is not removable). Connect USB cable to computer , then add battery. Flashing should start and complete giving green circle. Remove cable let the flashed software boot for aleast 10-15 min. It should erase everything boot as factory fresh phone.Where to get stock firmware for Acer Liquid Z6 T09?
(19-10-2018, 11:19 AM)nickless I did that. I used boot.img and system.img from assayed, but no luck so far.