Hovatek Forum MOBILE Android Flashing System.img Problem
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Flashing System.img Problem

Flashing System.img Problem

Pages (2): 1 2 Next
Slent
Slent
Slent
Enthusiastic Member
10
15-10-2018, 02:38 PM
#1



Hello guys! Need some of your help.
So here's what happen, I got bootloop keeps on rebooting at formatting; phone suddenly shutdown in the middle of hard format over recovery, so I tried to fix it with sp flash tools, at first I tried to use the 'format whole flash' (believing it was equivalent to hard format of recovery) and the phone is not opening anymore after this. Then I tried to flash the stock rom but I got some error; 'error 3149' at sp flash tools version 3 and 'error 4008' with version 5 that stops at always exact 30-31% (the part of system.img flashing).

I can successfully flash the other files except system.img (Android)
I can format the phone over this tool (sp flash) without any problem
Flashing the system.img alone also stops at 12-31% (my main problem rn)
I have also tried to redownload the stock rom guessing it might be just corrupted but no luck.
Support from IMS mentions about the huge file size of system.img.
The phone is just charging over pc port.
Recovery is accessible
Fastboot is accessible

Flashing system.img over fastboot stuck at "erasing 'system'..."

My phone is  Lenovo S5000-H
Stock rom: S5000_A442_102_081_140609_WW_SMS
And the sp flash tools I used are version 5.1724 and 3.1344.0.212
Drivers I installed: LenovoUsbDriver_v1.1.33MTK_USB_All_v1.0.815 seconds ADB Installer v1.4.3

Just wanted to know if did i missed some steps or something, I'm not really used to this kinds of stuffs.

I'll also attach the log, maybe it can help, thank you.
This post was last modified: 16-10-2018, 11:24 AM by Slent.
Attached Files
.txt
BROM_DLL.log.txt
Size: 43.94 KB / Downloads: 5
.jpg
formatting.jpg
Size: 113.94 KB / Downloads: 1
.jpg
flashing only system.jpg
Size: 244.15 KB / Downloads: 2
.jpg
flashing without system.jpg
Size: 264.65 KB / Downloads: 1
.jpg
flashing all.jpg
Size: 239.69 KB / Downloads: 1
xerxes
xerxes
xerxes
Senior Member
8,355
15-10-2018, 04:41 PM
#2
(15-10-2018, 02:38 PM)Slent Hello guys! Need some of your help.
So here's what happen, I got bootloop keeps on rebooting at formatting; phone suddenly shutdown in the middle of hard format over recovery, so I tried to fix it with sp flash tools, at first I tried to use the 'format whole flash' (believing it was equivalent to hard format of recovery) and the phone is not opening anymore after this. Then I tried to flash the stock rom but I got some error; 'error 3149' at sp flash tools version 3 and 'error 4008' with version 5 that stops at always exact 30-31% (the part of system.img flashing).

I can successfully flash the other files except system.img (Android)
I can format the phone over this tool (sp flash) without any problem
Flashing the system.img alone also stops at 12-31% (my main problem rn)
I have also tried to redownload the stock rom guessing it might be just corrupted but no luck.

Flashing the other part of rom (except system.img Wink still wont boot or show any sign of power but the partially flashed system.img shows charging sign (not moving)

My phone is  Lenovo S5000-H
Stock rom: S5000_A442_102_081_140609_WW_SMS
And the sp flash tools I used are version 5.1724 and 3.1344.0.212
Drivers I installed: LenovoUsbDriver_v1.1.33MTK_USB_All_v1.0.815 seconds ADB Installer v1.4.3

Just wanted to know if did i missed some steps or something, I'm not really used to this kinds of stuffs.

Currently the phone is still dead but my pc still can detect it and I can still flash files, just except that system.img.
Support from IMS mentions about the huge file size of system.img.

I'll also attach the log, maybe it can help, thank you.

Are you able to boot the phone into recovery mode? ( recovery is vol up + power key)
Did you take note of the phone's build no before formatting it?
This post was last modified: 15-10-2018, 04:42 PM by xerxes.
Slent
Slent
Slent
Enthusiastic Member
10
16-10-2018, 02:12 AM
#3
(15-10-2018, 04:41 PM)innagee
(15-10-2018, 02:38 PM)Slent Hello guys! Need some of your help.
So here's what happen, I got bootloop keeps on rebooting at formatting; phone suddenly shutdown in the middle of hard format over recovery, so I tried to fix it with sp flash tools, at first I tried to use the 'format whole flash' (believing it was equivalent to hard format of recovery) and the phone is not opening anymore after this. Then I tried to flash the stock rom but I got some error; 'error 3149' at sp flash tools version 3 and 'error 4008' with version 5 that stops at always exact 30-31% (the part of system.img flashing).

I can successfully flash the other files except system.img (Android)
I can format the phone over this tool (sp flash) without any problem
Flashing the system.img alone also stops at 12-31% (my main problem rn)
I have also tried to redownload the stock rom guessing it might be just corrupted but no luck.

Flashing the other part of rom (except system.img ) still wont boot or show any sign of power but the partially flashed system.img shows charging sign (not moving)

My phone is  Lenovo S5000-H
Stock rom: S5000_A442_102_081_140609_WW_SMS
And the sp flash tools I used are version 5.1724 and 3.1344.0.212
Drivers I installed: LenovoUsbDriver_v1.1.33MTK_USB_All_v1.0.815 seconds ADB Installer v1.4.3

Just wanted to know if did i missed some steps or something, I'm not really used to this kinds of stuffs.

Currently the phone is still dead but my pc still can detect it and I can still flash files, just except that system.img.
Support from IMS mentions about the huge file size of system.img.

I'll also attach the log, maybe it can help, thank you.

Are you able to boot the phone into recovery mode? ( recovery is vol up + power key)
Did you take note of the phone's build no before formatting it?
I can flash the recovery and the rest of the the files (except system.img) but it still won't allow me to boot, just some vibrate feedback.
This is the same exact firmware I used before when updating my phone.
Slent
Slent
Slent
Enthusiastic Member
10
16-10-2018, 08:19 AM
#4
(15-10-2018, 04:41 PM)innagee
(15-10-2018, 02:38 PM)Slent Hello guys! Need some of your help.
So here's what happen, I got bootloop keeps on rebooting at formatting; phone suddenly shutdown in the middle of hard format over recovery, so I tried to fix it with sp flash tools, at first I tried to use the 'format whole flash' (believing it was equivalent to hard format of recovery) and the phone is not opening anymore after this. Then I tried to flash the stock rom but I got some error; 'error 3149' at sp flash tools version 3 and 'error 4008' with version 5 that stops at always exact 30-31% (the part of system.img flashing).

I can successfully flash the other files except system.img (Android)
I can format the phone over this tool (sp flash) without any problem
Flashing the system.img alone also stops at 12-31% (my main problem rn)
I have also tried to redownload the stock rom guessing it might be just corrupted but no luck.

Flashing the other part of rom (except system.img ) still wont boot or show any sign of power but the partially flashed system.img shows charging sign (not moving)

My phone is  Lenovo S5000-H
Stock rom: S5000_A442_102_081_140609_WW_SMS
And the sp flash tools I used are version 5.1724 and 3.1344.0.212
Drivers I installed: LenovoUsbDriver_v1.1.33MTK_USB_All_v1.0.815 seconds ADB Installer v1.4.3

Just wanted to know if did i missed some steps or something, I'm not really used to this kinds of stuffs.

Currently the phone is still dead but my pc still can detect it and I can still flash files, just except that system.img.
Support from IMS mentions about the huge file size of system.img.

I'll also attach the log, maybe it can help, thank you.

Are you able to boot the phone into recovery mode? ( recovery is vol up + power key)
Did you take note of the phone's build no before formatting it?

Update:
I can already access the recovery and fastboot, my bad, the phone is just lowbatt, kinda weird that it only charges over pc port, now I'm currently trying to flash system.img over fastboot, but it seems stuck at "erasing 'system'...". Screenshot taken after 10 minutes.
This post was last modified: 16-10-2018, 08:49 AM by Slent.
Attached Files
.jpg
Untitled.jpg
Size: 49.3 KB / Downloads: 7
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
16-10-2018, 09:25 AM
#5



Firstly, you need to charge your battery to about 70% or flash without battery inserted

Second thing to try is using spft v5.1516  for the flashing https://www.hovatek.com/forum/thread-13970.html
This post was last modified: 16-10-2018, 05:06 PM by X3non.
Slent
Slent
Slent
Enthusiastic Member
10
16-10-2018, 10:21 AM
#6
(16-10-2018, 09:25 AM)EMMANUS Firstly, you need to charge your battery to about 70% or flash without battery inserted

Second thing to try is using spft v5.1516  for the flashing https://www.t-flash.net/download-sp_flas...6_win-zip/

The battery is non-removable, but I can remove it anyway, with that version I still can receive error 4008.
Slent
Slent
Slent
Enthusiastic Member
10
16-10-2018, 10:33 AM
#7
(16-10-2018, 09:25 AM)EMMANUS Firstly, you need to charge your battery to about 70% or flash without battery inserted

Second thing to try is using spft v5.1516  for the flashing https://www.hovatek.com/forum/thread-13970.html

The problem is still within flashing the system.img, other files can success flashing except system.img
Guess I'll leave it charging for now till 70% or full before flashing again. Smile
This post was last modified: 16-10-2018, 05:07 PM by X3non.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
16-10-2018, 10:41 AM
#8
Lets go a bit higher with the sp ft version, maybe 4 versions higher, then try without battery
Slent
Slent
Slent
Enthusiastic Member
10
16-10-2018, 11:03 AM
#9
(16-10-2018, 10:41 AM)EMMANUS Lets go a bit higher with the sp ft version, maybe 4 versions higher, then try without battery

What version exactly, mate? I'm sorry all I know about spft are version 3 & 5.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
16-10-2018, 11:11 AM
#10



(16-10-2018, 11:03 AM)Slent
(16-10-2018, 10:41 AM)EMMANUS Lets go a bit higher with the sp ft version, maybe 4 versions higher, then try without battery

What version exactly, mate? I'm sorry all I know about spft are version 3 & 5.

https://www.hovatek.com/forum/thread-13970.html
This post was last modified: 16-10-2018, 05:07 PM by X3non.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram