Hovatek Forum MOBILE Android tijolo duro nuu A3
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


tijolo duro nuu A3

tijolo duro nuu A3

alexandregm
alexandregm
alexandregm
Newbie
4
16-10-2018, 08:10 PM
#1



Hello, I have a NUU A3. I was able to update the rom by SP FLASH TOOL 5.18, but for some reason there was the error S_FT_ENABLE_DRAM_FAIL (4032). after that my cell phone does not turn on anymore, it does not answer the call key, but it is recognized by the PC when it is connected without the battery and pressing the volume key + and when trying to DOWNLOAD it starts the red bar up to 100% and again presents the mentioned error above. I tried several tutorials without success, someone has a tip?
NOTE: If you connect it to the PC with the battery, it recognizes the cell phone and disconnects, so it remains connected and disconnected by itself, and with the device nothing happens.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
17-10-2018, 08:54 AM
#2
Was this the firmware you tried? http://www.mediafire.com/file/c6cz9f4l0z...17_6.0.zip# if not, then try it.


And you made two opposite statements, so clarify, here

'' I was able to update the rom by SP FLASH TOOL 5.18, but for some reason there was the error S_FT_ENABLE_DRAM_FAIL (4032).''
alexandregm
alexandregm
alexandregm
Newbie
4
20-10-2018, 05:31 AM
#3
(17-10-2018, 08:54 AM)EMMANUS Este foi o firmware que você tentou? http://www.mediafire.com/file/c6cz9f4l0z...17_6.0.zip# se não, então tente.


e fez duas afirmações opostas, então esclarecer, aqui

' eu era capaz de atualizar a rom por SP FLASH ferramenta 5,18, mas por algum motivo, houve o erro S_FT_ENABLE_DRAM_FAIL (4032). '
At the time that occurred hard brick I was using the last version of the SP Flash TOOL, I had already tried with the Rom of the link above but did not succeed.
Some say it's good to update with the Preloader signup, others say no. During my failed update attempt I was with the Preloader signated.
OBS: I am using translator so some sentences must be wrong.
I believe I should be making some mistake during the upgrade.
Thank you!!!!
xerxes
xerxes
xerxes
Senior Member
8,355
20-10-2018, 11:59 AM
#4
(20-10-2018, 05:31 AM)alexandregm
(17-10-2018, 08:54 AM)EMMANUS Este foi o firmware que você tentou? http://www.mediafire.com/file/c6cz9f4l0z...17_6.0.zip# se não, então tente.


e fez duas afirmações opostas, então esclarecer, aqui

' eu era capaz de atualizar a rom por SP FLASH ferramenta 5,18, mas por algum motivo, houve o erro S_FT_ENABLE_DRAM_FAIL (4032). '
At the time that occurred hard brick I was using the last version of the SP Flash TOOL, I had already tried with the Rom of the link above but did not succeed.
Some say it's good to update with the Preloader signup, others say no. During my failed update attempt I was with the Preloader signated.
OBS: I am using translator so some sentences must be wrong.
I believe I should be making some mistake during the upgrade.
Thank you!!!!

which flash option did you choose, is it download only, firmware upgrade or format + download?
try disconnecting/reconnecting the battery then power on the device or plug the phone to charge for few hours.
hovatek
hovatek
hovatek
Administrator
49,570
21-10-2018, 06:39 PM
#5



(20-10-2018, 05:31 AM)alexandregm ...I was able to update the rom by SP FLASH TOOL 5.18, but for some reason there was the error S_FT_ENABLE_DRAM_FAIL (4032)....

Please clarify what you mean.
Do you mean the first flash attempt was successful and subsequent flash attempts give error 4032?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
alexandregm
alexandregm
alexandregm
Newbie
4
21-10-2018, 11:17 PM
#6
(21-10-2018, 06:39 PM)hovatek
(20-10-2018, 05:31 AM)alexandregm ...I was able to update the rom by SP FLASH TOOL 5.18, but for some reason there was the error S_FT_ENABLE_DRAM_FAIL (4032)....

Please clarify what you mean.
Do you mean the first flash attempt was successful and subsequent flash attempts give error 4032?


the error occurred in the first attempt
alexandregm
alexandregm
alexandregm
Newbie
4
21-10-2018, 11:26 PM
#7
(20-10-2018, 11:59 AM)innagee
(20-10-2018, 05:31 AM)alexandregm
(17-10-2018, 08:54 AM)EMMANUS Este foi o firmware que você tentou? http://www.mediafire.com/file/c6cz9f4l0z...17_6.0.zip# se não, então tente.


e fez duas afirmações opostas, então esclarecer, aqui

' eu era capaz de atualizar a rom por SP FLASH ferramenta 5,18, mas por algum motivo, houve o erro S_FT_ENABLE_DRAM_FAIL (4032). '
At the time that occurred hard brick I was using the last version of the SP Flash TOOL, I had already tried with the Rom of the link above but did not succeed.
Some say it's good to update with the Preloader signup, others say no. During my failed update attempt I was with the Preloader signated.
OBS: I am using translator so some sentences must be wrong.
I believe I should be making some mistake during the upgrade.
Thank you!!!!

which flash option did you choose, is it download only, firmware upgrade or format + download?
try disconnecting/reconnecting the battery then power on the device or plug the phone to charge for few hours.


I used it: download it only, I left it all night loading the battery for testing. but it did not work too.
This post was last modified: 21-10-2018, 11:27 PM by alexandregm.
X3non
X3non
X3non
Recognized Contributor
22,062
22-10-2018, 10:07 AM
#8
(21-10-2018, 11:17 PM)alexandregm the error occurred in the first attempt

try disconnect / reconnecting the battery of the device. if its inbuilt then you'll need to loosen the device to get to the battery
hovatek
hovatek
hovatek
Administrator
49,570
23-10-2018, 11:15 AM
#9
(21-10-2018, 11:17 PM)alexandregm the error occurred in the first attempt

Do as @x3non said.
When flashing, do not hold any button while connecting to pc

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram