[gentle52]

Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir

[xerxes]

Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir

Have you tried factory resetting the phone via recovery mode?
Do you know your phone original build no. before flashing it?

Sent from my M5 mini using Hovatek Mobile

[EMMANUS]

Can you remember how you flashed? The options you chose

[gentle52]

Pls sir I downloaded infinix x608 firmware the one ending with v13 the phone now boots with about 2 hours on every reboot..... Even after the first boot.... What should I do sir

Have you tried factory resetting the phone via recovery mode?
Do you know your phone original build no. before flashing it?

Sent from my M5 mini using Hovatek Mobile

I have factory reset the phone still same fault takes more than 2 hours to boot

This is how the build number looks like before flashing
x608-ql1661abcdef-180604v15

I downloaded the file boot did phone refuse to book up. Then I downloaded the one ending with v13

[gentle52]

Can you remember how you flashed? The options you chose

Did choose any option just load the file through the normal procedure and I flashed.....

[X3non]

I have factory reset the phone still same fault takes more than 2 hours to boot

This is how the build number looks like before flashing
x608-ql1661abcdef-180604v15
I downloaded the file boot did phone refuse to book up. Then I downloaded the one ending with v13

i take it that you downloaded X608-QL1661ABCDEF-O-180604V15 from the list at https://forum.hovatek.com/thread-533.html
did you use UMT-QcFire dongle to flash the firmware?

also notice X608-QL1661ABCDEF-O is different from X608-QL1661D-O-IN
IN for the variant selling in the indian market
try flashing firmware for X608-QL1661ABCDEF-O-180406V11 and if it works then check if the phone is still running slow
lets know the outcome

[gentle52]

I did dot use umt-qcfire, I used Qualcomm flashtool
The problem now is that the phone now refuse to connect just only charging!

And I know the drivers are in tact

[xerxes]

I did dot use umt-qcfire, I used Qualcomm flashtool
The problem now is that the phone now refuse to connect just only charging!

And I know the drivers are in tact

You will need to enter edl mode before the flash tool can detect the phone. Refer to https://forum.hovatek.com/thread-21791.html

Sent from my M5 mini using Hovatek Mobile