Infinix Note 5 build X604-H633H-O-180928V246 issue
Infinix Note 5 build X604-H633H-O-180928V246 issue
(27-10-2018, 10:44 AM)X3nonThanks brother, ive seen the build online.. But I still want to make sure I do the readback successfully. I will get back to you wn am done(26-10-2018, 05:35 PM)Dio Stesso Please help me out, I'm stuck at read back 0% after sometime it brings error: status_read_data_execption (0xc0050007). What could be the problem please..
switch on the phone then switch it back off before re-connecting to the PC
(27-10-2018, 10:52 AM)Dio Stesso(27-10-2018, 10:44 AM)X3nonThanks brother, ive seen the build online.. But I still want to make sure I do the readback successfully. I will get back to you wn am done(26-10-2018, 05:35 PM)Dio Stesso Please help me out, I'm stuck at read back 0% after sometime it brings error: status_read_data_execption (0xc0050007). What could be the problem please..
switch on the phone then switch it back off before re-connecting to the PC
(27-10-2018, 11:18 AM)Dio Stesso(27-10-2018, 10:52 AM)Dio Stesso
(27-10-2018, 10:44 AM)X3non
(26-10-2018, 05:35 PM)Dio Stesso
Please help me out, I'm stuck at read back 0% after sometime it brings error: status_read_data_execption (0xc0050007). What could be the problem please..
switch on the phone then switch it back off before re-connecting to the PC
Thanks brother, ive seen the build online.. But I still want to make sure I do the readback successfully. I will get back to you wn am done
what i notice is if I try to read emmc_boot1, it does that successfully. but wen it comes to EMMC_USER, it still stucks 0%, even after reboot...
(27-10-2018, 02:58 PM)alumi4skop(27-10-2018, 11:18 AM)Dio Stesso(27-10-2018, 10:52 AM)Dio Stesso(27-10-2018, 10:44 AM)X3nonThanks brother, ive seen the build online.. But I still want to make sure I do the readback successfully. I will get back to you wn am done(26-10-2018, 05:35 PM)Dio Stesso Please help me out, I'm stuck at read back 0% after sometime it brings error: status_read_data_execption (0xc0050007). What could be the problem please..
switch on the phone then switch it back off before re-connecting to the PC
what i notice is if I try to read emmc_boot1, it does that successfully. but wen it comes to EMMC_USER, it still stucks 0%, even after reboot...
Pls can u share d link of d full rom dump , pls,I need the boot.img ,I am having d inability to read the 2nd I.e rom_2 , its just count without the progressive bar which count d mb dat is being flash stagnant but d time is counting even after reboot here, done it several times bro, same problem as urs too
Sent from my Infinix X604 using Hovatek Mobile
(27-10-2018, 11:18 AM)Dio Stesso what i notice is if I try to read emmc_boot1, it does that successfully. but wen it comes to EMMC_USER, it still stucks 0%, even after reboot...
(29-10-2018, 09:36 AM)X3non(27-10-2018, 11:18 AM)Dio Stesso
what i notice is if I try to read emmc_boot1, it does that successfully. but wen it comes to EMMC_USER, it still stucks 0%, even after reboot...
i'm suspecting that's because emmc_user is pretty large i.e 32GB or who knows if its the 64GB variant you have there
how many mins or hours did you allow sp flash tool to read before concluding it's not reading?
retry the process again, while spft is reading wait a few mins then goto the folder location where you saved the rom* check the file size of rom*
check if the file size is 0 bytes or if it has increased
if it increased then wait a few more mins then check if it increased again
let know the outcome of this
another thing you could try is to use the finish address for the last partition just above userdata, that should be system_b
it would be faster without userdata partition