Hovatek Forum MOBILE Android [Please help] Gigaset qv830 not flashing image
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Gigaset qv830 not flashing image

[Please help] Gigaset qv830 not flashing image

Pages (5): 1 2 3 4 5 Next
dimmicks
dimmicks
dimmicks
Junior Member
24
08-11-2018, 02:48 AM
#1



Hello.

I have a Gigaset qv830 and two stock ROM images and 3 scatterfiles (Not all the values are the same).  It was originally stuck on the android erase screen.  After trying to format it I get the 4010 error.  

But I can successfully download the Preloader, MBR, EBR1, UBOOT, and Logo, just not the BOOTIMG, it gets to 11% and hangs, then fails.


 I ran a full memory test and get:
Internal RAM is Blank,

External RAM: Type = DRAM Size = 0x40000000 (1024MB/8192Mb)

NAND Flash: ERROR: NAND Flash was not detected!.

EMMC:

EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)

EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001d5400000(7508MB)

UFS:

ERROR: UFS was not detected!

============ RAM Test 
Data Bus Test= OK
Address Bus Test= OK
RAM Pattern Test= OK
Increment/Decrement Test= OK

Is this a problem with the scatterfile?  I don't have another tablet to get another scatterfile. 


Any suggestions?   Anyway to manipulate the scatterfile to get it to work or manually format some sections?

Thank you,

Shannon

X3non
X3non
X3non
Recognized Contributor
22,062
08-11-2018, 02:45 PM
#2
(08-11-2018, 02:48 AM)dimmicks Hello.

I have a Gigaset qv830 and two stock ROM images and 3 scatterfiles (Not all the values are the same). ..

Any suggestions?   Anyway to manipulate the scatterfile to get it to work or manually format some sections?

Thank you,

Shannon


Where / how did you get this stock ROMs / scatter files?

Have you ever formatted the phone using sp flash tool before?

Have you ever flashed the phone using format all + download OR firmware upgrade?
dimmicks
dimmicks
dimmicks
Junior Member
24
08-11-2018, 06:08 PM
#3
[/quote]Where / how did you get this stock ROMs / scatter files?

Have you ever formatted the phone using sp flash tool before?

Have you ever flashed the phone using format all + download OR firmware upgrade?[/quote]

Hello,

I found 1 ROM/scatter file on this board and the others on links from this board.

No I have never used sp flash tools before.

Yes I tried doing all of those things before posting. That's how I found the right scatter file to download most of the files except BOOTIMG.

I must be missing something. Please help.

Thanks,
Shannon
X3non
X3non
X3non
Recognized Contributor
22,062
08-11-2018, 08:05 PM
#4
(08-11-2018, 06:08 PM)dimmicks Hello,
I found 1 ROM/scatter file on this board and the others on links from this board.
No I have never used sp flash tools before.
Yes I tried doing all of those things before posting. That's how I found the right scatter file to download most of the files except BOOTIMG.
I must be missing something. Please help.

Thanks,
Shannon

i'll take it you've not successfully formatted or flashed using firmware upgrade in sp flash tool
try dumping firmware from your phone using the guide at https://www.hovatek.com/forum/thread-13347.html
lets know the outcome
BTW after flashing preloader, is your phone still able to power on?
dimmicks
dimmicks
dimmicks
Junior Member
24
09-11-2018, 04:50 AM
#5



The start button on Miracle Box is greyed out. If I get that working I'll give you an update.
And yes, with preloader and logo downloaded it powers on, then powers off, then on, and soforth……………

Thanks,
Shannon
dimmicks
dimmicks
dimmicks
Junior Member
24
09-11-2018, 06:17 AM
#6
(09-11-2018, 04:50 AM)dimmicks The start button on Miracle Box is greyed out. If I get that working I'll give you an update.
And yes, with preloader and logo downloaded it powers on, then powers off, then on, and soforth……………

Thanks,
Shannon

Ran newer version of miracle box, then had unstable usb, got the virtual port driver, Ran miracle box as described in post and it crashes after connecting.
It does connect and says "cpu=MT6589(6583) SW=.0001 Ver=CA01.
Am I using the right scatter file? Couldn't find a MT6583. Found a generic MT6589, but the memory addresses ARE different, so I didn't try it, maybe I should??

Any help?

Thanks,
Shannon
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
09-11-2018, 06:29 AM
#7
(09-11-2018, 06:17 AM)dimmicks
(09-11-2018, 04:50 AM)dimmicks The start button on Miracle Box is greyed out.   If I get that working I'll give you an update.
And yes, with preloader and logo downloaded it powers on, then powers off, then on, and soforth……………

Thanks,
Shannon

Ran newer version of miracle box, then had unstable usb, got the virtual port driver, Ran miracle box as described in post and it crashes after connecting.
It does connect and says "cpu=MT6589(6583) SW=.0001 Ver=CA01.
Am I using the right scatter file? Couldn't find a MT6583.  Found a generic MT6589, but the memory addresses ARE different, so I didn't try it, maybe I should??

Any help?

Thanks,
Shannon

No, don't do that. Stick with miracle version 2.27.It is the most stable for now.
Use this to fix the start button  https://www.hovatek.com/forum/thread-12223.html
dimmicks
dimmicks
dimmicks
Junior Member
24
10-11-2018, 02:29 AM
#8
(09-11-2018, 06:29 AM)EMMANUS
(09-11-2018, 06:17 AM)dimmicks
(09-11-2018, 04:50 AM)dimmicks The start button on Miracle Box is greyed out.   If I get that working I'll give you an update.
And yes, with preloader and logo downloaded it powers on, then powers off, then on, and soforth……………

Thanks,
Shannon

Ran newer version of miracle box, then had unstable usb, got the virtual port driver, Ran miracle box as described in post and it crashes after connecting.
It does connect and says "cpu=MT6589(6583) SW=.0001 Ver=CA01.
Am I using the right scatter file? Couldn't find a MT6583.  Found a generic MT6589, but the memory addresses ARE different, so I didn't try it, maybe I should??

Any help?

Thanks,
Shannon

No, don't do that. Stick with miracle version 2.27.It is the most stable for now.
Use this to fix the start button  https://www.hovatek.com/forum/thread-12223.html

Miracle box 2.27 still crashes after it connects. Any other suggestions?
Thanks,
Shannon
X3non
X3non
X3non
Recognized Contributor
22,062
10-11-2018, 08:27 AM
#9
(10-11-2018, 02:29 AM)dimmicks Miracle box 2.27 still crashes after it connects. Any other suggestions?
Thanks,
Shannon

What's the crash error message, Miracle box has stopped?
Try the fix at https://www.hovatek.com/forum/thread-21268.html
OR backup using wwr method at https://www.hovatek.com/forum/thread-21970.html
dimmicks
dimmicks
dimmicks
Junior Member
24
10-11-2018, 09:35 AM
#10



(10-11-2018, 08:27 AM)X3non
(10-11-2018, 02:29 AM)dimmicks Miracle box 2.27 still crashes after it connects. Any other suggestions?
Thanks,
Shannon

What's the crash error message, Miracle box has stopped?
Try the fix at https://www.hovatek.com/forum/thread-21268.html
OR backup using wwr method at https://www.hovatek.com/forum/thread-21970.html
Hello,


No crash message, Miracle box just closes.  


Will the wwr method work if the image is corrupted?  I ask because when I received this tablet it was stuck in a boot loop.

Thanks,
Shannon
Pages (5): 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram