Hovatek Forum MOBILE Android [Please help] Gigaset qv830 not flashing image
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Gigaset qv830 not flashing image

[Please help] Gigaset qv830 not flashing image

Pages (5): Previous 1 2 3 4 5 Next
X3non
X3non
X3non
Recognized Contributor
22,062
10-11-2018, 01:59 PM
#11



(10-11-2018, 09:35 AM)dimmicks Hello,
No crash message, Miracle box just closes.  

Will the wwr method work if the image is corrupted?  I ask because when I received this tablet it was stuck in a boot loop.

Thanks,
Shannon

Wwr will work even if the phone is bricked, the important thing is to get a working scatter file directly from the phone

It will be useless if the phone has been formatted in sp flash tool before now. If you can ask the previous owner how it got bricked and what has been done on the phone then that's good

Btw is the phone still able to power on after flashing preloader from any of the three firmwares you downloaded?
dimmicks
dimmicks
dimmicks
Junior Member
24
12-11-2018, 05:10 AM
#12
Hello,
When I get to step 7 of the WwR tutorial I get this in notepad++ 

PRELOADER 0x0
{
}

and a message that says "For this platform, the first version scatter files is used"

That's all that's in the MT6589 created scatter file.  

And yes when I download the preloader and logo, it turn on, shows the logo then re-boots and does the same thing.

I'm at a loss...…

Shannon
dimmicks
dimmicks
dimmicks
Junior Member
24
12-11-2018, 06:01 AM
#13
Also, I can:
download Pre-Loader= success
download MBR= success
download EBR1= success
download LOGO= success
All 4 together= success
Anything else like UBOOT the flash hangs at 11%. But I can uncheck LOGO and check UBOOT= success.
Its like it runs out of space or something.
Anyway, its back to the connect(to pc), shows logo, then re-boot. When I unplug it, it boots, shows the logo and then re-boots. It does this till the battery dies, its non-removable.
Anything else I can try? Wwr will scan the ROM's I found on the net but I'm not sure what to do with info....

Shannon
X3non
X3non
X3non
Recognized Contributor
22,062
12-11-2018, 05:42 PM
#14
(12-11-2018, 05:10 AM)dimmicks Hello,
When I get to step 7 of the WwR tutorial I get this in notepad++ 

...
Shannon

You can use 0x80000 as partition size for reading emmc_boot ., you already carried out a RAM test in your initial post so you can use the length from the RAM test result as length for reading emmc_user
This post was last modified: 12-11-2018, 06:06 PM by X3non.
dimmicks
dimmicks
dimmicks
Junior Member
24
13-11-2018, 03:54 AM
#15



When the procedure and tried to download the new files. pre-loader loaded and it hung on the flash with the 4008 error. Back to the same problem.
Any ideas?

Shannon
X3non
X3non
X3non
Recognized Contributor
22,062
13-11-2018, 12:01 PM
#16
(13-11-2018, 03:54 AM)dimmicks When the procedure and tried to download the new files.  pre-loader loaded and it hung on the flash with the 4008 error.  Back to the same problem.
Any ideas?

Shannon

I take it you successfully got a scatter file using wwr
Use the scatter file you got to format all except bootloader then flash the remaining files from the firmware you downloaded OR use firmware upgrade option in spft
dimmicks
dimmicks
dimmicks
Junior Member
24
14-11-2018, 03:10 AM
#17
Yes I got a scatter file from wwr. Tried to format and got the 4010 error code. wwr says the scatter file I created and the one I was using are the same.
??
X3non
X3non
X3non
Recognized Contributor
22,062
14-11-2018, 09:24 AM
#18
(14-11-2018, 03:10 AM)dimmicks Yes I got a scatter file from wwr.  Tried to format and got the 4010 error code.  wwr says the scatter file I created and the one I was using are the same.  
??

It's either the ROM you're trying to flash isn't for your phone or a fault emmc chip.
You mentioned you have 2 ROMs, compare the second scatter file and see if it's different from the current one. If it then try using it to format phone

Is this one of the ROMs you have? https://yadi.sk/d/1QkL7I6dpycUT
dimmicks
dimmicks
dimmicks
Junior Member
24
15-11-2018, 05:49 AM
#19
Hi,
After comparing the scatter files I found the first one I tried was way different from the other 3, they all matched. So if I formatted or upgraded firmware with the bad scatter file is it dead? Is there any way to go in and reset the partitions etc.?
Thanks,
Shannon
X3non
X3non
X3non
Recognized Contributor
22,062
15-11-2018, 10:18 AM
#20



(15-11-2018, 05:49 AM)dimmicks Hi,
After comparing the scatter files I found the first one I tried was way different from the other 3, ...

In your initial post, you mentioned 2 ROMs and a random scatter file. If the random scatter file is the one you labeled as bad, you can discard the random scatter file - it's not needed
Your device is meant to go dead after formatting, with any of the scatter files unless it has a faulty hardware
Did you check the ROM in the link in my previous reply?
This post was last modified: 15-11-2018, 10:18 AM by X3non.
Pages (5): Previous 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram