Hovatek Forum MOBILE Android [Please help] S Colo P9 Plus Bricked
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] S Colo P9 Plus Bricked

[Please help] S Colo P9 Plus Bricked

Pages (4): 1 2 3 4 Next
raza05
raza05
raza05
Junior Member
29
25-11-2018, 03:16 PM
#1



Hi
I have s color P9 plus the phone is brick dead someone made working flash from volcano inferno tool & gave to me when I tried to flash different errors come from Sp flash versions ..like SP flash tool 5.1836 gives the error of boundary check ( pic attached ) I used SP flash tool 5.1620 it gives the error of 0xFC0  ..Sp flash tool 5.1752 gives the error of error 4032 please help me how i could fix I have an other working of same model when I connect to detect the RAM sp flash tool reads fine so the driver issue is being ruled out please help me out in this
Attached Files
.jpg
s color error.JPG
Size: 160.26 KB / Downloads: 3
.jpg
Scolor 4032 error.JPG
Size: 162.82 KB / Downloads: 2
.jpg
SP flashtool error.JPG
Size: 161.82 KB / Downloads: 4
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
25-11-2018, 05:42 PM
#2
What is the condition of the phone that has a problem now? is it totally dead or stuck on boot logo?

You stated that you have another exact copy of that phone.
Read the firmware on bin format using miracle from the working phone, and flash it still using miracle to the faulty one.
raza05
raza05
raza05
Junior Member
29
26-11-2018, 06:40 AM
#3
it's totally dead , no sign of charging As I dont have any boxes It's impossible to me to make backup ... I am afraid to try sp falsh tool as if it becomes dead during read back i ll lost two instead of one .. The area I am living has power interruptions so I cant read back with flash tool The phone is completely dead no format nothing as I have posted the screen shots its doing the samethe back made from volcano is from the working phone i have right now
This post was last modified: 26-11-2018, 06:44 AM by raza05.
X3non
X3non
X3non
Recognized Contributor
22,062
26-11-2018, 10:24 AM
#4
(26-11-2018, 06:40 AM)raza05 it's totally dead , no sign of charging As I dont have any boxes It's impossible to me to make backup ... I am afraid to try sp falsh tool as if it becomes dead during read back i ll lost two instead of one .. The area I am living has power interruptions so I cant read back with flash tool The phone is completely dead no format nothing as I have posted the screen shots its doing the samethe back made from volcano is from the working phone i have right now

That volcano backup, you might be able to flash it without boundary check errors using miracle box v2.27a + loader but pause on flashing the phone
How did this phone go totally dead in the first place? explain in full details
raza05
raza05
raza05
Junior Member
29
26-11-2018, 01:05 PM
#5



I don't have any box ...none just use sp flash tool .the phone.it was working fine & suddenly turned blank the screen was blinking I thought it might be flash issue so I downloaded from the internet a flash file of this model S-color P9 plus I tried to flash & it did very fine up to 100 % with out an issue but after that it become hard brick did nothing not even screen blinking Then I thought it might be wrong flash so I asked some one he made a copy of working phone flash he tried to flash it with volcano but negative he said it may be because of wrong pre-loader ...now it's at the stage I described earlier
X3non
X3non
X3non
Recognized Contributor
22,062
26-11-2018, 04:17 PM
#6
(26-11-2018, 01:05 PM)raza05 I don't have any box ...none just use sp flash tool .the phone.it was working fine & suddenly turned blank the screen was blinking I thought it might be flash issue so I downloaded from the internet a flash file of this model S-color P9 plus I tried to flash & it did very fine up to 100 % with out an issue but after that it become hard brick did nothing not even screen blinking Then I thought it might be wrong flash so I asked some one he made a copy of working phone flash he tried to flash it with volcano but negative he said it may be because of wrong pre-loader ...now it's at the stage I described earlier

Miracle box + loader versions don't require a hardware box

Before you try flashing the volcano ROM, disconnect / reconnect the battery of the phone [if the battery is inbuilt, loosen the back of the phone and disconnect / reconnect the battery clip] then allow to charge for a few hours. See if it's able to power on

If not then you can try flashing using miracle box v2.27a + loader
This post was last modified: 26-11-2018, 04:19 PM by X3non.
raza05
raza05
raza05
Junior Member
29
26-11-2018, 05:48 PM
#7
The boot logo or charging is not showing in display of phone should I wait for charging to appear or do as you mentioned ...please provide a valid link if you could for miracle 2.27 + loader the phone is on charging for more than 8 hours as I have tried disconnecting the battery & reconnecting
This post was last modified: 26-11-2018, 05:51 PM by raza05.
X3non
X3non
X3non
Recognized Contributor
22,062
26-11-2018, 09:37 PM
#8
(26-11-2018, 05:48 PM)raza05 The boot logo or charging is not showing in display of phone should I wait for charging to appear or do as you mentioned ...please provide a valid link if you could for miracle 2.27 + loader the phone is on charging for more than 8 hours as I have tried disconnecting the battery & reconnecting

you can download miracle box at https://www.hovatek.com/forum/thread-15700.html
see https://www.hovatek.com/forum/thread-14106.html for how to flash scatter file firmware using miracle box
raza05
raza05
raza05
Junior Member
29
27-11-2018, 07:44 AM
#9
(26-11-2018, 09:37 PM)X3non
(26-11-2018, 05:48 PM)raza05 The boot logo or charging is not showing in display of phone should I wait for charging to appear or do as you mentioned ...please provide a valid link if you could for miracle 2.27 + loader the phone is on charging for more than 8 hours as I have tried disconnecting the battery & reconnecting

you can download miracle box at https://www.hovatek.com/forum/thread-15700.html
see https://www.hovatek.com/forum/thread-14106.html for how to flash scatter file firmware using miracle box

 the miracle box is showing the error" none usb port may be driver not installed "
screen shot is attached ...please take a look & reply what other driver should I install
Attached Files
.jpg
Miracle Box error.JPG
Size: 159.46 KB / Downloads: 2
X3non
X3non
X3non
Recognized Contributor
22,062
27-11-2018, 09:55 AM
#10



(27-11-2018, 07:44 AM)raza05  the miracle box is showing the error" none usb port may be driver not installed "
screen shot is attached ...please take a look & reply what other driver should I install

Uninstall all mtk and vcom drivers using the tool at https://www.hovatek.com/forum/thread-7660.html
Reinstall vcom preloader driver using the guide at https://www.hovatek.com/forum/thread-440.html
Then retry flashing [you can also try flashing while holding vol down button on the phone before you connect to the PC]

If you still get the same error, try another PC preferably one running Windows 7
Pages (4): 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram