Hovatek Forum MOBILE Android [Please help] S Colo P9 Plus Bricked
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] S Colo P9 Plus Bricked

[Please help] S Colo P9 Plus Bricked

Pages (4): Previous 1 2 3 4 Next
raza05
raza05
raza05
Junior Member
29
27-11-2018, 01:09 PM
#11



I downloaded & install adb driver from the following thread posted
https://www.hovatek.com/forum/thread-16386.html
also downloaded from miraclebox.com the drivers were installed & didn't work
there is another link
https://www.hovatek.com/redirectcode.php...hfMTAuemlw
but when I tried to down load my antivirus blocks this
please suggest any valid link working for windows xp sp3 I am working on it this versions only I have two PC having similar version of windows updated fully
thanks for your replies it's been a lot to me
This post was last modified: 27-11-2018, 01:17 PM by raza05.
X3non
X3non
X3non
Recognized Contributor
22,062
27-11-2018, 06:49 PM
#12
(27-11-2018, 01:09 PM)raza05 I downloaded & install adb driver from the following thread posted
...

Adb driver is not needed, you are to follow the instructions in my previous reply

See https://www.hovatek.com/forum/thread-257...#pid154332
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
28-11-2018, 01:19 AM
#13
Is your PC 32 or 64 bit. If your pc is 32 bit, you can install miracle box version 2.02 as it automatically installs all the drivers you need or try miracle drivers found here https://www.hovatek.com/forum/thread-15700.html
raza05
raza05
raza05
Junior Member
29
28-11-2018, 07:18 AM
#14
(28-11-2018, 01:19 AM)EMMANUS Is your PC 32 or 64 bit. If your pc is 32 bit, you can install miracle box version 2.02 as it automatically installs all the drivers you need or try miracle drivers found here https://www.hovatek.com/forum/thread-15700.html

it's windows xp sp3 32 bit
raza05
raza05
raza05
Junior Member
29
28-11-2018, 07:21 AM
#15



(27-11-2018, 06:49 PM)X3non
(27-11-2018, 01:09 PM)raza05 I downloaded & install adb driver from the following thread posted
...

Adb driver is not needed, you are to follow the instructions in my previous reply

See https://www.hovatek.com/forum/thread-257...#pid154332

well I did try a you instructed uninstall the driver & reinstall first from your page link
https://www.hovatek.com/forum/thread-16640.html
there was error code 10 & driver wasn't installed any how I connect it with miracle 2.27 A & obviously it didnt work like before then I uninstalled it & reinstalled the previous driver which was working on sp flash tool It was successfully installed the version is v1.1236.00  I tried to connect it again with miracle but same error then I connect it with flash tool & it worked screen shots are being attached ..not to mention that I also tried with volume down key in miracle but same driver issue
Attached Files
.jpg
Miracle Box 28-11-18.JPG
Size: 134.12 KB / Downloads: 3
.jpg
Driver Installation.JPG
Size: 153.74 KB / Downloads: 3
X3non
X3non
X3non
Recognized Contributor
22,062
28-11-2018, 08:44 AM
#16
(28-11-2018, 07:21 AM)raza05 well I did try a you instructed uninstall the driver & reinstall first from your page link
https://www.hovatek.com/forum/thread-16640.html
there was error code 10 & driver wasn't installed any how I connect it with miracle 2.27 A & obviously it didnt work like before then I uninstalled it & reinstalled the previous driver which was working on sp flash tool It was successfully installed the version is v1.1236.00  I tried to connect it again with miracle but same error then I connect it with flash tool & it worked screen shots are being attached ..not to mention that I also tried with volume down key in miracle but same driver issue

look for a different PC, preferably one running windows 7 or higher
if you still insist on using SPft, then you'll take the long route
backup firmware from your bricked phone using the guide at https://www.hovatek.com/forum/thread-21970.html
you'll get a scatter file after the entire procedure, use the scatter file to flash the files from the volcano backup
raza05
raza05
raza05
Junior Member
29
28-11-2018, 10:03 AM
#17
(28-11-2018, 08:44 AM)X3non
(28-11-2018, 07:21 AM)raza05 well I did try a you instructed uninstall the driver & reinstall first from your page link
https://www.hovatek.com/forum/thread-16640.html
there was error code 10 & driver wasn't installed any how I connect it with miracle 2.27 A & obviously it didnt work like before then I uninstalled it & reinstalled the previous driver which was working on sp flash tool It was successfully installed the version is v1.1236.00  I tried to connect it again with miracle but same error then I connect it with flash tool & it worked screen shots are being attached ..not to mention that I also tried with volume down key in miracle but same driver issue

look for a different PC, preferably one running windows 7 or higher
if you still insist on using SPft, then you'll take the long route
backup firmware from your bricked phone using the guide at https://www.hovatek.com/forum/thread-21970.html
you'll get a scatter file after the entire procedure, use the scatter file to flash the files from the volcano backup
 thanks again for the reply  finding a pc higher wiindows will be a difficult task for that I have to install windows on one of my running pc it's time consuming but if there is no other option then I have too...I am not insisting on Flash tool but right now this is the only working tool I have ..if you have any other suggestion i'll appreciate ..one more thing is confusing why the same vcom driver working on SP tool not working on miracle box ?
This post was last modified: 28-11-2018, 10:04 AM by raza05.
raza05
raza05
raza05
Junior Member
29
28-11-2018, 12:58 PM
#18
I tried reading back & ram test with SP Flashtool v.5.1752  here are result attached it's same S_FT_ENABLE_DRAM FAIL (4032)  I dont know what's  damaging inside but its pretty much bad ... One more thing if any one could explain when I attached the working S-color it pops up message on task bar" MTK pre-loader device found " & installs it but when I connected the bricked one it says "MTK USB device Found " is this causing some thing for phone not to work
This post was last modified: 28-11-2018, 01:02 PM by raza05.
Attached Files
.jpg
SPTOOL Ram Fail Test.JPG
Size: 82.38 KB / Downloads: 4
.jpg
SP TOOL Read Back Fail.JPG
Size: 84.11 KB / Downloads: 4
xerxes
xerxes
xerxes
Senior Member
8,355
28-11-2018, 04:28 PM
#19
(28-11-2018, 12:58 PM)raza05 I tried reading back & ram test with SP Flashtool v.5.1752  here are result attached it's same S_FT_ENABLE_DRAM FAIL (4032)  I dont know what's  damaging inside but its pretty much bad ... One more thing if any one could explain when I attached the working S-color it pops up message on task bar" MTK pre-loader device found " & installs it but when I connected the bricked one it says "MTK USB device Found " is this causing some thing for phone not to work

This might be due to an incompatible scatter file.

Sent from my M5 mini using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
28-11-2018, 09:38 PM
#20



(28-11-2018, 12:58 PM)raza05 I tried reading back & ram test with SP Flashtool v.5.1752  here are result attached it's same S_FT_ENABLE_DRAM FAIL (4032)  I dont know what's  damaging inside but its pretty much bad ... One more thing if any one could explain when I attached the working S-color it pops up message on task bar" MTK pre-loader device found " & installs it but when I connected the bricked one it says "MTK USB device Found " is this causing some thing for phone not to work

"MTK USB device Found" -- try updating that driver to vcom preloader driver using the guide at https://www.hovatek.com/forum/thread-16839.html
if it still doesn't work then you'll need to flash preloader.bin to get the phone to be detected as preloader

try using latest SPft to perform readback

one more thing,
when I attached the working S-color -- is the device the exact same model as your bricked phone? ie P9 plus
if yes, skip reading back from the dead phone instead readback from the working phone
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram