Hovatek Forum MOBILE Android M-net Power 1 brick
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


M-net Power 1 brick

M-net Power 1 brick

27-11-2018, 10:34 PM
#1



Hi everyone,
Today I turned off my M-net Power 1 and it does not turn on any more by charging signals when connected to the charger.
I turned it off to install the twrp but not having the drivers returned me error and therefore did not flashato anything.
When I try to install a firmware with SP Flashtool it always gives me error "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Also trying with your guide to install the drivers by removing the driver verification from always this error.
How can I solve?
Thank you
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
28-11-2018, 01:03 AM
#2
You stated that you turned it off to try and install twrp

How did you try to install twrp?
Where did you get the twrp from?
Did you try to install twrp before or after you discovered that the phone no longer comes on?
Have you tried disconnecting and reconnecting the battery then charging?

Note that to remove the battery, you need to loosen the device the disconnect / reconnect the battery clip .
This post was last modified: 28-11-2018, 01:07 AM by EMMANUS.
28-11-2018, 01:33 AM
#3
I found twrp on Xda but not installed.
I disxovered After flash but It don't happeen for error i said First comment
I can't remove battery.
Do you have M-net Power 1 stock firmware link?
Thanks
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
28-11-2018, 02:16 AM
#4
(28-11-2018, 01:33 AM)fabioitalia1995 I found twrp on Xda but not installed.
I disxovered After flash but It don't happeen for error i said First comment
I can't remove battery.
Do you have M-net Power 1 stock firmware link?
Thanks

You said you did not install twrp, then you also discovered phone did not come on after flashing.
The question is , What did you flash?

About the link; it is not the most important thing now, as your phone may still be salvaged through other means which is why you have to try and open the phone , disconnect and reconnect the battery.
X3non
X3non
X3non
Recognized Contributor
22,062
28-11-2018, 08:39 AM
#5



(28-11-2018, 01:33 AM)fabioitalia1995 I found twrp on Xda but not installed.
I disxovered After flash but It don't happeen for error i said First comment
I can't remove battery.
Do you have M-net Power 1 stock firmware link?
Thanks

you need to loosen the back of the phone in order to disconnect / reconnect the battery [if you can't then take it to someone who can] OR you leave the phone to charge until it shows the charging sign. refer to https://www.hovatek.com/forum/thread-808.html
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram